Thread: how to configure router to auto dial

This procedure is for MT880:

open http://192.168.1.1/
Goto ATM Setting
Set
Connection Type: PPP
PPPoA/PPPoE: PPPoAPPPoE
Username: <your user name>
Password: <your password>
Use DNS: Enabled

Now Submit this
Then click on small Magnifier glass icon in the last in front of Status, a new window will open, in then windows click on Always On and then submit

Then click on
Other Setting->DNS
here set the following:

DNS Relay: Enable
Primary DNS Server: 61.1.96.69
Secondary DNS Server: 61.1.96.71

Now you need to setup your network
Go to Internet Protocol Properties and set the following:
IP address: 192.168.1.2
Subnet Mask :255.255.255.0
Default gateway: 192.168.1.1

Preferred DNS Server :61.1.96.69
Alternate DNS Server: 61.1.96.71

Thats it and your are done.

Hope this helps someone.

so when will it autodial? what exactly is triggering the autodial..can you please give these details? can you also set it to disconnect?

i m using SIEMENS C2110 MODEL OF MODEM CAN U TELL ME THE WAY TO CONFIG.. IT TO AUTODILER MODE.............

very similar to what admin posted... Look for WAN settings

@neil, it will be difficult to guide you step by step as I do not have the guide; and the guide also may be outdated (to an extent). There are many posts on PPPoE configuration for different routers. I will advise to read them and learn the concepts and basics.

Your modem screens will be different but most of the things will be similar.

in siemens c2110 modem go to configuration-->internet.there you should see 6 connections with bridge_0_35 as the last connection.click on red pencil(edit)in front of it & you can change the connection type from bridge to pppoe.rest is self explanatory.don't change any other setting if it is already working in bridge mode.you just need to enter your bsnl username/password(without @bsnl.in i think) for pppoe mode.

I can open not link(ip address of modem) so that I am unable to make my modem always on. I have to dial up only.
Please help

hi....can u please tell me how to autodial it on TAD 100 modem?

Originally Posted by sumit85

hi....can u please tell me how to autodial it on TAD 100 modem?

Which Is This modem..??TAD100?
Have you got it from data1..???
reply