Thread: Need solution for "Limited Connectivity"

Hai,
i'm here to find a solution for my problem.I'm using Windows Vista Ultimate(32 bit).When i connect to internet and My network connections shows Limited connectivity.Here is the ScreenShot of it...



And now i'm using Wired connection(not wireless).

Thanks in advance

The picture shows tha tur system is a part of LAN Setup. If u wish to share the DATA One (On Vista) on other computers then u must share ur DATA one connection. I am also using the same setup.

Also the limited connectivity is due to IPv6. If the above method is not successful then try diabling IPv6.

you need to upgrade your router firmware,coz vista's new network stack
or you can assign a static ip
click on veiw status
->properties
->internet protocol version 4
->properties
->select use the following ipaddress
->ipaddress - 192.168.1.20
->subnet - 255.255.255.0
->gateway - 192.168.1.1 (assuming this is your modems ipaddress )
->dns server - 192.168.1.1 (only if you dial the connection through your modem)

this should solve the limited connectivity

Assinging a static ip for the LAN card should solve this issue.

Originally Posted by (-N-)

you need to upgrade your router firmware,coz vista's new network stack
or you can assign a static ip
click on veiw status
->properties
->internet protocol version 4
->properties
->select use the following ipaddress
->ipaddress - 192.168.1.20
->subnet - 255.255.255.0
->gateway - 192.168.1.1 (assuming this is your modems ipaddress )
->dns server - 192.168.1.1 (only if you dial the connection through your modem)

this should solve the limited connectivity

Now connection is like this


But is it ok with Local Only?
As u mentioned above i've changed my settings.Is this acquiring Static IP??
But i'll regularly Use Rapidshare (you know disconnecting &Connecting)..i've heard that if I use static ip will not allow this.

And may i know How to upgrade my router firmware??(plzzzzzzz)
As of Now, Everything is same as old changing "Limited Connetivity" to "Local Only"
Thanks for u Time

You would still get a new IP every time you reboot your router as it is an adsl connection and bsnl provides dynamic IP's for residential connections.

So rapidshare is all yours

i think u are using a automatic configured ip.

try setting ur ip address to 192.168.100.1 and
subnet mask to 255.255.255.0

i am sure this will work....

Originally Posted by niraj8241

i think u are using a automatic configured ip.

try setting ur ip address to 192.168.100.1 and
subnet mask to 255.255.255.0

i am sure this will work....

i don't know what happened but..it is still LOCAL ONLY!!
Can u tell me what it should be??
Network changed to Network 2 and BSNL to Bsnl 3 due to changing these settings..is it ok!!

Well i dont think that there should be any difference.. if you are able to access every site then you should not worry about it.

Originally Posted by Speed

Well i dont think that there should be any difference.. if you are able to access every site then you should not worry about it.

Thank U

first of all u delete ur dialer(BSNL). and once disable the lan connection and then re enable it. then u go to run and type netsh winsock reset. after then u enter the ip address as 192.168.100.1 and subnet mask as 255.255.255.0. save the settings and restart the computer.