India Broadband

Originally Posted by whitestar_999

karthiktha! bridge mode can not be used for simultaneously connecting more than one computer to net.in bridge mode you have to simply disconnect & then reconnect without rebooting the modem.this can be done by creating 2 batch files(connect & disconnect) & then running them at scheduled times using windows task sheduler.

Originally Posted by ozdesi

OS: Windows XP Pro
PC: Desktop
Plan: Dataone Home 500
Connection: Ethernet (not tested with wireless)
Browser : Internet Explorer 7.0 (IE7)
Modem: Ustarcom WA3002G4
Firmware Version: WA3002G4-0021.01

This method will be handy if you have above configuration and often use Firefox 9or any other browser), instead of IE. Not sure if this will work for you if the configuration is different.

Open IE7
Enter 192.168.1.1 in the address bar and hit enter.
When prompted enter Username "admin" and Passowrd as "admin" (or whatever you have saved previously)
Make sure you select "Remember my password" ( this is very important step)
Click OK and let the page load completely.
Now close the browser window.

Open IE7 again.
Go to Tools>Internet Options>General>Homepage
Enter "http://192.168.1.1/rebootinfo.cgi" into address bar (remove previously saved home page URL if you prefer) and click Apply and then OK.
Press F5 and wait for few seconds and check if the modem reboots.(how to check: DSL, Internet and WLAN lights on the modems front panel go off one by one and come back momentarily)
Close IE7.

Now simply using windows Scheduler (Start>All Programs>Accessoris>System Tools>Scheduled Tasks), schedule to run IE7 everyday at 2:10AM and 7:50AM.

Voila!

Originally Posted by talwinder

i dont think this will work at all coz every time no matter even if you have saved the password in ie or ff a confirmation dialog will still appear and you will have to click ok to get into router.