Thread: Solution for multiple machines connecting to same BB connection

Can u send ur guide to me on prasmin@yahoo.com

Originally Posted by prasmin

Can u send ur guide to me on [email deleted]

Are you not able to download the same?

I can't unzip the file after downloading. Getting invalid archive file.

I am able to succesfuly connect one laptop wireless. when I try it on the second
laptop I am getting phone line busy when dialing PPoE.

Thanks for any info. Btw my wireless modem is Belkin.

Originally Posted by NumerUno

I can't unzip the file after downloading. Getting invalid archive file.

I am able to succesfuly connect one laptop wireless. when I try it on the second
laptop I am getting phone line busy when dialing PPoE.

Thanks for any info. Btw my wireless modem is Belkin.

There must be something wrong at your end. Try downloading again or send a message to admin.

You cannot connect multiple machines when using a dialer. A dialer means that you have configured the modem in bridge mode. Configure it in PPPoE mode.

Originally Posted by just4kix

There must be something wrong at your end. Try downloading again or send a message to admin.

You cannot connect multiple machines when using a dialer. A dialer means that you have configured the modem in bridge mode. Configure it in PPPoE mode.

Just4kix thanx for the reply. My modem is configured in PPPoE mode.

for encapsulation mode I have LLC/SNAP-Bridging and Vc/MUX. I picked brindging one. I will try with VC/MUX

Dear friend

I have question for about networking courses. I have done intermediate and i am interested in networking but i am so confuse about networking institute because in NCR lot of private institute( NIIT, ICMA, IIHT, and IIJT..........)so which institute i'll prefer for education and every institute will been provide me CCNA, security program, MCSE

Please could you tell me new courses

Originally Posted by sumit012

Dear friend

I have question for about networking courses. I have done intermediate and i am interested in networking but i am so confuse about networking institute because in NCR lot of private institute( NIIT, ICMA, IIHT, and IIJT..........)so which institute i'll prefer for education and every institute will been provide me CCNA, security program, MCSE

Please could you tell me new courses

____________
sumit
outsourcing

I cannot comment on the standards and reputation of the institutes. But if you are really interested in networking the certification "Cisco Certified" will go a long way.

Thank You for very valuable information

hi,
the ZIP file attached is corrupted. i tried downloading in from both my laptop and desktop, but i get the same "archive corrupt" message in both systems. i suggest you upload the file again...
thanks

how different is this wireless config in this page, from the wireless config specified in the other page which is: setup of ADSL modem/router UT-300R2U-linksys wireless router...?

Originally Posted by nikhilck

hi,
the ZIP file attached is corrupted. i tried downloading in from both my laptop and desktop, but i get the same "archive corrupt" message in both systems. i suggest you upload the file again...
thanks

OK. I have been told by many folks that downloading is a problem, file is corrupt, etc. My advise: turn off download managers and try by standard windows download.

Originally Posted by nikhilck

how different is this wireless config in this page, from the wireless config specified in the other page which is: setup of ADSL modem/router UT-300R2U-linksys wireless router...?

The two posts are similar in some ways but different in some essentials:

In the post "Setup of UT-300R2U with WRT54G", the UT-300R2U is setup in bridge mode and WRT54G in PPPoE mode. In the post "Solutions to multiple PCs ...", the UT-300R2U is configured in PPPoE mode and WRT54G in Bridge (automatic DHCP) mode.

@just4kix: which one of those two is better for use with a wireless router?. right now i've configured the BSNL Modem in bridge mode and linksys router in PPPOE mode.

Originally Posted by nikhilck

@just4kix: which one of those two is better for use with a wireless router?. right now i've configured the BSNL Modem in bridge mode and linksys router in PPPOE mode.

It depends. For port forwarding, BSNL modems do not give options such as virtual server (on the newer models). Hence it is better to have BSNL modem in bridge mode and Wireless modem in PPPoE mode.

But other than that, it makes no real difference. Just go with whatever is comfortable for you.

Please continue this discussion here (Solution for multiple machines connecting to same BB connection)

thnx just4 kix...

Hi, Im new to this forum. Im plannin to take 750 UL with wireless modem.
Now I want to use it to my Desktop as well as my laptop which MacBook (Macintosh). now If I ask BSNL guys while installing to make it possible to two way connection, Will those guys help me? Or we have to figure it out by our self for connecting to my laptop?
Plz help guys...

Again great form for the discussion for BB...

Cheers

Originally Posted by samcreedy4

Hi, Im new to this forum. Im plannin to take 750 UL with wireless modem.
Now I want to use it to my Desktop as well as my laptop which MacBook (Macintosh). now If I ask BSNL guys while installing to make it possible to two way connection, Will those guys help me? Or we have to figure it out by our self for connecting to my laptop?
Plz help guys...

Again great form for the discussion for BB...

Cheers

One post is enough please. Go through the many guides in "Broadband How To" section and you will probably get answers to most of your queries.

hey i am unable to open the link 192.168.1, i am using wa3002g4 modem. please help me to configure my modem to run net on both my laptop and desktop simultyaneously

very good information very useful one

Hi there,
I wasn't able to connect through pppoe to my router, and hence was not able to browse from my wifi enabled nokia.
With the help of your guide, i realized my mistake of not entering my broadband user name and password when prompted for in pppoe settings.

Now, my bb on the lap is always on and hey, i can access the net on my wifi phone as well.

Many thanks.

Bye.

Hi , Plz send the guide on my email id . I am not able to download it (gives some error).
I have a utstarcom-wa3002g4-router and have two [aptops (both wifi) whom i need to connect. One is already working fine but could not get how to add the other one. Every time i try, it says there is IP coflict?

Do help

This may be of some use

UTSTAR WA3002-G4 quick reference

@smeetd
Also after referring links given in above post @meetdilip
(A)
You should connect in "Always On' PPP/PPPoE mode.
(userID/PW entered in WAn page of modem)
(B)
Enable DHCP ( seen usually in LAN menu page)
Give a range say 192.168.1.3 to to 192.168.1.10
(C)
In computer/laptop network/WLAN /properties/tcp/ip/properties
Select obtain Ip address automatically
Apply SAVE.

hi just4kix!!! really really thanks for ur guide!! tis s really awesome!!

Thanks xx1by. Welcome to the forum.