Thread: Huwei MT882 modem on Airtel

hi..
i have a bsnl modem, i am trying to configure on airtel network. but i am not able to get the link.
i tried doing the settings to 1/32.. by 192.168.1.1
Can someone explain how to setup BSNL modem on Airtel network????

or mail me the solution to vivek.ahuja@aol.in

bye

what type of service u are coosing, wether bridge or something else

i have unlimited internet connection. i choose ppoe u tell me the settings ...that is to be done..to use bsnl modem on airtel .......

PPPoE Generic Settings:

PVC Interface = PVC-0
Operating Mode = Enable (This means Infrastructure mode)
VPI/VCI = 0/35
Encapsulation = LLC
Default Routing = Enabled
DHCP = Enabled
NAT = Enabled
MTU = 1500
IGMP = Disabled

the setting u have told me..is this for configuring bsnl modem on Airtel broadband?????????
.i wish to configure bsnl modem on airtelbroad.....?
i have bsnl huwui M882 modem....pls tell

when i asked airtel customer care they told me VPI/VCI = 1/32....what other settings...

bye
Vivek

.is this for configuring bsnl modem on Airtel broadband?????????
.i wish to configure bsnl modem on airtelbroad.....?
i have bsnl huwui M882 modem....pls tell

when i asked airtel customer care they told me VPI/VCI = 1/32....what other settings...

Try VPI/VCI = 1/32 first and if they do not work try 0/35.

Please run the thread in any one section. I have just replied to the same problem in a simliar thread started by you in the other section !