India Broadband Forum

waakaaw

Helo every1 ,

I am using BSNL broadband since 1month,

Modem - UT300R2u
using connection as it is provided by Tech - engineer.

And after facing this problem i changed to open dns also but no result,

and i tried to ping the webpages but " REQUEST TIMED OUT" msgs

and finally i tried and changed MTU using windows help/support to
MTU-1460(decimal). no use...

Friends plzz help me out .... at least figure me the problem so that i can google a solution for that. Atleast if itz possible can u save the default settings and send it to me ???? so that i can update it ??

Thanq

kronos047

First Of All Mind Ur Spellings........and Coming To Ur Problem Even My Broadband Sometimes Does Not Connect To Websites Which End Wit .org .net Its Due To The Dns I Was Informed By The Bsnl Technical Ppl.....try Calling 18004241600 N Request For A Different Dns..........i Hope This Will Solve the Problem.......

waakaaw

opps apologies for that i thaught every1 is verymuch gel with those websites, anyways thanq for the suggestion.

bhvm

The MTU Value needs to be changed.

Open the Configuration page>>>>go to the Setup>>>

Select BSNL>>>>>change the MTU value from 1492 to 1452>>>apply

Go to tools>>>>system Commands>>>>click save all.

leonjohn2910

Hey Bro how do u do the above??? can u pls advise?

bhvm

What is the brand and Model of your modem?
That setting is for D-Link modem.

leonjohn2910

im using a TATA WiMax connection & it does not come with a modem .. infact i use a wireless router which is a NetGear WG624 v4 model.

bhvm

Sorry,
These settings are not available for WImaX.

Try open DNS-
OpenDNS | Providing A Safer And Faster Internet

Follow their guide to set open DNS on your laptop.

BTW, how is TATA Wimax experience?
Costs an arm and a leg...Dose'nt it?

essbebe

@leonjohn 2190
To change MTU
try tcp/ip optimizer from speedguide.net.


Opendns :
Start /Network /LAN or wireless link
Properties
TCP/IP
Properties

IN DNS column
enter
208.67.220.220
208.67.222.222
Apply SAVE.

Para two:
Are you are getting only a RJ45 cable from the Wireless installation?
In the box in the antenna installed
is there is a modem using PoE ( Power over Ethernet )
Please confirm.

REF:
Fixed and Portable WiMAX - StarMAX – 802.16-2004 WiMAX broadband solution - Harris Stratex Networks

PowerDsine PD-3001/AC - Power Over Ethernet from Universal Networks

http://www.indiabroadband.net/tata-i...assword-3.html (TATA WIMAX BB FEEDBACK and Request for router configuration password !)

thandermax

Usually the wireless router will have a configuration page (like 192.168.0.1) . There should be a option to change the MTU (The chunk size of ur data) value.

U need to change the MTU of the wireless router and/or ur PC .

To change ur PC's MTU open up command prompt

type : netsh interface ipv4 show subinterface
this will show all the network adapter's MTU value
for eg

MTU MediaSenseState Bytes In Bytes Out Interface
------ --------------- --------- --------- -------------
4294967295 1 0 447844 Loopback Pseudo-Interface 1
1400 1 273076969 8559595 Wireless Network Connection
1500 5 0 0 Local Area Connection
1500 5 0 0 Bluetooth Network Connection



now suppose we need to change the MTU value to 1452 of "Wireless Network Connection" interface, then

type : netsh interface ipv4 set subinterface "Wireless Network Connection" mtu=1452 store=persistent