Thread: UT300R2U white Configration Help

Can any body help me in this My Bsnl Connection Doesnt Work from few days even Huawei Modem white is not working, Sometimes after reconfiguration Huawei Modem works Tried that a couple of times but even thats not working Can somebody help me fst Mob No 9900419397.want help fast . BSNL GUYs Have been calling them from past 2 days when connection was on & off.But they have not connected to me yet They are hopeless Nothing new in that....
Somebody here can surely help i think...............

need help buddies help me am on win 200 pro...........

Probably something wrong with your configuration.. ??Check whether your phone line to the modem is working.. Make sure you entered the correct username/password.. username should be username@dataone.in ..
Give more details about your current configuration..

PS:be careful while displaying your mobile phone no on the internet..Very dangerous!!!

cheers...

Originally Posted by superprash2003

.. username should be username@dataone.in ..

No. Just use your 'username' without the '@dataone.in' suffix.

There are many guides in this forum for configuration of UT-300R2U. You can choose the Bridge mode or PPPoE mode.

are you sure about that just4kix??cause i use it with the @dataone.in and it works!!! maybe it works both ways

I am using without the suffix. So I guess, it works both ways but probably depends upon the modem also.

Can you let me know the Configuration details of the modem please...

Originally Posted by parshanth

Can you let me know the Configuration details of the modem please...

Were you addressing me? If yes, my BSNL modem is UT-300R2U (configured in PPPoE mode) and I have Linksys WRT54G (configured in Auto DHCP mode). The settings are described in some of my sticky posts (guides) in this forum.

thank you buddy I am asking for configuration Details. Please Help me in Detail please> I am A layman for Ut300R2u...............

I just have the UT300R2U mODEM i dont know anything about Linksys WRT54G (configured in Auto DHCP mode). If u kind enough can you tell me more jkix................

Originally Posted by parshanth

I just have the UT300R2U mODEM i dont know anything about Linksys WRT54G (configured in Auto DHCP mode). If u kind enough can you tell me more jkix................

Just look at the 'sticky' posts in this forum on how to configure and setup - there are couple of them. Just refer to the sections dealing with UT-300R2U in those guides ...

I saw that but i dont have Linksys WRT54G i dont know wht that is also..........................

Originally Posted by parshanth

I saw that but i dont have Linksys WRT54G i dont know wht that is also..........................

Linksys WRT54G is a wireless router and is meant for wireless networking. You don't need it. From the guides, just follow the steps till you reach Linksys related stuff. You should be all set.