India Broadband

raja_hawk1

hey guys need help to configure type I modem from SIEMENS. please help me to setup the Modem......

rock_daring

Are u using C2110 Modem.

raja_hawk1

yes i m

rock_daring

First Conenct ur modem with the PC using Ethernet/USB (Ethernet Recommended).

Now open LAN CArd Settings and open TCP IP Settings.

Under IP Address Type Following: 192.168.1.2 (2-255, whichever u like)
Subnet mask: 255.255.255.0
Gateway: 192.168.1.1

Preferred DNS: 61.1.96.69
Alternate DNS: 61.1.96.71

Now in ur browser open 192.168.1.1. This will open the Siemens Configuration page.

Switch to Configuration>Internet (Left Side of the window).

Under list of Connections Locate the connection with (0/35 Parameters).

Click on Configure (Small Icon near on the right side of the connection)

Type ur user name and Password there. (For PPoE Connection type. Else u have to set a dial up connection for bridge type.)

click connect. If, all goes well enjoy.

rock_daring

No need to connect every time since PPoE connection establishes the Connection to the internet automatically without the need of a computer.

niraj8241

enter router configuration by entering 192.168.1.1 in ur internet explorer.

add a new wan configuration and enter the following deatails:

vpi :- 0

vci :- 35

type : pppoe

encapsulation :- llc or mux

ur bsnl username and password.


save and reboot the router.


dont forget to rebbot it using the option of rebooting in that page only

whitestar_999

if that modem is supplied by bsnl it should have all the settings already.you just have to choose bridge or pppoe mode.bridge mode is recommended for limited plans & pppoe mode is recommended for unlimited plans though it is entirely your choice.

__________________
"They say that if you play a microsoft disc backwards you hear satanic messages, thats nothing: if you play it forwards it installs windows"

mannuforall

Hi,
What is the setting for moradabad, uttar pradesh on same modem, or this will same for moradabad?

whitestar_999

in bsnl provided siemens c2110 modem you just have to change the connection type(configuration---internet---click on red pencil(edit) in front of last connection 0_35_.click next & change in configure connection type protocol to bridging).don't change any other settings.click next until you reach final screen.click on apply changes.after that restart modem.once your modem is set you have to create a connection in windows using internet connection wizard.

mannuforall

Hi,
On typeing 198.168.1.1 in brower it does not opens any Siemens Configuration page.
Plz help coz I'm still have the problem. When I connect to net their is no bytes revieve or sent. Sometime revieve/sent some bytes but then stop atutomatically.