Thread: Modem Drivers

hi there,
BSNL has just launched its dataone service in my area.
they supplied me a ZTE ZXDSL 831AII adsl modem.

But when i am connecting it with USB... it searchs for drivers and finally failed to do so.
even MODEM has no Drivers CD with it?
Can any one provide me the drivers ..
and plz as i am new to this connection..please tell me how to configure it as i am running a cyber cafe with 10 systems and a HUB..

thanks in anticipation plz..

anyone help me out plzzz.

moderators plz do something

if you have a LAN card then better use it instead of USB.. any reason for using only USB??
and for your cyber cafe.. just make sure your modem is set to dhcp and specify a range eg. 192.168.1.2 to 192.168.1.15 and then connect it to the hub.. and connect all other pcs to the hub!!

THANKS FOR YOUR KIND REPLY...IT MEASN I DONT HAVE NEED FOR USB CABLE IF I AM CONNECTING TO LAN CARD...

LET ME KNOW ONW THING MORE..

I CANT ABLE TO OPEN 192.168.1.1 TO CONFIGURE MY MODEM..
WHAT IS THE PROBLEM?

ANYWAYS I AM TOTALLY CONFUSED WITH BROADBAND CONFIGURATION.

CAN WE CHAT IN DETAIL IF U HAVE TIME FOR THAT ...



please guide me step to step to set my cyber cafe..

i m waiting

Do away with the usb cable as superprash2003 earlier advised you.. You wont need any cd or drivers while using an ethernet cable.

then turn the power on on your thinggie and go to http://192.168.1.1/ and you should be able to do your settings part.

*** I dont like your idea of using this phone number as your id.. I am going to change it for you.. let me know what do you want as your id. And we dont allow e-mail addresses or messenger id's to be posted in here.***

Thanks

Here is the drivers u need :-
Attachment 76


Enjoy bro

sorry for that..

really sorry. i will not do the same mistake again.

but please guide me step by step to configure whole the process so that i can share the internet over my cafe.

i am not able to open 92.168.1.1 it says .. page cant displayed.even everything is connected well

very much frustrated..as i m new to this thing.

plzzzzzzzzzzzzzzzz.

Does your computer say local area connected? (Thats if you have taken the first step of creating connection in your network connections option)

If you havent done that then just go to network connections and click on the option which says create a new connection and just follow the steps.

Give us a shout if you still have any issues.

**Just out of curisoty : You are using an MTNL cdma wireless connection right now and you have a BSNL land line connection with an adsl connection on it? I didnt know Mtnl and BSNL networks overlapped each other.. or you somewhere on the border of NCR?

A very big thanks to TANMAY for being so considerate and providing the drivers needed.

You can now try the usb way as well after installing the drivers.

If your shop is anywhere near Uttam nagar I can pop in to set your stuff for free as I don't have anything better to do right now

It is o.k. admin

I too don't get the C.D with the modem and have to take it from them..

Here is the Manual for ZTE ZXDSL AII-:
Attachment 77

tHANKS TO YOU TANMAY ..

REALLY THANKS..
RIGHT NOW I AM BUSY WITH SOME MORE STUFF..
WILL TRY TO FOLLOW UR GUIDELINE.
IF WILL HAVE ANY PROBLEM WILL CONTACT U..

AND ADMIN : I AM NOT FROM UTTAM NAGAR BUT FROM HIMACHAL PRADESH.

THANKS IN ANTICIPATION PLEASE.

now i am able to open 192.168.1.1..

do i need to configure the settings there for the first time?

and when i am trying to connect to connection(WAN MINIPORT PPPOE) ..it says error no. 678..the remore computer did not respond.

Also under netwrork connection and two more connections are created :
One is under Internet Gateway (internet connecton)

and one under local area connection (IAD LAN MODEM)

whats there purpose?
help needed

for this error :

Check your TCP/IP settings on your computer first :
IP Address=192.168.1.10
Subnet Mask= 255.255.255.0
Default Gateway=192.168.1.1
DNS= 61.1.96.69 and 61.1.96.71
If all this seems ok and your error still persists then shout back we will look at other possibilities.

yaa everything is same as u told me . . . . still the problem..

problem is still as it is ..

would i have to configure the ADSL Modem also ??

by 192.168.1.1 ??

if is it so ? thn let me know ..wht settings i have to modify ..if we suppose that my user name and password both are 9816063641.

Your settings are all ok ...

This might sound stupid but could you reboot both your modem and pc and try connecting again. Give about a min or so after your modem is on before you try to reconnect.

ok.... let me know one thing .. as i am also using dial up right now ...
will it effect?

without entering the settings given by u ... can i connect to Net ?? or not ?

hey .. were you able to sort it out?? sorry i couldnt hang around that time....are you able to access the internet properly now??.. do you have a seperate modem and setup at your cybercafe.. or is this part of the cybercafe??

Originally Posted by superprash2003

hey .. were you able to sort it out?? sorry i couldnt hang around that time....are you able to access the internet properly now??.. do you have a seperate modem and setup at your cybercafe.. or is this part of the cybercafe??

no i m still not able to connect it to net.
first of all it is only need that it will connect in one PC..
after that depends on sharing
but its not connecting in one PC too
saying error msg : 678.

also showing these connections in my network properties :

[IMG]c:/v[/IMG]

well i cant see the pic unfortunately.. could you just post the links to the pic.. you can upload the pics on to some site

Originally Posted by superprash2003

well i cant see the pic unfortunately.. could you just post the links to the pic.. you can upload the pics on to some site

from what i can see.. you are using bridge mode...try changing it to ppoe mode.. type 192.168.1.1 then look for WAN settings.. change it from bridge mode to PPOE mode in the username type yourusername@dataone.in(if you are a old user).. or yourusername@bsnl.in(if you are a new user).. or just yourusername(incase the above 2 dont work)... obv you have to replace yourusername with your bsnl username...then type password...then save/reboot...then you wouldnt need to dial to get connected to the internet.. just switch on your modem and you can start using the internet..

Visit this link to see the snapshot :-
ImageBam - Fast, Free Image Hosting and Photo Sharing

and let me know how to configure them ..