Thread: Urgent PLS HELP! how to portforward modem UT300R2U

Please help.Help me to portforward ut300r2u.In my router settings, there is no virtual server after NAT tab

Use DMZ for a specific IP address (this should be your PC's IP address). All ports will be forwarded by default.

1)type 192.168.1.1 in your browser
2)type "admin" "admin" for username and password
3)go to "advanced setup" "NAT" "DMZ Host"
4)type ur ip address

[ ur ip address can be found out by
*click on start
*click run
*type cmd
*in the 'command prompt' type " ipconfig " (ex c:\..........>ipconfig enter)
*note down the ip address (ex 192.168.1.25)
]
5)now click save/apply
6)click on "management" click "save/reboot"


Now all ports are opened in ur Modem

Now you should open one port in Windows Firewall (or any other)
for utorrent

1)"start", "control panel" , "security center" , click on "Windows Firewall"
2)click on "exceptions tab"
3)click on "add port"
4)give any name (ex your name )
5)give a port no (ex 50000 )
6)click OK
7)check whether it is "checked" in "programs and services"


1)now goto utorrent
2)click on "options" "speed guide"
3)in the "current port" type (ex 50000)
4)click on "use selected settings"
5)now click "test if port is forwarded properly"

before that i backuped the router config so i am able to re establish connection.Do u have any other methods.

Thanks a lot guys.
portforward.com gave me a headache

thanks
its so essey if it you knows else it is difficult
I get solved my problem