Thread: How to setup Wireless Lan with Siemens C2110 modem with netpassage 27G

Hi
I have BSNL broadband 250 single user plane and asdl modem siemens c2110 and wireless router compex netpassege 27g any one help to setup wireless as well as wire lan

manoj

are you using bridged mode or ppoe mode?? does your internet work as soon as you switch on your modem or do you need to dial from your computer?

Thanks
I am using bridged mode and required to dial up computer

I do not have the guide for your wireless router (compex netpassege 27g). So I cannot guide you step by step.

Connect your wireless router to c2110 (LAN port of c2110 --> Internet port of wireless router: via ethernet RJ45 cable). Now you can setup in one of the following two ways:

a) keeping current c2110 settings intact (bridge) mode, you could setup the wireless router in PPPoE mode.

........................... OR ...........................

b) You could setup the c2110 in PPPoE mode and NetPassage 27g in bridge mode.

The PPPoE settings should be as follows:
VPI = 0
VCI = 35
Connection Type = PPPoE/PPPoA
Encapsulation = LLC
Username = <your bsnl username>
Password = <your bsnl password>
Service name = <blank>
Authentication = Auto
NAT = Enabled
IGMP = Disabled
QoS (Quality of Service) = Disabled
MTU = Auto or 1492