Thread: How to configure LINKSYS WAG200G with BSNL Dataone

Hi ,

I recently bought LINKSYS WAG200G , Currently i am using it like hub to connect systems.Instead of using it as a hub i want to replace it for my Dataone Modem itself.,lease guide me to configure it for Dataone.

Unless WAG200G has a built in ADSL modem, you cannot do that. Please check this out.

hi,

1. Press the Reset button in the modem LINKSYS WAG200G for 15 sec. Also you can reset using the gateway console using the web browser(http:\\198.168.0.1\ not sure about the ip check it's printed in the modem itself).

2. Put the modem configuration CD comes bundled with the modem the system
3. The installation wizad will ask to connect all the cables step by step.
4. Once ur modem is visible in the network, the gateway will be the dected by the installation wizard
5. it will ask for conntry and the provider then wizard will select the default settings for BSNL(barathi, tata etc.) for pppoe mode
6. Once u give the user name and pass. you have done.

Thanks Raju.I tried as u said but not able to connect with internet.

What would be the username?!

is it is dataone username : xxxx or xxxx.@dataone.com or portal user id?

please help.

old user?? for me username@dataone works

Originally Posted by rajkumar

hi,

1. Press the Reset button in the modem LINKSYS WAG200G for 15 sec. Also you can reset using the gateway console using the web browser(http:\\198.168.0.1\ not sure about the ip check it's printed in the modem itself).

2. Put the modem configuration CD comes bundled with the modem the system
3. The installation wizad will ask to connect all the cables step by step.
4. Once ur modem is visible in the network, the gateway will be the dected by the installation wizard
5. it will ask for conntry and the provider then wizard will select the default settings for BSNL(barathi, tata etc.) for pppoe mode
6. Once u give the user name and pass. you have done.

Thanks Raju , after upgrading the firmware i again tried the above steps and got connect and it is working fine now