Thread: Configure DataOne with Dlink DSL-2640T

there everyone,
I recently purchased the Dlink DSL-2640T ADSL 2 Modem, Wireless b/g Router. But unable to set it up on my computer. However, UT300R2U modem router works fine. Please help . I need to connect my laptop and mobile phone using wireless connectivity to net. Some of the posts listing automated connection of UT300R2U didn't help. Thanks

first of all go to connection settings & see if any connection has VPI/VCI values 0 & 35 respectively.if not create one such connection.select connection type as pppoe,encapsulation--LLC,make this connection as default route.enter your bsnl username & password(without @bsnl.in i think) & enable DNS.set it to automatic but if you have to enter use these servers(open dns)---208.67.222.222 and 208.67.220.220.also enable DHCP.first connect to bsnl & then you may want to ask about port forwarding.

thanks whitestar-999. It worked like wonders. I believe that the DNS parameter was only missing link to the nirvana. Anyway my iPhone and laptop are able to connect through wi-fi. Thanks again. The port forwarding is still not required, so my requirements ends here.

Originally Posted by rishikeshranjan

thanks whitestar-999. It worked like wonders. I believe that the DNS parameter was only missing link to the nirvana. Anyway my iPhone and laptop are able to connect through wi-fi. Thanks again. The port forwarding is still not required, so my requirements ends here.

Hey hi ....
well that was good u could connect ur iPhone to the wireless .....
Can u let me know which firmware version are u using on ur iPhone?
And if u have used the customised app?

Originally Posted by shriniketsarkar

Hey hi ....
well that was good u could connect ur iPhone to the wireless .....
Can u let me know which firmware version are u using on ur iPhone?
And if u have used the customised app?

It is 1.1.3. No customised application. However, no security protocol has been setup in the wireless network.

be careful about your wifi network if you are not using any security(WEP etc).keep an eye on your usage as someone else can connect to your wifi.its better if you turn it on.try it & if everything works fine then keep it on.if not then post whatever problems you faced.

Originally Posted by rishikeshranjan

It is 1.1.3. No customised application. However, no security protocol has been setup in the wireless network.

ok thanks ...i run the phone on firmware 1.1.4 ........just wanted to check whether anyone has used that customize.app .......
Ya also whitestar is right definitely put some security ....and change the default password of ur modem ....

actually I am using three dataone connections all connecting through a single unlimited plan, the other two just the basic one to keep the DSL activated. Anyway hardly any house is within 500m area. I shall introduce the same once free for a day.

can u guys please tell me where one can purchase Dlink DSL 2640T Wireless Router. and the cost of the said product

Originally Posted by rishikeshranjan

actually I am using three dataone connections all connecting through a single unlimited plan, the other two just the basic one to keep the DSL activated. Anyway hardly any house is within 500m area. I shall introduce the same once free for a day.

If its unlimited connection plan then as though the security will not mean anything for the usage.But security may help u to reduce threats to ur network.