Thread: What is Type IV router

Can anybody help me and gimme details for Type 1, 2, 3 and 4 routers...
Whats difference between each of them... What i should buy for Wireless....

Originally Posted by ranjitraut

Can anybody help me and gimme details for Type 1, 2, 3 and 4 routers...
Whats difference between each of them... What i should buy for Wireless....

i think for wireless u can go for type 4 as it supports wireless and extra ports.. i think... check it in bsnl site

The difference is mentioned here: Bharat Sanchar Nigam Ltd.

See somewhere near the bottom of the page.

Thanks buddy...

in my opinion the type iv modem/router is the best value for money

Originally Posted by just4kix

The difference is mentioned here: Bharat Sanchar Nigam Ltd.

See somewhere near the bottom of the page.

Hi Buddy,
Can u help me for configuration of DLINK GLB-502T- ADSL2 + ROUTER.
Would like to connect it to switch and would like to keep it always ON.
Do not want to use dial up....
I tried your UT starcom config for UT 300 RU, but interface that i have is different from what you have put in download thread.... I do not have a wizard in the interface....

Originally Posted by player

in my opinion the type iv modem/router is the best value for money

will go for TYPE IV router.. Thankx...

Originally Posted by ranjitraut

Hi Buddy,
Can u help me for configuration of DLINK GLB-502T- ADSL2 + ROUTER.
Would like to connect it to switch and would like to keep it always ON.
Do not want to use dial up....
I tried your UT starcom config for UT 300 RU, but interface that i have is different from what you have put in download thread.... I do not have a wizard in the interface....

Without the modem guide, I will not be able to do so. But typically, you should go to the WAN settings page and set the values as follows:

VPI = 0
VCI = 35
Connection Type = PPPoE
Encapsulation = LLC
Username = <bsnl username>
Password = <bsnl pwd>
Authentication Method = Auto
MTU = AUTO or 1492 (if this does not work, try 1500
NAT = Enabled
DHCP = Enabled
Firewall = Enabled
IGMP = Disabled
QoS = Disabled

Note that some of these setting names may appear different on your interface. Please refer to your guide.

I have written guides for three routers. Please read them and using common sense and judgement apply the same principle to your router. These guides are:

1. http://www.indiabroadband.net/bsnl-b...er-wrt54g.html (Setup of ADSL Modem/Router UT-300R2U with Linksys Wireless Router WRT54G)
2. http://www.indiabroadband.net/bsnl-b...onnection.html (Solution for multiple machines connecting to same BB connection)
3. http://www.indiabroadband.net/bsnl-b...-wgr614v7.html (Setup of UT-300R2 with Netgear WGR614v7)

You may also wish to go through the following:

1. http://www.indiabroadband.net/comput...ty-primer.html
2. http://www.indiabroadband.net/bsnl-b...primer-ii.html
3. http://www.indiabroadband.net/bsnl-b...and-guide.html (The very basic Broadband Guide)
4. http://www.indiabroadband.net/bsnl-b...ing-guide.html (Torrents and Port Forwarding Guide)
5. http://www.indiabroadband.net/bsnl-b...etworking.html (A Guide to SOHO Networking)

Don't go by the name of the topics. There could be some useful information inside that you may need to know.

Originally Posted by just4kix

Without the modem guide, I will not be able to do so. But typically, you should go to the WAN settings page and set the values as follows:

VPI = 0
VCI = 35
Connection Type = PPPoE
Encapsulation = LLC
Username = <bsnl username>
Password = <bsnl pwd>
Authentication Method = Auto
MTU = AUTO or 1492 (if this does not work, try 1500
NAT = Enabled
DHCP = Enabled
Firewall = Enabled
IGMP = Disabled
QoS = Disabled

Note that some of these setting names may appear different on your interface. Please refer to your guide.

I have written guides for three routers. Please read them and using common sense and judgement apply the same principle to your router. These guides are:

1. http://www.indiabroadband.net/bsnl-b...er-wrt54g.html (Setup of ADSL Modem/Router UT-300R2U with Linksys Wireless Router WRT54G)
2. http://www.indiabroadband.net/bsnl-b...onnection.html (Solution for multiple machines connecting to same BB connection)
3. http://www.indiabroadband.net/bsnl-b...-wgr614v7.html (Setup of UT-300R2 with Netgear WGR614v7)

You may also wish to go through the following:

1. http://www.indiabroadband.net/comput...ty-primer.html
2. http://www.indiabroadband.net/bsnl-b...primer-ii.html
3. http://www.indiabroadband.net/bsnl-b...and-guide.html (The very basic Broadband Guide)
4. http://www.indiabroadband.net/bsnl-b...ing-guide.html (Torrents and Port Forwarding Guide)
5. http://www.indiabroadband.net/bsnl-b...etworking.html (A Guide to SOHO Networking)

Don't go by the name of the topics. There could be some useful information inside that you may need to know.

Thanks dude... You were a great help....
In fact you helped me to put my system up and running in a short time....
I found some useful stuff on following link
BSNL BROADBAND MAIN MENU
if anyone needs any info it can be helpful....
Looks like u r from pune too...
All the best...

Yes. I am fom Pune.

my email id is akramkhans@aol.com plz help me out in connecting multiple computers im owned wa3002 g4 starcom modem

always smiling my boy
i have your qts solution
/
'
/
/
/
//
/
/

Only Type I modem is given on rental at present.

The monthly rental for Type I, II, III and IV modems shall be as given below:



Modem Type

Particulars
Type-I
Type-II
Type-III
Type-IV

Monthly charges
Rs. 60* p.m. - for modem type 1
Rs. 90* p.m. - for modem type 2
Rs. 60* p.m. - for modem type 3
Rs. 90* p.m. - for modem type 4


* New monthly charges with effect from 01-12-2006.

http://www.indiabroadband.net/bsnl-b...onnection.html (Solution for multiple machines connecting to same BB connection)