Thread: PPPoE Setup of UT-300R2U - Manual Method (No Wizard)

This guide explains UT-300R2U setup using manual method (without wizard).

Originally Posted by just4kix

This guide explains UT-300R2U setup using manual method (without wizard).

thanks buddy...

Good job dude!!!

thanks mate, but the interface seems completely different to the version i am using any chance to update it please?

whats the customer care no of bsnl broadband please?

this is my version

Board ID: 96338L-2M-8M
Software Version: 3.08.02.UB.01.14_1357_100807
Bootloader (CFE) Version: 1.0.37-10.1
Firmware Version: UT300R2U.0011.01
Hardware Version: UT300R2U 2.2
Model Name: UT300R2U

in the diagnostics menu i get this

pppoe_0_35_1 Diagnostics

Your modem is capable of testing your DSL connection. The individual tests are listed below. If a test displays a fail status, click "Rerun Diagnostic Tests" at the bottom of this page to make sure the fail status is consistent. If the test continues to fail, click "Help" and follow the troubleshooting procedures.

Test the connection to your local network Test your ENET(1-4) Connection: PASS
Test your USB Connection: DOWN


Test the connection to your DSL service provider Test ADSL Synchronization: PASS
Test ATM OAM F5 segment ping: PASS
Test ATM OAM F5 end-to-end ping: FAIL


Test the connection to your Internet service provider Test PPP server connection: PASS
Test authentication with ISP: FAIL
Test the assigned IP address: FAIL
Ping default gateway: FAIL
Ping primary Domain Name Server: PASS

please let me know why this fail appears


this is my WAN info


WAN Info

VPI/VCI Con. ID Category Service Interface Protocol Igmp QoS State Status IP Address
0/35 1 UBR pppoe_0_35_1 ppp_0_35_1 PPPoE Disabled Disabled Enabled Authentication Failure
0/32 1 UBR br_0_32 nas_0_32 Bridge N/A Disabled Enabled Up
8/35 1 UBR br_8_35 nas_8_35 Bridge N/A Disabled Enabled Up
8/81 1 UBR br_8_81 nas_8_81 Bridge N/A Disabled Enabled Up
0/100 1 UBR br_0_100 nas_0_100 Bridge N/A Disabled Enabled Up
14/34 1 UBR br_14_34 nas_14_34 Bridge N/A Disabled Enabled Up
1/41 1 UBR br_1_41 nas_1_41 Bridge N/A Disabled Enabled Up

This is how my TCP/IP Connection looks right now

here is the complete screenshot of how the setting look when i log into 192.168.1.1

Hai! I got Dataone BB connection before 1 year. For the convenience of downloading during the night unlimited hours (2 a.m. to 8 a.m.), I want to change the bridge setting of my modem to PPPoE.

The most pitiful thing is I am unable to find the method to do this for the model of the modem what I have. So I kindly request you to guide me or atleast inform me where I can find the method tho change the setting.

Modem Manufacturer : SemIndia
Modem Model : DNA-A201BE

THANK YOU

does your modem have a WAN page? if so please post a screenshot of it

That is actually a good Guide to help others.

Would keep this post as a bookmark.

Thanks

Originally Posted by superprash2003

does your modem have a WAN page? if so please post a screenshot of it

Thank You very much. I configured my modem successfully. The WAN page is just similar to the above posted screen shot. The only think I did all these days is I kept the Authentication mode as 'AUTO' which my modem needs to be 'CHAP'.

Once again I thank you for the care you took to answer my query.

the rar file gives me error please upload once again

Hi, I am having the same problem which "saesms" posted here.My settings and router setup screen shots are also same. I can see that my LAN status is connected and am not able to open any web pages.I couldn't find any reply in this thread. Can any one help me out please??

hi saesms, have u got resolved this problem? If yes, please let me know the steps to resolve this.

Thanks in Advance!!!

can u mail me dat guide on ma id harshadgkwd@yahoo.com n 1 more quary ...i succesfully configured ma modem....but authentication mode is 'AUTO' but i want to know what is pap n chap n wat u recommend for aunthetication

one more question....i have type-1 utr300r2 modem....i want wifi network at home.......if i buy any wireless router...shud i set modem n router both in pppoe mode or modem in bridge n router in pppoe mode or vice versa ...can sm1 put light on dis....thnx in advance

Thank you just4kix

both should not be in ppoe mode.. any one can be in ppoe mode and other in bridged..

can u tell me the price of wireless routers around 2000 to 2500...& i shortlisted linksys wrt54g and netgear wrg614...can u plz tell me the current price of both wifi routers....thnx in advance

mine dsl page r somewht different i dont why,,though i m using ut-300r2 modemm only...
chk these.....

Free Image Hosting by ImageBam.com

Originally Posted by viper_in_blood

mine dsl page r somewht different i dont why,,though i m using ut-300r2 modemm only...
chk these.....

Free Image Hosting by ImageBam.com

@viper,

Please refer to this guide: UT300-R2U Ver 2.2 - Guide for setting up

thnks a lot.......man u saved my day.....

Originally Posted by viper_in_blood

thnks a lot.......man u saved my day.....

Good. The first place people should visit for problmes and issues is the Broadband How to section. I have said so in the announcement