Thread: Unable to work wireless Nokia Siemens Networks SL2_141

hi Tech geeks up here,
please sort me out
i've got compaq presario v3225au with vista home basic
and got broadband from bsnl
the modem works with cable and
i tried all guides in windows help but there's no device found when searched as wireless device,
the modem has power,dsl,internet,wlan light lit
please help me,its very urgent
cos the phone is in drawing room and my room is 3rd to that,i need the wireless to work

which utility are you using for wireless i mean the software.....use intel pro wireless utility and turn off the windows one.(google it, its free)

If this doesnt solve your problem try restarting your router......

Man your router should be detected!!! try restarting your OS and then see with the help of the utility which i mentioned

Originally Posted by player

which utility are you using for wireless i mean the software.....use intel pro wireless utility and turn off the windows one.(google it, its free)

If this doesnt solve your problem try restarting your router......

Man your router should be detected!!! try restarting your OS and then see with the help of the utility which i mentioned

i'm using the one that came with my laptop setup(applications)
hope it works,i'll get it now

well it shows
nonIntelErr
my laptop runs AMD,is thats the case?

it doesnt matter which processor are you using ..........wait.......who is the manufacturer of your wi-fi device....if it is other than intel then this utility wont work

Originally Posted by player

it doesnt matter which processor are you using ..........wait.......who is the manufacturer of your wi-fi device....if it is other than intel then this utility wont work

nvidia

WHAT?????? nvidia are you sure thiis the manufacturer of your wi-fi device....as i doubt this .......whats the model no. of your laptop and which brand

compaq presario v3000 series
model no v3225au

its broadcom 802.11b/g LAN
is that what u wanted to know
i'm kinda noob,please ignore my noobity

its showing NVIDIA nFORCE Networking Controller aswell under Network Adapters in Devide Manager???
note:i'm connected to broadband using that dsl cable

hmm ..........install the utility which i mentioned earlier dont use the option "let windows configure my wireless connection"

boss that doesnt install properly
says nonIntelErr
then a page pops up saying this was not expected as configuration,
please contact from where u brought this product

ok

Doesn't Compaq have a download and support website from where you can download your necessary software...........if it is then at there install the application for wi-fi device

my laptop came with a folder on d:/
setup_sw
which contains all the softwares
WLAN,etc,i've installed all of them

so you are using any application for controlling your wireless or through windows itself...............which mode you are using for your modem i.e. bridge mode or pppoe mode

Is your wireless enabled or not from the modem........ENSURE THIS!!!!

i'm using broadcom802.11 as i said(it came for my laptop)
and as i said there's no wireless device recognised(i.e,modem)
so there's where my problem goes

First tell me if wireless option is enabled in your modem or not!

Originally Posted by player

damn i had that disabled and the hell i reset the settings there after making an error,
now i'm not able to connect via cable or wireless
i made some setting error there,
would u please guide me on setting up,please
dont wanna mess up my sunday,so please
the broadband manual is not helping me either,

go to your LAN TCP/IP settings & enter IP address as 192.168.1.3 & subnet mask 255.255.255.0.after that login to your modem home page by typing 192.168.1.1 in browser.go to WAN/internet connection settings & edit the connection named something like 0_35_(which means VPI & VCI values are 0 & 35 respectively).set connection type as pppoe,encapsulation--LLC,default route enabled.when asked enter your bsnl username/password without @dataone.in & set DNS as automatic.after that apply the changes.restart the modem & click on connect below the 0_35_connection if it is showing a connect link.enable DHCP server in modem LAN/DHCP settings too.also don't forget to set the security by enabling WPA & entering a key which will be required to be entered before anyone can connect to your wifi.

I am posting screenshots here so that there will be no confusion

continued

I think now you will be able to do it

thanx u guys i followed the steps of last 4 post
but its still not working
i'm too noob i think for all this stuffs,
please favour me,and get me out of it,
else i've to call techie from bsnl,and i know they will take 5-7 days to response,they are born idiots..
i've attached the latest result what i see

i tried both ways putting my username & pass & then without it just as in step 4 attachment
i'm too noob i know,please help me