India Broadband Forum

bajaj151

Presently,I am on 750UL bsnl plan.

As,it is unlimited, so I want to know, is it possible to connect to net without dialing i.e I just want to switch ON my modem...thats it...don't want to specify user name and password each time.

Modem:ZXDSL 831AII

player

First of all delete the dialer from which you are dialing presently and configure your modem to pppoe mode thats it you just have to specify your username and
password in the modem itself and the modem will dial automatically for you as soon as any pc or laptop is connected to it.

bajaj151

How to configure modem to pppoe mode ?

player

Thats a good question......

First open your routers config page and type 192.168.1.1 and press enter

enter username and password as admin and admin respectively

now go to WAN and edit the first connection named 0/35 ...bridge_0_35 something similar to this......usually it is the first connection

then in their follow the onscreen instructions and select there ppp over ethernet(PPPoE)

and enter your username password of your broadband connection(not the portal id one) there in the next step

save/reboot your router

i am using a different router otherwise i had supplied you some images

bajaj151

Under bridge_0_35..there is no option available to select ppp over pppoe

Options available there are:

Please enter VPI and VCI numbers for the Internet connection which is provided by your ISP

VPI
VCI
Service Category
-
-
-


What should I do now ?..Should I call Customer Care ?

whitestar_999

edit the connection or go to its properties/preferences.start clicking next-2 without changing any values(if you have to enter VPI/VCI values they are 0 & 35 respectively)then you will see an option encapsulation mode/connection protocol which should be bridged.change it to pppoe.

bajaj151

I found pppoe but there is a option to select

Encapsulation type:
LLC/SNAP
VC MUX

Which one I have to choose ?

I tried through LLC/SNAP (Default)
Then,Click Next,after that
New page (options) ask for IP DNS n all....but I selected obtain IP automatically.
After that,Modem Restarted,but not able to connect to network (No Net)



Is there any specific IP and dns which I must enter ?

whitestar_999

where ever you found pppoe after selecting that in the next screen you will be asked to enter your BSNL username(without @bsnl.in) & password.if you did not get such a screen then you are doing something wrong.

this is correct.
this is also correct.
try to see if you can set DNS to automatic too.

bajaj151

Final Window,before applying changes.Is this right ?

Internet(WAN) Configuration:
VPI / VCI 0 / 35
Service Category UBR Without PCR
Connection Type PPPoE LLC/SNAP, Always On
PPPOE AC Not Configured
PPPOE Service Name BSNL Broadband
NAT Off
WAN IP Address Automatically Assigned
Default Route Off

whitestar_999

you entered your BSNL username/password in some window before this screen?
enable the default route.without it this won't work.

bajaj151

I checked "Add Default Route"...still not working.

whitestar_999

post the screen shots of your modem configuration here with all the steps you took to configure connection.

skap

why switched off NAT? It is required for PPPOE mode.

meghx33

Hey balaji151 just do the following :

just start your pc and turn on your modem "zxdsl 831 aii"

then open up your browser and navigate to 192.168.1.1 then

log into your modem by providing the username & password.

click on internet under configuration


then find the ppppoe_0_35 and click on the edit button


then click on next 3 time


then click on always on and click on next ( SEE THE ATTACHED IMAGE )


then simply click on apply


now you have to restart your modem to take effect

for this do not turn off your modems switch just

go into SYSTEM> then click on RESET & RESTART

just press restart button DONT CHECK THE

"RESET TO FACTORY DEFULT SETTINGS".

now whenever you will start your modem it will automatic

connects the internet without dialing .

Attached Images

BSNL ZXDSL 831 aii 6.JPG (40.2 KB, 7 views)

tabin1

Thankyou all for the info

This topic is very nice

IS there any way by which the yellow light will not take sooo long to glow contineously.

How much time it takes in your connection.

When I connect it through seperator it takes time.

When I connet it without seperator it takes very less time.

Do you also face the same problem???

Please help

meghx33

yes i am also facing the same problem but when it connect (yellow light stops blinking) i got the net for at least 4 - 5 hours without disconnect after that it disconnects for some time, i guess for 5 - 15 min and again it connect the net.