India Broadband Forum

desktop07 · 05-31-08, 12:21 AM

Hello friends,

I have taken a new connection and i am facing some problems with configuring it. I have been given the Nokia Siemens Networks modem model-C2110. When i am trying to connect using the new connection feature of win xp, its giving me the error 678. But at the same time if i go to the modem comfiguration using 192.168.1.1 and then go to the Configuration options and then to the Internet connection Options, i can connect from there. But I am not able to use the win xp feature. Please Help.

Thanks

skap · 05-31-08, 09:40 AM

see whether this website helps you for that error You may receive Error 678 or Error 769 when you try to connect to the Internet or when you try to browse the Internet after you install Windows XP Service Pack 2.

superprash2003 · 05-31-08, 10:30 AM

ensure that you have set vpi/vci 0/35 to bridged mode while connecting via dialer

whitestar_999 · 05-31-08, 12:01 PM

i think i know the reason.new nokia siemens by default comes configured in pppoe mode & you can not configure this modem in bridge mode by normal method of changing the connection type from pppoe to bridge.in the modem configuration click connect once under the active connection(pppoe_0_35_) under configuration---internet connections.after it got connected you should not have to click connect again.

desktop07 · 05-31-08, 10:24 PM

Thank you my friends for getting back. I am able to surf the net and work on, but just wanted to know if the the connection through the modem is ok or is it good to be connected through xp. as in With this i dont have to enter my username and password stuff.i just turn on my system and the modem and it is connected........

superprash2003 · 05-31-08, 11:34 PM

you can leave it like that if you are comforatable with that setup

bimal · 09-01-09, 10:06 AM

how to configuar nokia siemens adsl modem in

superprash2003 · 09-01-09, 09:25 PM

in bsnl you mean?

essbebe · 09-01-09, 11:53 PM

C2110 dataone modam configuration(BSNL Broadband): C2110 CPE Configuration
in Dialer mode.
C2110 (Type-A) ADSL MODEM MULTIUSER CONFIGURATION in "Always On " mode.
For BSNL vpi vci 0 and 35
If any problem go through the posts in this thread.
Feedback.

05-31-08, 12:21 AM	#1
desktop07 Junior Member Join Date: May 2008 Location: Kolkata Age: 30 Posts: 27 Rep Power: 2	Need Urgent Help with Configuring Nokia Siemens C2110 Modem. Hello friends, I have taken a new connection and i am facing some problems with configuring it. I have been given the Nokia Siemens Networks modem model-C2110. When i am trying to connect using the new connection feature of win xp, its giving me the error 678. But at the same time if i go to the modem comfiguration using 192.168.1.1 and then go to the Configuration options and then to the Internet connection Options, i can connect from there. But I am not able to use the win xp feature. Please Help. Thanks

09-01-09, 10:06 AM	#7
bimal Junior Member Join Date: Aug 2009 Age: 20 Posts: 2 Rep Power: 0	how to configuar nokia siemens adsl modem in how to configuar nokia siemens adsl modem in

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SIEMENS C2110 modem does not connect to Internet	VaibhavK	BSNL broadband	9	12-05-08 10:41 PM
how to forward port for utorrent in nokia siemens c2100 modem	neoextreme	BSNL broadband	14	07-03-08 01:34 AM
General solution to siemens C2110 adsl modem	donnie_b2008	BSNL broadband	2	05-01-08 09:39 AM
nokia siemens c2110(not siemens c2110) bridge mode	whitestar_999	BSNL broadband	0	04-24-08 07:09 PM
Configuring Siemens C2110 Adsl Modem	dipsdhn	BSNL broadband	3	03-03-08 07:42 PM

05-31-08, 09:40 AM	#2
skap Gold Member Join Date: May 2008 Location: India Posts: 531 Rep Power: 2	see whether this website helps you for that error You may receive Error 678 or Error 769 when you try to connect to the Internet or when you try to browse the Internet after you install Windows XP Service Pack 2.

05-31-08, 10:30 AM	#3
superprash2003 Platinum Member Join Date: Feb 2008 Posts: 2,692 Rep Power: 5	ensure that you have set vpi/vci 0/35 to bridged mode while connecting via dialer

05-31-08, 12:01 PM	#4
whitestar_999 Platinum Member Join Date: Jan 2008 Location: UP(west) Posts: 1,971 Blog Entries: 1 Rep Power: 3	i think i know the reason.new nokia siemens by default comes configured in pppoe mode & you can not configure this modem in bridge mode by normal method of changing the connection type from pppoe to bridge.in the modem configuration click connect once under the active connection(pppoe_0_35_) under configuration---internet connections.after it got connected you should not have to click connect again.

05-31-08, 10:24 PM	#5
desktop07 Junior Member Join Date: May 2008 Location: Kolkata Age: 30 Posts: 27 Rep Power: 2	Thank you my friends for getting back. I am able to surf the net and work on, but just wanted to know if the the connection through the modem is ok or is it good to be connected through xp. as in With this i dont have to enter my username and password stuff.i just turn on my system and the modem and it is connected........

05-31-08, 11:34 PM	#6
superprash2003 Platinum Member Join Date: Feb 2008 Posts: 2,692 Rep Power: 5	you can leave it like that if you are comforatable with that setup

09-01-09, 09:25 PM	#8
superprash2003 Platinum Member Join Date: Feb 2008 Posts: 2,692 Rep Power: 5	in bsnl you mean?

09-01-09, 11:53 PM	#9
essbebe Platinum Member Join Date: Aug 2007 Location: Chennai Posts: 4,232 Rep Power: 12	C2110 dataone modam configuration(BSNL Broadband): C2110 CPE Configuration in Dialer mode. C2110 (Type-A) ADSL MODEM MULTIUSER CONFIGURATION in "Always On " mode. For BSNL vpi vci 0 and 35 If any problem go through the posts in this thread. Feedback.

India Broadband Forum

Need Urgent Help with Configuring Nokia Siemens C2110 Modem.

Need Urgent Help with Configuring Nokia Siemens C2110 Modem.

Similar Threads