Thread: Help me IN port Forwarding in Utorent with router UT300R2u

Help me IN port Forwarding in Utorent with router UT300R2u i dont know i m not getting green signal and upload speeed is 0.1 kbs please help me config i m newbie help me please

port forwarding option is not available in ut300r2u.use DMZ option in NAT setting.enter your computer's internal IP address(192.168.1.x)in DMZ & all ports will be forwarded to your computer.make sure that you fix this IP which you use in DMZ by entering this IP in computer LAN TCP/IP properties instead of obtaining IP automatically.also install a good anti virus & firewall because in DMZ your computer is directly connected to net & thus faces a lot of virus/hack attacks.

Originally Posted by whitestar_999

port forwarding option is not available in ut300r2u.use DMZ option in NAT setting.enter your computer's internal IP address(192.168.1.x)in DMZ & all ports will be forwarded to your computer.make sure that you fix this IP which you use in DMZ by entering this IP in computer LAN TCP/IP properties instead of obtaining IP automatically.also install a good anti virus & firewall because in DMZ your computer is directly connected to net & thus faces a lot of virus/hack attacks.

right now i use ip automatically can u tell how to setup manually in details as i newbie

just go to LAN TCP/IP properties & in the screen where automatic IP address is selected below that select"use following IP address" & enter IP & subnet mask 255.255.255.0.

Originally Posted by whitestar_999

just go to LAN TCP/IP properties & in the screen where automatic IP address is selected below that select"use following IP address" & enter IP & subnet mask 255.255.255.0.

whay i write in ip and degault gateway

IP--->what you enter in NAT-DMZ in modem
default gateway---->192.168.1.1

Originally Posted by whitestar_999

IP--->what you enter in NAT-DMZ in modem
default gateway---->192.168.1.1

so i can enter any ip in Dmz and same in tcp ok and default gateway is 192.168.1.1

thanks for ur help i m trying

i have tried but still getting 0.1 kbs speed with utorrent what port no should i write in utorrent and and chek the status bar turns green plese help guys i have to upload files

once you have NAT-DMZ you can enter any port no, remember to ensure that you have opened the same port in windows firewall.. in utorrent go to preferences and check which port it is listening to.. then type in the same port here Online Port Scanner | Port Scan | Port Scanning | Portscan Tool to see if that port is open successfully!!

Originally Posted by superprash2003

once you have NAT-DMZ you can enter any port no, remember to ensure that you have opened the same port in windows firewall.. in utorrent go to preferences and check which port it is listening to.. then type in the same port here Online Port Scanner | Port Scan | Port Scanning | Portscan Tool to see if that port is open successfully!!

its not repsoding any port and my firewall is off so what i do next

in utorrent options run speed test & click on"check if port is forwarded correctly".

As you stated earlier, your modem/router's IP address is 192.168.1.1.

Step 1:
Just as whitestar suggested earlier, please assign a static IP address to your machine (PC or laptop):

IP Address = 192.168.1.10
Subnet Mask = 255.255.255.0
Default Gateway = 192.168.1.1

Step 2:
- Go back to you modem's web interface (http://192.168.1.1).
- Go to the NAT-DMZ option page and enable it. It will ask you IP address of the machine to be part of the DMZ.
- Enter IP Address as '192.168.1.10'

Step 3:
- Start uTorrent
- Check that the port is forwarded correctly.
- Use the latest version of uTorrent that will automatically be allowed as an exclusion from Windows Firewall. Your Windows Firewall will then not affect uTorrent.

no!check modem manual on CD.try admin/admin as it is default for most bsnl modems.if still no success post the exact model no. here.

This is a screenshot ....where do i find the NAT/DMZ option ?

try advanced setup.

Device Info
Summary
WAN
Statistics
LAN
WAN
ATM
ADSL
ARP
Advanced Setup
WAN
LAN
Security
MAC Filtering
Routing
Default Gateway
Static Route
DSL
Diagnostics
Management

hope this helps Prashanth Speaks-Technology and Life: Port Forwarding In UT300R2U ADSL MODEM

I do not have a "nat and a dmz tab" in the router menu....

do you see a virtual server?

does port forwardin make big difference on utorrent speed?

if you are on a 2Mbps plan like home 250 or home 500 yes it does make a huge difference otherwise you will get only 30-40KB/s but if you are on an unlimited plan no such difference as your maximum speed is 32KB/s so you will get 20-30 KB/s which are satisfactory

I got 10-15 kBps without the DMZ option.. (with the yellow exclamation mark in the bottom). But now after the I activated DMZ its giving me 30-40kBps.. .. When i tried another file with more no. of seeders, it gave me about 25-35kBps, without activating DMZ..It depends on the no. of seeders u have actually

Originally Posted by Tejaswy

I do not have a "nat and a dmz tab" in the router menu....

Pleased to meet u.. Cuz we r a part of the unfortunate group, whos got that wierd modem!!
There is a DMZ option.. Go to the 'Advanced..' ---> 'Nat'.. u have the DMZ option.. Type ur IP Adress which u find by Just4kix's method.. Click save.. Ur done.. If u r using Windows Firewall, i better suggest u to get a better Firewall.. Use a good antivirus like Avast(which im using)..

Originally Posted by coolramiz

its not repsoding any port and my firewall is off so what i do next

You have to do it step wise..

Step1: u have to set a static ip address..
Goto Start--> Run --> Enter 'cmd'.. a dos prompt window opens.
Type 'ipconfig/all' Press enter.. Note down ur IP address, Subnet Mask(which will generate itself), Default Gateway, and both DNS servers.. If both of ur DNS shows the same as the Defult Gateway, u should find both the (actual)DNS numbers from ur Modem page.. It will be available in the 'Device info' i.e.. the welcome Page itself..
Then Goto Control Panel-->Network Connections--> Open the Local Area Connection which is connected.. Select the 'General' Tab--> Properties--->Click Internet Protocol(TCP/IP)---> Properties---> Under General Tab, select 'Use the following IP Address' ---->> Then enter all the details u found in the DOS prompt. enter the DNS numbers u found on the Modem web page..Click Ok.. U r done.. Now u have Static IP Address..

Step2: To Set u on DMZ..
Note down the static IP Address u previously entered.. To access ur modem page, type 192.168.1.1(default) in your address bar in ur browser.. Select 'Advanced option' ---> 'NAT' .. under NAT u will Find the DMZ option asking u for the IP Address.. enter ur static IP Address there.. Click 'Save/Add'..
Thats it.. u r done.. Now ur IP address is on all the ports..

I once again suggest u to use ur Firewall.. Under exceptions tab in Windows Firewall, keep the utorrent selected.. No need to add extra ports.. Better use a Good Firewall like Zonealarm or Comodo.. Use a Good Anti virus.. Thats enuf to keep ur system safe..

I will repeat....Under advanced i have the following options
wan
lan
security
routing
DSL

Under routing i have the option
Routing -- Default Gateway

If Enable Automatic Assigned Default Gateway checkbox is selected, this router will accept the first received default gateway assignment from one of the PPPoA, PPPoE or MER/DHCP enabled PVC(s). If the checkbox is not selected, enter the static default gateway AND/OR a WAN interface. Click 'Save/Apply' button to save it.

NOTE: If changing the Automatic Assigned Default Gateway from unselected to selected, You must reboot the router to get the automatic assigned default gateway.
Enable Automatic Assigned Default Gateway