This is a discussion on Help needed with XAVi X8821r+ modem within the BSNL broadband forums, part of the Broadband Internet Service Providers category; Dear friends, I am from Kerala. I was using Tata Indicom Broadband with the following modem in Tamil Nadu. Now ...
| |||||||
| BSNL broadband Bsnl broadband internet connection and modems, routers and other bsnl dataone related issues can be discussed here. |
| LinkBack | Thread Tools | Display Modes |
| | #1 |
| Junior Member Join Date: Jun 2008
Posts: 1
Rep Power: 0 | Dear friends, I am from Kerala. I was using Tata Indicom Broadband with the following modem in Tamil Nadu. Now I want to use this modem on BSNL broadband in Kerala. Details are given below... I need to know how to configure my computer, TCP/IP, modem and anything else to use this modem on BSNL Broadband. I am NOT exposed to computer networking but I can do it well, if I am getting good instructions ! I DON'T have BSNL broadband at the moment but will get it in a few days. I am afraid, BSNL people won't provide any technical assistance with this as I am not using their modem and I may have to install everything myself... Worries ahead ! Modem Details ------------- XAVi Technologies Corporation Model No : X8821r+ On entering IP 192.168.1.1 on my IE, I got login screen and I gave admin as both username and password. I got a page with title "GS8100 Configuration Manager UGI" which has 7 tabs as follows... Home, LAN, WAN, Bridging, Routing, Services, Admin The initial screen in on the Home tab which has the following links Home | System Mode | Quick Configuration I am now in the system view (initial page) page. Think I must go to the Quick Configuration page now. It says as follows. ---------------------------- Quick Configuration Use this page to quickly configure the system. ATM Interface : [0] (Dropdown menu with values 0 - 7) Operation Mode : [Disabled] (Dropdown menu with values Disabled, Enabled) Encapsulation : [None] (Dropdown menu with values PPPoA - VC Mux, PPPoA LCC, PPPoE VC - Mux, PPPoE LCC, 1843 Routed IP - VC Mux, 1843 Routed IP - LCC, 1843 Routed IP - LCC (1577), 1843 Bridged IP - VC Mux, 1843 Bridged IP - LCC, None) # Note : All values except the DNS fields are disabled unless I choose any of these values # for Encapsulation VPI : 0 (Textbox) VCI : 0 (Textbox) Bridge : [Disabled] (Dropdown menu. Enabled, Disabled) IGMP : [Enabled] (Dropdown menu. Enabled, Disabled) IP Address : 0.0.0.0 (four text boxes) Subnet mask : 0.0.0.0 (four text boxes) use DHCP : disable (Options available are Enable, Disable) Default Route : Disabled (Dropdown menu. Enabled, Disabled) Gateway IP address : 0.0.0.0 (four text boxes) SECTION HEADING : PPP Username : GSPN (Textbox) Password : Blank (Password field is blank) Use DNS : enable (Options available are Enable, Disable) SECTION HEADING : DNS Primary DNS server : 0.0.0.0 (four text boxes) Secondary DNS Server : 0.0.0.0 (four text boxes) Buttons : SUBMIT, DELETE, CANCEL, HELP ------------------------- I have manually configured TCP/IP setting of the Local Area Connection of my computer as follows. Use the following IP address IP Address : 192.168.1.2 Subnet mask : 255.255.255.0 Default gateway : 192.168.1.1 Use the following DNS server addresses Preferred DNS server : Blank (I don't know what to fill) alternate DNS server : Blank (I don't know what to fill) ipconfig /all command produced the following results. ------------------ Windows IP Configuration Host Name . . . . . . . . . . . . : shivam Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VIA Compatable Fast Ethernet Adapter Physical Address. . . . . . . . . : 00-12-E3-55-12-A7 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.1.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 ------------------ # NOTE : I modified the original Physical Address for security purpose. Later I tired modifying the TCP/IP setting of Local Area Connection to obtain DNS servers and IP addresses automatically and tried ipconfig/all command. Then I received a somewhat different output. It is given below. ------------------ Windows IP Configuration Host Name . . . . . . . . . . . . : shivam Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VIA Compatable Fast Ethernet Adapter Physical Address. . . . . . . . . : 00-12-E3-55-12-A7 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 Lease Obtained. . . . . . . . . . : Monday, June 30, 2008 3 31 PM Lease Expires . . . . . . . . . . : Wednesday, July 30, 2008 3 31 PM----------------------- # NOTE : I modified the original Physical Address for security purpose. Now, with these information, can you help me to configure my XAVi X8821r+ modem to use on BSNL Broadband at Pathanamthitta District of Kerala State, South India? The detailed settings on the modem configuration page (http://192.168.1.1/) is too confusing for me. Please be descriptive, if possible. Thanks a lot for your valuable time. Regards, Vineeth Mohan Vineeth Live ! Welcome to My Personal Website and Blog vineethmohan@gmail.com |
| | |
| | #2 |
| Platinum Member Join Date: Feb 2008
Posts: 2,692
Rep Power: 5 | ok.. in your vpi/vci page.. create a new vpi/vci set the vpi value to 0 and the vci value to 35 .. then set this vpi/vci to pppoe mode. and enter your bsnl userid and password there.. save/reboot your modem and you should be good to go!! |
| | |
| | #3 |
| Junior Member Join Date: Jul 2008 Age: 26
Posts: 1
Rep Power: 0 | my modem has to be configured every time whan i plug in so help to save the settings |
| | |
| | #4 |
| Platinum Member Join Date: Feb 2008
Posts: 2,692
Rep Power: 5 | please mention your modem model no.are you connected via usb? |
| | |
| | #5 |
| Junior Member Join Date: Aug 2008
Posts: 7
Rep Power: 2 | Hai! I got Dataone BB connection before 1 year. For the convenience of downloading during the night unlimited hours (2 a.m. to 8 a.m.), I want to change the bridge setting of my modem to PPPoE. The most pitiful thing is I am unable to find the method to do this for the model of the modem what I have. So I kindly request you to guide me or atleast inform me where I can find the method tho change the setting. Modem Manufacturer : SemIndia Modem Model : DNA-A201BE THANK YOU |
| | |
| | #6 |
| Junior Member Join Date: Aug 2008 Age: 28
Posts: 4
Rep Power: 0 | Hi, I have laptop(windows Vista) and trying to connect router XAVI X8821r. Laptop say limited connectivity,not able to open modem comfiguration page in explorer . I think it drivers problem.Can anybody please guide from where I can get drivers. Thanks in Advance Bhushan Last edited by bhushandeshmukh; 08-14-08 at 03:41 PM. |
| | |
| | #8 | |
| Junior Member Join Date: Dec 2008 Age: 21
Posts: 1
Rep Power: 0 | Quote:
but it don't even work......... i'm not gettin what the prob is exactly..... wan light doesn't get stable (blinks in normal way n sometyms faster than normal)....... please suggest me with complete settings.... | |
| | |
| | #9 |
| Platinum Member Join Date: Aug 2007 Location: Chennai
Posts: 4,240
Rep Power: 12 | Modem XAVI X8821r 1.Did you see Post No 1 ? 2...How do you want to connect ? 3.....Always On ( PPP PPPoE) or Dialer Mode ( "Bridged") 4......Post ipconfig/all data .........START RUN type cmd type ipconfig/all REF: settings for a XAVI modem. http://new.gorge.net/?q=forums&c=sho...d&ThreadID=102 |
| | |
| | #10 |
| Platinum Member Join Date: Aug 2007 Location: Chennai
Posts: 4,240
Rep Power: 12 | see annexure for dialup settings For PPPoE "Always On " please refer link given above. . |
| | |
| | #11 |
| Platinum Member Join Date: Feb 2008
Posts: 2,692
Rep Power: 5 | are you able to access your modem via http? |
| | |
| | #12 |
| Junior Member Join Date: Sep 2007
Posts: 5
Rep Power: 3 | @vineethmohan Did you solve the problem you were facing with X8821r regarding configuring it everytime you reboot I'm having the same problem...........can you help me out if you have solved it. |
| | |
| | #13 |
| Platinum Member Join Date: Aug 2007 Location: Chennai
Posts: 4,240
Rep Power: 12 | Last edited by essbebe; 03-01-09 at 11:22 AM. |
| | |
| | #14 |
| Junior Member Join Date: Sep 2007
Posts: 5
Rep Power: 3 | @essbebe Thanks for your response but could not solve my problem. I'm able to configure X8821r for my BSNL and am able to connect sucessfully but when reboot my PC I'm not able to connect again,all the modem settings are same but I dont get the point why I;m not able to connect. I'll have to restore my modem to default factory settings and then again configure it with BSNL settings and use the Broadband and again when I reboot I'll have to do all this stuff all over again to use my BB conncetion. Can you tell me how to stablise my modem with BSNL settings so that I can connect to Internet without any problem even after rebooting my PC |
| | |
| | #15 | |
| Platinum Member Join Date: Aug 2007 Location: Chennai
Posts: 4,240
Rep Power: 12 | Quote:
or try one by one! confirm : Using "Bridged" dialer mode or PPP/PPPoE "always on" mode. confirm you have downloaded the manual. There are too many options. | |
| | |
| | #16 |
| Junior Member Join Date: Sep 2007
Posts: 5
Rep Power: 3 | I'm using bridge mode I understand the rebook options and I have always checked it before I reboot after configuring Yes I have downloaded the manual and followed it but it has no solution for this problem. the problem is When I reboot.........the config and the settings do not change (they stay as they are best config for BSNL) but I dont know why despite having the right config I'm not able to conect after reboot. Will try all the other reboot options.................... Do let me know if u find any solution...... Last edited by praveen5344; 03-02-09 at 12:58 AM. Reason: Automerged Doublepost |
| | |
| | #17 | |
| Platinum Member Join Date: Aug 2007 Location: Chennai
Posts: 4,240
Rep Power: 12 | Extract from earlier post No 10. I don't use/have this modem. Quote:
| |
| | |
| Tags |
| modem, needed, x8821r, xavi |
| Thread Tools | |
| Display Modes | |
| |
| ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Using XAVi modem with DataOne | Spawn Freak | Tata Indicom broadband | 14 | 10-16-09 05:04 PM |
| MTNL connection problem, MTNL balmes on private modem!!! | sankirsh | MTNL broadband | 18 | 05-24-09 08:05 AM |
| 54 Mbps Wireless DSL Modem | Admin | News from the Tech and IT World | 0 | 05-23-08 08:20 AM |
| Help Needed on Modem Types | aruncse30 | BSNL broadband | 12 | 01-30-08 01:27 PM |
| UT300R2U modem driver needed | tsanthosh | BSNL broadband | 1 | 12-19-07 12:09 PM |