Thread: Port Forwarding Image Tutorial For Utorrent [Part 1]

Originally Posted by Admin

Your firewall is blocking the images... they are there

Oh...ok....Will go home & check....Thank you Admin.....

wil it help to increase speed

Well My ISP has provided me A TP-link router.
My Router Page Donot have NAT Option.
so how to do portforwarding in this case.
secondly they provided me a an IP address.
but when i try to dwn load any file frm rapid or megaupload
it says ur IP address is currently dwnloading a file. wait till
it complete. however I m not dwnloading any thing.
The IP which is shown is not mine which is provided to me.
Can any one help me out with this issue

please mention your ISP.. do you use a dialer to connect?? if so you mostly dont need to port forward..please post a screenshot of the modem settings page.. looks for "virtual server" or "nat-dmz"

Hey players_player awesome help..

but i have one issue.. we are 4 ppl in the office.. and only one person is able to put his/her ip on the DMZ screen.. and utorrent fails to port forward for the other ips.. what should we do?

we have a utstarcom modem. 2mbps line..

thanks

rakesh

then you either need to get a router which supports Virtual server or connect it to a server which forwards required ports to required clients.. getting a router with virtual server option would be cheaper..

sir mine is ITI LIMITED MODEL NONA-A211-I
AS I FOLLOWED UR TUTORIAL I WAS not ABLE TO PORTFORWARD
DOUBT, WHEN U CHECk , THROUGH cmd/ipconfig-iam getting ip as 192.168.1.2
i did enter it NAT -- DMZ Host saved and rebooted it now when i look at the Device Info of the router it shows LAN IP Address: 192.168.1.1 why this differernt , iwas not able to prt forward like this i did change firewall i did assign the port no too plz help

192.168.1.1 is the modem/router ip address.You have to enter 192.168.1.2 in the nat-dmz page.. which i think you did.. now disable windows firewall for 1 or 2 min..and then use this port scanner to scan to see if the port you wanted is open. . Online Port Scanner | Port Scan | Port Scanning | Portscan Tool .. if it shows open then you have to configure your firewall properly..

Model no dna-a211-i sir do u ha ve any specific tutorial for this router.
One doubt is my ip is set to obtain automatically
should i configure it use the following ip and enter detail from the ip I GOT FROM CMD\IPconfig to get a static ip
thank uuuuuuuuuuuu very much any way

wow.. this is a pretty good router.. it has nat dmz as well as virtual server.. in that case use virtual server.. dont use nat.. remove the ip addresss in the nat-dmz column.. this tutorial should help you Port Forwarding for the ITI DNA-A211-1

please help i want to configure port forwarding for siemens c2110

go to http://192.168.1.1 . enter username and password as admin.. you should see either a virtual server option or nat-dmz.. if virtual server is seen then that is preferred else you have to use nat-dmz
1) if you see virtual server do this Prashanth Speaks-Technology and Life: Portforwarding through Virtual Server in huawei SmartAX,netgear and dlink routers
2) if you see nat-dmz Prashanth Speaks-Technology and Life: Port Forwarding In UT300R2U ADSL MODEM

A small difference of opinion here. Everyone knows that opening up DMZ is a last option(atleast in ut300r2u new modem) and it opens all the port of the system rather than how the virtual server works. So user has configured windows firewall to add exception for that port alone and block all other ports to be safe. But when tested it in my machine i.e try port forwarding for other ports too with the exception added for the specific port, it indeed allowed all the ports to be connected rather than blocking all the ports except the mentioned port. I'm saying this here because when i opened up DMZ for the first time multiple spyware and trojan attacks was blcoked by my eset anti spyware and antivirus. I also tried setting up the port exception in Windows firewall as like said here but as i said it didnt work as mentioned and it indeed opened all ports for me making me to go back to bridge mode again. I am not sure whether it(port exception) happens only for me or others too. Check for other ports too(just replace random port number in the url used to test the portforwarding) to be safe.

Is it still applicable for those ip address is dynamic/changing?

I think Iremeber setting my ip address setting in automatic mode.
(BSNL dataone consumer...)

yes you would need static internal ip..

Originally Posted by johnycage

Is it still applicable for those ip address is dynamic/changing?

I think Iremeber setting my ip address setting in automatic mode.
(BSNL dataone consumer...)

ah! now I got it... he's talking about my machine's ip which is 192.168.1.x most of the cases...
& not the dynamic ip over the internet..which starts with 117....
gotcha

is it for static IP???

i was able to portforward thank uuuuuuuuuu

Originally Posted by players_player

Step 2 is when it asks u for username and password and if ur username is admin, and password is admin, then type accordingly...

next when u enter the page select Advanced Setup.

Under Advanced Setup, select NAT, Under NAT, select DMZ Host

In DMZ Host Type Ur IP Address and click "save/apply"




Once u have clicked save/apply then click on Management

Under Management Click on Save/Reboot

Follow The Image Below




And Now All Ur Ports Are Forwarded... But Thats Not The End!


ClICK ON PART 2...

Kindly explain this part with reference to modem MT 841. I am using it.
I am unable to port forward utorrent..

Originally Posted by jee.ramesh1983

Kindly explain this part with reference to modem MT 841. I am using it.
I am unable to port forward utorrent..

Huawei Smartax MT- 841 Right ? here you go.Port Forwarding for the Huawei Smartax MT 841

Originally Posted by Archer

Huawei Smartax MT- 841 Right ? here you go.Port Forwarding for the Huawei Smartax MT 841

I tried.. but still getting error..

Originally Posted by jee.ramesh1983

I tried.. but still getting error..

Do you have any Firewall enabled that could block the port ?
Did you added that port in Windows firewall exceptions ?

This is my firewall exception

In the utorrent -->Preferences--> connections
Should "Add windows firewall exception" be ticked or not....

Originally Posted by jee.ramesh1983

In the utorrent -->Preferences--> connections
Should "Add windows firewall exception" be ticked or not....

You need it to be ticked. And and the port in the Windows Firewall exceptions. Like this.

Added in windows exception as u said....still error....

i just tried to download through utorrent..I am getting download speed of around 28~32 kB/sec (750 UL plan)...