India Broadband Forum

smoothvibes

no no thats not error 676
thats error 691 Username and password is invalaid on domain

BradEuk

Hey i think error 676 is something that is too common with BSNL.

But if the issue was because of Wrong username and password i think thats correct.

Good to know that Not a BSNl issue

rockak47

Ut300r2u (Type 1 dataone modem configuration to kick away 676 error)
Configure BB VPN in pppoe mode and
Internet in bridge mode.
NOTE:AS MENTIONED ABOVE FOLLOW BOTH THE PROCESS.IT MEANS THAT U HAVE TO FOLLOW ALL THE STEPS

1. Connect ADSL modem to your PC with straight Ethernet Cable (RJ45)
2. Open Internet Explorer and type :192.168.1.1 and give enter(add http before 192)
3. Type user as admin and password as admin
4. In the opened window click advanced setup
5. You will find different VPI/VCI in Wide Area Network setup window
6. Click edit button against VPI/VCI 0/32 row
7. you will get ATM PVC configuration, make VPI to “0” and VCI to “32” go to next
8. Select connection type as PPPOE and click next
9. Type your broadband username, Password {by which u r connecting to net}and Service is already written in box.Leave as it is.
10. click next.
11. No configuration in next window, simply click next
12. Click save
13. Now again click edit button against VPI/VCI 0/35 row
14. You will get ATM PVC configuration, make VPI to “0” and VCI to “35” and click next
15. Select connection type as BRIDGE and click next.
16. No configuration in next window, simply click next
17. Click save.
18. In the Wide are network setup window, click Save/Reboot.
19. Close your browser and wair hor 2 minutes.
20. Now goto start_all programs_accessories_communications_new connection wizard(click)
21. Click next 2 times.After that select “setup my connection manually” and click next
22. Now select “connect using a broadband connection that requires a username and password”.
23. Click next and type “dataone” in blank space and again click next.
24. Enter your username and password and click next.
25. Select “add a shortcut” option and click finish.
26. Goto desktop and doubleclick on dataone and dail.
27. Happy journey and best of luck and also good byeeeee to 676”phone line is busy”

pbhargava

^^^
thanks for your suggestion
works perfect (atleast for the time being)
I have a question
what exactly does that (your configuration) do

rockak47

Quote:

Originally Posted by pbhargava ^^^ thanks for your suggestion works perfect (atleast for the time being) I have a question what exactly does that (your configuration) do

DEAR FRIEND !
ACTUALLY I M A SIMPLE BROADBAND USER LIKE U.I WAS IN TROUBLE SINCE A LONG TIME AS MY MODEM IS GIVING ERROR 676 EVERYTIME.SO I SEARCHED AND FOUND THESE SETTINGS ON UTSTAR WEBSITE BUT IN A BRIEF.SO I THOUGHT TO EXPAND IT'S IDEA BETWEEN ALL OF THEM WHO ARE FACING THE SAME PROBLEM.
BUT WHAT I THINK IS THAT BY DEFAULT THE USERNAME AND PASSWORD IS SET AS MULTIPLAY ON OUR MODEM CONFIG. SITE.SO IT'S TRYING TO CONNECT WITH THAT USERNAME AND PASSWORD WHICH IS WRONG AND WE ARE STRUGGLING ON OUR DESKTOP TO CONNECT VIA OUR METHOD.SO I THINK THAT'S THE POINT.
THANKS FOR UR REPLY..

kogantisridhar

wonderful, it worked

sanjeevkathuria

SOLUTION FOR REMOVING ERROR 676:PHONE LINE BUSY

error 676 is what you will get if you try to dial connection from windows while modem is set in pppoe mode.bsnl modems now comes with a default pppoe connection with default username/password as multiplay/multiplay.

TO RECTIFY THIS PROBLEM...type 192.168.1.1 in the address bar of your internet browser and press go(or enter with keyboard).....it will ask for username n password.....type admin/admin as username/password n press ok......now a page with DATAONE at the top will come....on the left side of the screen you wil have few options.....1).device info 2). advance setup etc...click(single click) advance setup thro your mouse....on right side of your screen u will get a table.....now look for the option 0/35 (normally it is the first option in first line)....click on the edit against this option....now on the next page click "next" and on the next page u will get connection type(pppoA, pppoE.......bridging).....select bridging by single click on it.....thn click on "next" and again "next" and then "save" and then "save/reboot".......

that is it.....now ur modem will reboot itself....now wait for dsl led to get stable....now connect ur internet.....u will not get this problem ever again.....take care

rockak47

nice to hear from u that the method had worked for u and also thanks for ur reply...

"help others to get help from others"

saurabhyadav1987

*** duplicate post removed ***

Vaidya

Does BSNL bothers to care for its costumers??
i dont think....cos i called them nearly 5 times for change over to wi-fi and...676 persists even now...its since 3 days...im not able to get connected....!!

im from Chinchwad Pune Maharashtra