India Broadband Forum

harishwar

i'm dialing th connection wit user name and password ...


in advance setup in 192.168.1.1
my value Wide Area Network (WAN) Setup are:

VPI/VCI 0/35
Con. ID 1
Category UBR
Service pppoe_0_35_1
Interface pppoe_0_35_1
Protocol PPPoE
Igmp Disabled
QoS Disabled
State Disabled

robert_0007

Go to BSNL BROADBAND MAIN MENU and setup your modem according to the header using ADSL modem configuration for multiuse

harishwar

my modem is not listed there ..

shall i configure as in wa3002g1?

robert_0007

Oh I think you need exact configuration. then please go there http://www.indiabroadband.net/bsnl-b...er-wrt54g.html (Setup of ADSL Modem/Router UT-300R2U with Linksys Wireless Router WRT54G) and download the. and download the zip file posted by Just4kix. I think this will serve your purpose

harishwar

thanx !!


it is working fine after switching to bridge mode

but i cannot open 192.168.1.1

robert_0007

you are always welcome

harishwar

i got a new problem internet is working fine too browse but.. modem is showing as limited connection and my dsl router is not opening[192.168.1.1]

robert_0007

Go to control panel, open the network connections, double click the LAN, click on properties find the TCP/IP & select it, now again choose properties and then select use the following IP address. then enter you IP as 192.168.1.10, click on subnet mask, that should be 255.255.255.0 then select default gateway as 192.168.1.1. Now go to DNS, give primary DNS as 218.248.255.162 and the secondary DNS as 218.248.255.139. click on ok. then try to open 192.168.1.1

harishwar

thanx..

my my net is connecting nicely..

can you say me the diffference in PPPoE mode and Bridge Mode and which is better for connecting to a desktop pc

whitestar_999

in pppoe mode modem makes the connection to net using your bsnl username/password which is saved in modem without any need of computer so that you get connected by just turning on the modem.also you can use net simultaneously on more than 1 computer by connecting multiple computers to modem.in pppoe mode your computer is not directly connected to net but it is behind your modem & anyone on internet will see your modem only & all traffic will first pass through modem & then comes to your computer which is more secure as every modem has inbuilt firewall.

in bridge mode connection is made by you using windows after turning on the modem using your bsnl username/password in computer.you can't use net simultaneously on more than 1 computer if you connect multiple PC's to modem.in bridge mode your computer is connected directly to net & all traffic from internet comes directly to your computer so it is more risky & you have to use a good antivirus & firewall because modem won't provide any security in this mode.

__________________
"They say that if you play a microsoft disc backwards you hear satanic messages, thats nothing: if you play it forwards it installs windows"