Thread: Problem In Connecting The Internet

I use BSNL WA3002G4 modem
my net will not connect if i does not connect within few seconds after switching on the modem ... after few seconds the internet light on the modem will be glowing and doesn't connect the internet... i should restart the modem ..

can you plz help me..

What is the error you are getting? Please enter the error code.

i don't get any error.. i just don't connect

Are you using ppoe or bridge mode?

PPPoE Mode

my problem is tht after 1min of switching on the modem the light under the internet[green] will be glowing .... and cannot connect to the net

oh ok, then there may be problem with your SNR value, That is, the problem is with your Line or modem.

can you say me how to see the SNR value

type 192.168.1.1 in your browser address bar. Then press enter. Supply the user id as admin and password as admin. then find the SNR value within that page with the help of navigation. I can not say the exact location of SNR Value in your modem as I am using a different one.

i get this..

Device Info

BoardID: 96338W
Software Version: 1132_061507-3.08L.BSNL_02.
Bootloader (CFE) Version: 1.0.37-8.7
Firmware Version: WA3002G4-0021.01
Hardware Version: WA3002G4 1.0
Model Name: WA3002G4
Wireless Driver Version: 3.131.35.6.cpe2.0a.s

This information reflects the current status of your DSL connection.

Line Rate - Upstream (Kbps): 509
Line Rate - Downstream (Kbps): 2046
LAN IP Address: 192.168.1.1
MAC Address:
Default Gateway:
Primary DNS Server: 192.168.1.1
Secondary DNS Server: 192.168.1.1

Your device info is showing that you are using bridge mode, but you told that you are in pppoe mode??Now one last question. you are connecting broadband by dialing or just by switch on the modem. if you are dialing the connection then you are in bridge mode

i'm dialing th connection wit user name and password ...


in advance setup in 192.168.1.1
my value Wide Area Network (WAN) Setup are:

VPI/VCI 0/35
Con. ID 1
Category UBR
Service pppoe_0_35_1
Interface pppoe_0_35_1
Protocol PPPoE
Igmp Disabled
QoS Disabled
State Disabled

Go to BSNL BROADBAND MAIN MENU and setup your modem according to the header using ADSL modem configuration for multiuse

my modem is not listed there ..

shall i configure as in wa3002g1?

Oh I think you need exact configuration. then please go there http://www.indiabroadband.net/bsnl-b...er-wrt54g.html (Setup of ADSL Modem/Router UT-300R2U with Linksys Wireless Router WRT54G) and download the. and download the zip file posted by Just4kix. I think this will serve your purpose

thanx !!


it is working fine after switching to bridge mode

but i cannot open 192.168.1.1

you are always welcome

i got a new problem internet is working fine too browse but.. modem is showing as limited connection and my dsl router is not opening[192.168.1.1]

Go to control panel, open the network connections, double click the LAN, click on properties find the TCP/IP & select it, now again choose properties and then select use the following IP address. then enter you IP as 192.168.1.10, click on subnet mask, that should be 255.255.255.0 then select default gateway as 192.168.1.1. Now go to DNS, give primary DNS as 218.248.255.162 and the secondary DNS as 218.248.255.139. click on ok. then try to open 192.168.1.1

thanx..

my my net is connecting nicely..

can you say me the diffference in PPPoE mode and Bridge Mode and which is better for connecting to a desktop pc

in pppoe mode modem makes the connection to net using your bsnl username/password which is saved in modem without any need of computer so that you get connected by just turning on the modem.also you can use net simultaneously on more than 1 computer by connecting multiple computers to modem.in pppoe mode your computer is not directly connected to net but it is behind your modem & anyone on internet will see your modem only & all traffic will first pass through modem & then comes to your computer which is more secure as every modem has inbuilt firewall.

in bridge mode connection is made by you using windows after turning on the modem using your bsnl username/password in computer.you can't use net simultaneously on more than 1 computer if you connect multiple PC's to modem.in bridge mode your computer is connected directly to net & all traffic from internet comes directly to your computer so it is more risky & you have to use a good antivirus & firewall because modem won't provide any security in this mode.

thanx!!

thank you for your guide...