Thread: Most easiest config ever for WA3002G4 BSNL modem

Originally Posted by wwwwww717

hey can any one tell me how to block the wireless user.....coz i am using bsnl type 4 modem. and some body making most of it...
i can see his computername and mac address..can i do any thig abt it

Use a MAC filter ... its the best way to keep anyone out of your network binding only your hardware to your network...... though the network will be displayed as open no one will be able to access it. Very effective :tank::shuriken::5:

taa also not workin.........

Originally Posted by karthik_122

taa also not workin.........

Are you using vista ?????????

Originally Posted by karthik_122

taa also not workin.........

Reset ur modem to factory settings by inserting a pin in the reset hole of ur modem... that will make it 192.168.1.1

Have a look at threads in Broadband How To section...
Broadband How to

i did the reset and now its connecting..............but an another problem is comming....the internet light is coming on before i connect.....im not able to connect aftr the light has come on......befor the light comes on i can connect....but the connection fails in a minute or two........

@ karthik_122
get into ur modem by typing 192.168.1.1 in ur browser; Type username & password as admin... Take a screenshot of status page(in full screen) & post it here...

wat do u mean by status page????

I meant the default page which comes up when u log-in... Its device info page under status... denoting values like firmware version, Lan IP address, MAC address, SNR margin etc...

Originally Posted by itsmemad

I meant the default page which comes up when u log-in... Its device info page under status... denoting values like firmware version, Lan IP address, MAC address, SNR margin etc...

Device Info

BoardID: 96338W
Software Version: 1132_061507-3.08L.BSNL_02.
Bootloader (CFE) Version: 1.0.37-8.7
Firmware Version: WA3002G4-0021.01
Hardware Version: WA3002G4 1.0
Model Name: WA3002G4
Wireless Driver Version: 3.131.35.6.cpe2.0a.s

This information reflects the current status of your DSL connection.


Line Rate - Upstream (Kbps): 865
Line Rate - Downstream (Kbps): 2045
LAN IP Address: 192.168.1.1
MAC Address: 00-1b-da-2f-4f-8b
Default Gateway:
Primary DNS Server: 192.168.1.1
Secondary DNS Server: 192.168.1.1

i did tat but same as b4....

and one more ting this is wat i found on dignostics page

Test the connection to your local network Test your ENET(1-4) Connection: PASS
Test your Wireless Connection: PASS


Test the connection to your DSL service provider Test ADSL Synchronization: PASS
Test ATM OAM F5 segment ping: PASS
Test ATM OAM F5 end-to-end ping: PASS


Test the connection to your Internet service provider Test PPP server connection: FAIL
Test authentication with ISP: PASS
Test the assigned IP address: FAIL
Ping default gateway: FAIL
Ping primary Domain Name Server: PASS

Ok... do one thing... check the screenshots here... and do like its said there...
Chennai Telephones- Changing password in DataOne Pre-configured modem

no use.............

Go to command prompt type ipconfig and post results!!

when i start the modem the connection takes place automatically without my knowledge........in the connect to network window it is not displayed as connected, but as an connection option...wat do i do......

@karthik_122

Test the connection to your DSL service provider Test ADSL Synchronization: PASS
Test ATM OAM F5 segment ping: PASS
Test ATM OAM F5 end-to-end ping: PASS

Usually for BSNL last two willshow fail.
Appears you have clicked wrong mode in WAN page.
Could be PPPoA.
uncheck it and select PPP over ethernet PPPoE. item 2.
Enter userId without @bsnl.in Password
SAVE REBOOT wait for two or three minutes.
If confused select "Bridged" ( *you have to use external dialer ).
Wait . Checking screenshots of your modem/router.

See screenshot Item No 5 .
http://www.chennai.bsnl.co.in/BBS/WA3002G4.htm

@ essbebe
Good that u r here... btw, these two are same in my modem also...

Test ATM OAM F5 segment ping: PASS
Test ATM OAM F5 end-to-end ping: PASS

I guess therez no prob...

@itsmemad
http://i33.tinypic.com/21aityp.jpg
just now for BSNL not connected.
Beetel 110Bx1.
I am connected now on Airtel ISP. All pass except 1st entry.
Also programmed for BSNL .
diagnostics above now.
This modem is identical to Beetel series with wireless FW.
Para two : I said usually. ( same for me in AX MT 882 modem )
To save all confusion he can select "Bridged" !!
The link you gave was first given in this Forum by a new comer. and I have
posted in this thread.
There is also another link with user manual etc at MP bsnl site.
Thanks for your patience, and willingness to solve the problem.

U r welcome...Yeah... I noticed that u said "usually" before posting... still was confused... well, ur post explains it... and I guess u can guide him to "bridge" mode... That will be much better option to try... neway u know better... take it from here...

@itsmemad
Just switched to BSNL BB after power failure.
Beetel 110BX1 shows fail for OAMf5. ( two entries) IP 59.xx.xx.xx
Working OK.
May be different in some other modems.
Will wait for feedback . Now Lunch and sleep!

Originally Posted by karthik_122

when i start the modem the connection takes place automatically without my knowledge........in the connect to network window it is not displayed as connected, but as an connection option...wat do i do......

Karthik goto the first page on this post and follow the instructions it should solve your problem i gues.. let me knw

Originally Posted by renishkm

Karthik goto the first page on this post and follow the instructions it should solve your problem i gues.. let me knw

tanks for tat renishkm..........

Originally Posted by itsmemad

Go to command prompt type ipconfig and post results!!

tanks man..........the prob is gone now........ its wat eesebe said i jus selected bridging........

[QUOTE=essbebe;57363]@karthik_122

Usually for BSNL last two willshow fail.
Appears you have clicked wrong mode in WAN page.
Could be PPPoA.
uncheck it and select PPP over ethernet PPPoE. item 2.
Enter userId without @bsnl.in Password
SAVE REBOOT wait for two or three minutes.
If confused select "Bridged" ( *you have to use external dialer ).
Wait . Checking screenshots of your modem/router.



tank man.....the bridging is the prob......but the connection disconnects in long workings......is it normal.......

@karthik_122
Good. Just confirm about Diagnostics page OAMF5 entries. Pass or Fail ?
Please Check Diagnostics page again. and give details about these two only.
Thanks. ( will remember for this modem/router)
Better surf, for two or three days. The modem also learns the settings!
Report any further problem. ( make a note of present settings !!!)
Probaly the Dynamic IP changes, and you loose connection.
.

Originally Posted by essbebe

@karthik_122
Good. Just confirm about Diagnostics page OAMF5 entries. Pass or Fail ?
Please Check Diagnostics page again. and give details about these two only.
Thanks. ( will remember for this modem/router)
Better surf, for two or three days. The modem also learns the settings!
Report any further problem. ( make a note of present settings !!!)
Probaly the Dynamic IP changes, and you loose connection.
.

all pass......wer is tat dynamic IP??????/

whatismyipaddress.com/

Originally Posted by essbebe

whatismyipaddress.com/

got it............can u give me the step by step procedure for wireless on modem on lap....wa3002g4 modem vista home premium....i actually messed up and now ter is a cross on the wireless networ near UTstarcom,,,,,,,,