Thread: Not able to do port-forwarding in UT300R2U(pppoe mode)

Well , I have completely tired to use all tricks to do port-forwarding in pppoe
mode in my router(UT300R2U).

I have tried all these:

1)cmd->ipconfig->my ip address
2)logged-in to my router
3)advanced-nat->dmz->entered my ip address
4)save/apply

utorrent port checker gives 'Error! Port 6881 does not appear to be open'


When I do these steps:

1)Go to Lan->properties
2)Click Internet Protocol(TCP/IP) and then the Properties button
3)put IP address and subnetmast what you see in command prompt by doing
ipconfig.

when I do the above three steps , I am not able to open any pages.Then I
have to go back and change the setting back to 'obtain ip address
automatically' mode.And that way port-forwarding is not working.

I am in big dilemma,please solve my problem

best regards,
Spectre

Have a look at this guide if it helps:

Torrents and Port Fowarding Guide

If the above does not help, do the following:

a) Assign a static IP address to your PC's lan card (TCP/IP) properties. The IP address must be in the same subnet as that of the modem/router. Here is how to: How to set TCP/IP settings

b) Go to your router's configuration page and enable NAT-DMZ option for the above IP address.

Thanks , I found yours and the 'port-forwarding image tutorial' from this site
very helpful and the my problem was assassinated.

god bless my son ,I mean brother

best regards,
Spectre

Originally Posted by Spectre

god bless my son ,I mean brother

Wow! That makes me feel a lot younger!!! I am probably the oldest amongst the lot. Visit my Albums and check out...