Thread: Need help: configuring opendns in wa3002 G4

hi. guys.. i wanted to configure my router to use opendns bcos i think bsnl dns in very slow to my liking .. plz tell me :
1. if i configure the dns settings in connection properties .. would that work?? bcos i think it will still use the dns configured in router that way!!
2. how to configure dns servers in router in this particular model.. ?? i.e. Utstarcom WA 3002 G4 .. help appreciated.

I don't think its wise to mess with the default router settings. Configuring the DNS settings in the connections should work. But if you really want to do it.

1. Open the web browser
2. Enter IP of your router in the address of the browser
( default ip address is 192.168.1.1 ) and click Enter.
3. Enter your username and password on the prompt box ( default username and password is "admin" ) and click OK.
4. On the page you get now Click the Advanced Setup link near the left side of the page.
5. In the menu that you get now click DNS.
6. Untick the box which says: Enable Automatic Assigned DNS.
7. Type 208.67.222.222 in the Primary DNS server box and 208.67.220.220 in the Secondary DNS server box.
8. Click the save button and the Advanced Setup button on the left side.
9. Click the Save/Reboot button.
10. Wait for the modem to restart and your done.

Hope this helps!

^^ Thanks.

Originally Posted by vishnus89

I don't think its wise to mess with the default router settings. Configuring the DNS settings in the connections should work. But if you really want to do it.

1. Open the web browser
2. Enter IP of your router in the address of the browser
( default ip address is 192.168.1.1 ) and click Enter.
3. Enter your username and password on the prompt box ( default username and password is "admin" ) and click OK.
4. On the page you get now Click the Advanced Setup link near the left side of the page.
5. In the menu that you get now click DNS.
6. Untick the box which says: Enable Automatic Assigned DNS.
7. Type 208.67.222.222 in the Primary DNS server box and 208.67.220.220 in the Secondary DNS server box.
8. Click the save button and the Advanced Setup button on the left side.
9. Click the Save/Reboot button.
10. Wait for the modem to restart and your done.

Hope this helps!

I am using the same model. Will you please assist me in changing the dial up mode to ppoe mode.I am using to enter the username and password every time when i started the system and i think because of this i am charging with more usage.

http://www.indiabroadband.net/bsnl-b...html#post33892 (Most easiest config ever for WA3002G4 BSNL modem)