Thread: Configuration for zte zxdsl 831(all)

1-LAN/1-USB


Connect your computer with LAN cable or USB cable (ensure that the driver of USB should be preinstalled in your computer by the CD provided)
Open your internet explorer and type 192.168.1.1 in the address bar. Type the username and password as “admin”.
Click Configuration on the LHS, click Internet.

For customers using dialer for broadband

Delete the entry with PVC name pppoe_0_35 with the help of the icon provided on the right hand side of this row.
After deleting the entry 0/35, click Add on bottom.
Edit the VCI value as 35 instead of 38 (service category should be UBR without PCR), click Next.
Select Protocol as Bridging with Encapsulation type as LLC/SNAP. Click Next.
Leave the IP address page and Click Next.
Click Apply. It will take a moment to apply your settings.
Click System on Left hand side and click the sub title Reset and Restart.
Without checking the check box Reset to factory default settings, click Restart directly to get your modem reboot, after the modem gets rebooted, connect your broadband by using the Dialer on your desktop.


For customer using Always On mode


Click edit (Pencil type icon)button in the PVC Name pppoe_0_35.
Confirm VCI as 35, click Next.
Select Protocol as PPPoE and encapsulation as LLC/SNAP. Click Next.
Leave Blank the WAN IP settings and click Next.
Type service name as Dataone, Type the Broadband Username, Password and Confirm Password correctly as provided by BSNL. Session established by should be marked as Always on, Click Next.
Click Apply, It will take a moment to apply your settings.
Click System on Left hand side and click the sub title Reset and Restart.
Without checking the check box Reset to factory default settings, click Restart directly to get your modem reboot, after the modem gets rebooted, you are ready to use your internet connection without using dialer.

Any Question For Configure a Modem Please Reply ME!
Make Online Money Fast Use this Link
bux.to/?r=mahan2607

how do you port forward in this router ,there is no nat or virtual server option any where even in advanced settings? will appreciate the help thanks

you cant port forward on this stupid router. You need to make a dial up connection for you to accept all incoming traffic.

@lionel36
see this link.
Port Forwarding for the ZTE ZXDSL 831

If you are using Dialer mode"bridged"
change over to PPPoE Always on mode
for Advanced sub menu to appear.

try 192.168.1.1/main.html or
............................../scvrtsrv.cmd?action=view
............................../scpttrg.cmd?action=view
............................../scdmz.html for checking (whether page opens )

Feedback please.