Tab Content
No Recent Activity
About ramitzar

Basic Information

Signature


-------------
Passion is Energy

Contact


This Page
http://www.indiabroadband.net/members/ramitzar.html
Instant Messaging

Send an Instant Message to ramitzar Using...

Statistics


Total Posts
Total Posts
216
Posts Per Day
0.07
General Information
Last Activity
31st May 2014
Join Date
8th February 2012

1 Friend

Showing Friends 1 to 1 of 1

41 Likes

Page 3 of 3 FirstFirst 123
  1. walt.voltage
    walt.voltage liked post by ramitzar On thread : From mtnl to reliance
    Yes, you may !!
    Liked On: 2nd December 2012, 01:58 PM
  2. Zeeshan Ansari
    Zeeshan Ansari liked post by ramitzar On thread : Set up WIFI Router for Alliance
    Since Alliance provides Ethernet cable connectivity which will require RJ45 WAN port in your router.Unfortunately, in ZTE ZXDSL 531B RJ11 WAN port or DSL port is available. So you better use a...
    Liked On: 27th November 2012, 09:59 PM
  3. Admin
    Admin liked post by ramitzar On thread : D-link dsl 2750u adsl modem + n300 wireless router compatible with Hathway connection
    I have already said ADSL modems won't work with cable broadband. Is there any LAN port on the back of the modem provided by Hathaway ?
    Liked On: 22nd November 2012, 08:38 PM
  4. vinurvk
    vinurvk liked post by ramitzar On thread : how to change ip addres
    59 IP is given for old P2 network whereas 117 IP is given for new P3 or multiplay network.P3 has various advantages over P2 like it supports varible speed plans,multiplay convergent...
    Liked On: 17th November 2012, 08:11 PM
  5. soulix
    soulix liked post by ramitzar On thread : Configuring the modem for wireless & wired connection
    At first ur modem was in Bridge mode, so ur PCs Broadband dialer containing the Broadband username & password, directly communicated to the ISP servers which provided it a dynamic WAN IP to the PPP...
    Liked On: 5th November 2012, 11:39 AM
  6. Arvendu
    Arvendu liked post by ramitzar On thread : Windows 8 internet problem
    In PPPoE mode of the modem, the pppoe software inbuilt in the modem is used to connect to the ISPs Remote Access Server, whereas in bridge mode the raspppoe.sys file in system32 folder of windows is...
    Liked On: 3rd November 2012, 01:34 AM
  7. Admin
    Admin liked post by ramitzar On thread : Configuring the modem for wireless & wired connection
    At first ur modem was in Bridge mode, so ur PCs Broadband dialer containing the Broadband username & password, directly communicated to the ISP servers which provided it a dynamic WAN IP to the PPP...
    Liked On: 2nd November 2012, 10:08 AM
  8. sanman
    sanman liked post by ramitzar On thread : How to extend the range of Dlink DSL 2750U Router.
    dlink 2750u is the economical one.But, definitely Asus RT-N13U B1 is a better performer as a Wi-fi router although it doesn't have any inbuit modem as you have already mentioned.
    Liked On: 28th October 2012, 10:27 PM
  9. sanman
    sanman liked post by ramitzar On thread : Configuring D-link wifi DSL-2750U for Reliance broadband
    Check the manual for step by step instructions : - ftp://support.dlink.co.in/broadband/DSL-2750U/manual/DSL-2750U_C1_Manual_IN_1.00.pdf For reliance broadband, in PPPoE settings use VPI=0,...
    Liked On: 28th October 2012, 08:56 PM
  10. sanman
    sanman liked post by ramitzar On thread : Configuring D-link wifi DSL-2750U for Reliance broadband
    If its at the edge, a simple, cost-effective but ugly solution would be to use an aluminium foil as reflector, adjust suitably to get the best range possible.
    Liked On: 28th October 2012, 08:55 PM
  11. Admin
    Admin liked post by ramitzar On thread : Configuring D-link wifi DSL-2750U for Reliance broadband
    Well u should get decent strength of wi-fi signal...if possible try to position it at a central location in your house, place it at a decent height & keep the antenna upright.
    Liked On: 28th October 2012, 08:29 PM
Page 3 of 3 FirstFirst 123