Thread: help needed in using voip with linksys WAG54G2

Hi,

I am having various problems.

I have MTNL triband

I have connected linksys WAG54G2 router in bridge mode to Huawei smartax MT882 router provided by MTNL. It is working but how to enable Dhcp

I have the following confg:

Ip address - 192.168.1.6
subnet mask: 255.255.255.0
default gateway: 192.168.1.1
DNS servers : 59.179.243.70 and 203.94.243.70

If I go to the Smartax MT882 settings to enable DHCP it asks for following. What should I fill in in these fields? Waht should be the DNS servers


DHCP
DHCP Server
Client IP Pool Starting Address
Size of Client IP Pool
Primary DNS Server
Secondary DNS Server
Remote DHCP Server
DHCP Lease Time Days Hours Min


Also how to connect to my linksys router. With the default address it goes to the mtnl router. The linksys router was not installed by me so I dont know its IP adress how to connect to it now?

Also I want to use freecall Voip. Do I need to swich on DHCP servise for that?

Please help

regards

Sumir

one way of setting this up , it keeping the mtnl modem in bridged mode and your linksys router in pppoe mode.. in most cases the linksys router would be in its default ip address..
So what you can do is , Disable DHCP in mtnl, Enable dhcp in linksys.. DNS servers can be 208.67.222.222 and 208.67.220.220