help configuring: Netgear wifi router + D-Link GLB-802C router configured on PPPoE

Hi guys,

I am quite new to the networking but i have some basic understanding of how things work, but lets just say i have never dabbled too much with my modem or router .. i just let it be .. as they say why fix it if it aint broken.

I recently bought a laptop which has Wifi and thought it would be nice to have a wifi AP in the house to kinda roam about with my laptop and still have access to the internet. A friend of mine was kind enough to give me a Netgear wireless router he had spare, details of which are as below

Code:
Model:  	WGR614 v6	
S/W Version:  	2.5.21_2.5.21
I also have a Dlink ADSL 2+ router , details given below

Code:
Model:  	GLB-802C	
H/W Version:  	A1
DSL Version:  	E.37.9.48
S/W Version:  	2.5.060823e1
which is right now connected directly to my PC in PPPoE mode. I subscribe to MTNL mumbai. what I want to do is introduce my Netgear router into this lill network to make it a wifi access point.

my ethernet connection on the pc is configured to get its IP through dhcp and has DNS address assigened to it like so

(i couldnt put up any screen shots as the forum wouldnt allow me to post links)

Code:
IP Address:	192.168.1.3
subnet:		255.255.255.0
gateway:	192.168.1.1
DNS:		203.94.227.70
		203.94.243.70
heres how my DLink GLB-802C ADSL 2+ router is configured


Code:
Device	DSL
Model:  	GLB-802C	Operational Status:  	 Showtime/Data
H/W Version:  	A1		DSL Version:  	E.37.9.48
S/W Version:  	2.5.060823e1	Annex Type:  	ADSL2
Up Time:  	1:45:15		Standard:  	ADSL2+ Auto
Connected Standard:  	ADSL2+
 	
 
WAN Interfaces
WAN type	IP Address	Mask		Gateway		VPI/VCI	Status
PPPoE		59.184.241.176	255.255.255.255	59.184.255.253	0/32	Ready
PPPoE		0.0.0.0		0.0.0.0		0.0.0.0		0/35	
PPPoE		0.0.0.0		0.0.0.0		0.0.0.0		0/33	
PPPoE		0.0.0.0		0.0.0.0		0.0.0.0		1/32	
 
LAN Interface
Interface	Mac Address	IP Address	Mask	Speed	Duplex	Status
eth-0	00:17:7C:06:C0:33	192.168.1.1	255.255.255.0	100BT	Full	
usb-0	-	192.168.1.2	255.255.255.0	-	-	
 

(DHCP) Server Configuration

Start IP Address	192.168.1.3
End IP Address		192.168.1.34
Gateway Address		0.0.0.0	
Status			Enabled	    

IP Route Table

Destination	Netmask		NextHop		IF Name		Route Type	Route Origin	
0.0.0.0		0.0.0.0		59.184.255.253	ppp-0		Indirect	Dynamic	
59.184.241.176	255.255.255.255	127.0.0.1	lo-0		Direct		Dynamic	
59.184.255.253	255.255.255.255	59.184.241.176	ppp-0		Direct		Dynamic	
59.185.0.23	255.255.255.255	59.184.255.253	ppp-0		Indirect	Dynamic	
127.0.0.0	255.0.0.0	127.0.0.1	lo-0		Direct		Dynamic	
192.168.1.0	255.255.255.0	192.168.1.1	eth-0		Direct		Dynamic	
192.168.1.1	255.255.255.255	127.0.0.1	lo-0		Direct		Dynamic	
192.168.1.2	255.255.255.255	127.0.0.1	lo-0		Direct		Dynamic	
203.94.227.70	255.255.255.255	59.184.255.253	ppp-0		Indirect	Dynamic
now my understanding, after going through varieous posts, is that i can keep all the settings of the DLink GLB-802C ADSL 2+ router. All would have to do is to use my Netgear WGR614 wifi router as just a switch. I changed the IP address of the Netgear WGR614 wifi router to 192.168.1.3. i did not assigen anything to the wan config .. as i thought i aint using any of the routing functions of the Netgear WGR614 wifi router. i turned off DHCP on the Netgear WGR614 wifi router. and made the IP address on the PC static to

I
Code:
P Address:	192.168.1.10
subnet:	255.255.255.0
gateway:	192.168.1.3
after that I connected my Pc to one of the four LAN ports on the Netgear WGR614 wifi router and connected one of the remaining LAN ports to the WAN port of the DLink GLB-802C ADSL 2+ router. Switched on everything, but sadly no internet ..

i can access both the devices using thier IP addresses

Code:
DLink GLB-802C ADSL 2+ router:	192.168.1.1 
Netgear WGR614 wifi router:	192.168.1.3 
PC				192.168.1.3
all the lights blink on both the devices when turned on ie .. ADSL,Data,LAN. I think whats happeneing is i did some mistake in the DNS settings .. as in the initial connection the DNS was fed in statically in the PC TCP/IP settings .. which i dint change

any body have a clue as to what must be going wrong ??

thanks for any insight .. and am sorry if the post is not clear enough .. gimmie a shout if you guys need anymore info


//Moderator note: You have not activated your account. Please click on the link in the mail you received from the forum admin in your mailbox. Failure to do so will cause all your posts go into moderation. - just4kix