Thread: MTNL Static IP

Hi,
I want to set my router on Bridge mode using the static IP I got from MTNL. The guys at MTNL are anything but helpful. I cant seem to configure the router in bridge mode as I do not have all the necessary information. I am looking for the default gateway and subnet mask which I need to set in the router. If someone can provide the info, I would be more than happy. My IP is something like 120.XX.XX.5.

I have tried using subnet mask as 255.255.255.255 while gateway as 59.183.191.254 however the router does not seem to accept the 59.* gateway.

Any help received would be appreciated. Thank You.

Mention your modem model/make.

My IP is something like 120.XX.XX.5.

I have tried using subnet mask as 255.255.255.255 while gateway as 59.183.191.254 however the router does not seem to accept the 59.* gateway.

59.183.191.254 IN INDIA MAHARASHTRA BOMBAY MTNL CAT B ISP
which page in router this was entered ?

Your Gateway is 192.168.1.1 ( modem/routers)
subnet mask usually 255.255.255.0



2.

Start/ Network LAN properties
TCP/IP
properties
Enter
Obtain IP address automatically.
DNS also same or
opendns 208.67.220.220.
208.67.222.222
SAVE Apply.

3. Post Ipconfig /all data
START [B]RUN [B]type cmd type ipconfig /all

4. If connected to Internet
test here : h t t p://www.ip-adress.com/

Feedback.

Hi,
Thanks for the reply. I am using Linksys WAG200G. I am not trying to configure Port Forwarding or Port Triggering. I want to set the router in RFC 1483 Bridged mode where it is asking for:

IP Address: 120.XX.XX.5
Subnet Mask: 255.255.255.255
Default Gateway: [This is what I want]
Primary DNS: The one provided by MTNL
Secondary DNS: The one provided by MTNL