Thread: PC formatted - Configuration for GLB-802C

I just formatted my PC and installed the onboard realtek driver fro my mobo installation CD. The rest of the modem settings were unchanged and when I switched on the modem, the LAN and ADSL lights are glowing. But I can't surf the internet.

I feel like I'm missing out on something basic. My comp is set up with dynamic ip address config. When I tried to ping the screen dissappeared automatically after 2 tries.

I am a noob so will appreciate detailed answers. Thanks!

can u ping your modem ?
ping 192.168.1.1

start> run ping 192.168.1.1

IF you formatted your PC and loaded the Ether net
card drivers,

THEN
assuming you have not chnaged modem settings

Start Network LAN Properties
Click TCP/IP
properties
Select Obtain IP address automatically
or enter
192.168.1.10
255.255.255.0
192.168.1.1
DNS
present entries or
Open DNS
208.67.220 220
208067.222.222
APPLY Save.

On top of same page the ether net card entry will appear
Click Configure button
Check it is enabled.

Feedback

REF:http://www.dlink.co.in/GLB502T_Guide_modified/index.htm