Thread: How to configure LINKSYS WAG200G with MTNL broadband ?

Hi,


I have a Linksys WAG200G router but i m unable to configure it with my mtnl broadband connection . if somebody is using this router pls put the screenshots for the same.

thanks in advance

1.
Are you using any other ADSl modem to connect to Internet ?
2.
Did you use the Linksy's Wizard?


VPI VCI for MTNL is 0 and 32 confirm.
REF:
v Solve IT 4 u Blog Archive Linksys WAG200G configuration

Originally Posted by essbebe

1.
Are you using any other ADSl modem to connect to Internet ?
2.
Did you use the Linksy's Wizard?


VPI VCI for MTNL is 0 and 32 confirm.

Presently i m using MTNL MT882 router

But now i want to replace it with Linksys WAG200G... i tired all the configration settings as per mtnl website but unable to made it functional..

pls put the screen shots for all settings...


one more thing ... wht username and password i have to put inside the confige settings of ISP provider

1.
The USERID AND pw as given to you by MTNL. (in WAn page boxes)
reconfirm VPI and VCI.
DNS enter open dns 208.67.220.220 and 208.67.222.222 or google 8.8.8.8
2.
Copy paste this data here:
Start RUN type cmd Ok
New Window
Type ipconfig /all

3.

WAG200g Linksys BASIC setup

REFERENCE:
Basic Setup

101.Encaspulation: rfc2516 PPPoE
102 Multiplexing...: LLC
103 Qos Type......... UBR
104.......

105 ......
106 Auto Detect :...Enable
107 Virtual Circuit..0 VPI
108 ....................... 32 VCI ( for MTNL )
109 DSL modulation: multiMode
( GDMT preferred)
110 Username ..... as given by MTNL
111. Password...... same as above

Rest No change now
120. Time settings IST not seen select GMT+05.00
121 try to edit to +0530 ( later)
122 or Time Interval 1800 seconds
125 save settings

Wait FOR A MINUTE.
( click Help for explanations if needed )
Numbers given for reference .quote in reply.
FEED back.

Originally Posted by essbebe

1.
The USERID AND pw as given to you by MTNL. (in WAn page boxes)
reconfirm VPI and VCI.
DNS enter open dns 208.67.220.220 and 208.67.222.222 or google 8.8.8.8
2.
Copy paste this data here:
Start RUN type cmd Ok
New Window
Type ipconfig /all

3.

WAG200g Linksys BASIC setup

REFERENCE:

101.Encaspulation: rfc2516 PPPoE
102 Multiplexing...: LLC
103 Qos Type......... UBR
104.......

105 ......
106 Auto Detect :...Enable
107 Virtual Circuit..0 VPI
108 ....................... 32 VCI ( for MTNL )
109 DSL modulation: multiMode
( GDMT preferred)
110 Username ..... as given by MTNL
111. Password...... same as above

Rest No change now
120. Time settings IST not seen select GMT+05.00
121 try to edit to +0530 ( later)
122 or Time Interval 1800 seconds
125 save settings

Wait FOR A MINUTE.
( click Help for explanations if needed )
Numbers given for reference .quote in reply.
FEED back.

THANKS ... I WAS USING THE WORNG USERID AND PASSWORD.... It started working

Please confirm about time Zone entry.
for I.S.T G.M.T + 0530

Hi

Can you specify the price of LINKSYS WAG200G.. Also, let me know its availability in Mumbai?