Thread: configuring static ip mtnl. 220bx

hello friends,

i need to now that how do i configure the static ipon my adsl+2 beetel 220bx modem which is normally coming with airtel connection.

and how many way i can use static ip to use its maximum.
specially my concern to watch my home cam using static ip connection.

Are you now connected to Internet with 220BX
set for MTNl VPI VCI O and 32 ?

Which MTNL tariff plan you use?
Do they provide Static IP?
see the UT300r2u link given below.

Originally Posted by essbebe

Are you now connected to Internet with 220BX
set for MTNl VPI VCI O and 32 ?

Which MTNL tariff plan you use?
Do they provide Static IP?
see the UT300r2u link given below.

thank you very much for your reply,
yes i am using vpi 0 and vci 32.
i am using mtnl dual combo 256kbps which is now known as 512kbps.
yes they give me a static ip.

and pl. don't mind, i haven't find any good information in UT300r2u to configuring static ip.

I checked my modem similar to yours.
In Device Info WAN when connected IP allotted is shown) > no other option available.
You may get the same IP every time you connect.

To confirm you have a static IP always:
when ever, you connect and disconnect the modem
check your IP here.
http://whatismyipaddress.com/

2.

watching home cam

makes no difference OFF LINE/ON LINE.

that is true i am getting same ip from last few days but is this ip can use to connect system anywhere. or can i use this ip watching my home cam..

not understand the 2 point "makes no difference OFF LINE/ON LINE." can you pl. give a little brief on it.

There are two types of IP, internal and external. Hope you are talking about external IP. If you have an external IP, there is no need to configure it. It will be the same whenever you connect to internet.This is of no use for domestic users. Normally people who runs servers use this.

On the other hand internal IP can be static. It helps you in port forwarding. Normally it is 192.168.1.2. You can configure it in the range 192.168.1.0 -255.

or can i use this ip watching my home cam..

Your query not clear.
You have a STATIC IP allotted by MTNL to you.
You keep your system on with a WEBcam or Home cam connected and go ONLINE.
From somewhere else you want to monitor
the activities in your own location .

For this you have to access your System
remotely.
Whether static IP or Dynamic IP makes no difference.
In SKYPE : we can use web cams to see each other when we Talk or use chat mode.



@meetdilip more details if required please.

"essbebe"
ok then i may use team-viewer but is their any advantages using static ip.
i know this discussion go little more away from actual query but if it is possible then pl. answer..

"essbebe"
ok then i may use teamviewer but is their any advantages using static ip.

Please start new thread. else this thread becomes your BLOG site ! and you raise all sorts of queries .

Originally Posted by bobby_3231

"essbebe"
ok then i may use team-viewer but is their any advantages using static ip.
i know this discussion go little more away from actual query but if it is possible then pl. answer..

MTNL connections do not come with static IP. If you need a static IP you need apply separately. Have you applied ? Static IP comes with a lot of disadvantages for domestic users. Better not to opt it. Team viewer is the best remote support software available.