Thread: Wireless Modem/Router

Does any one know which Wireless Rouetr/Modem does MTNL provide with its Triband connection? Do I get to choose the model or something? Which one do you suggest? I need the Wireless modem as I already have a wifi network set up for my home office.

AFAIK its a UTstarcom WA3002-G4 wireless router and u dont get to choose the model..u accept watever they give u

I just got bb installed from MTNL and hv got WA3002-g4 router pre-configured by them.
I want to change the wireless network access key as MTNL default scheme is too well known.
I am on wireless mode. In interface setup menu I can see I Can see Authentication type " WEP-64 bits" and radio button Key#1 has some numerics in Hex code.
I would like to enhance the security to say WPA-PSK with TKIP
or WPA2-PSK . How to do it is not clear from the user guide and MTNL helpline is almost impossible to get thru. I am not familiar with hex notations and would like to rely on ASCII symbols only. Also I need to connect two laptops at least and the configurations steps for both are needed.
Can anyone please help me....
Thanks in advance

Originally Posted by cyberwiz

AFAIK its a UTstarcom WA3002-G4 wireless router and u dont get to choose the model..u accept watever they give u

hi..m also from delhi...n i develop modems n routers firmware..i also do their hardware modification...m finding person of my intreset so sending you PM...my mobile is 9999175225.......reply with ur number..i need to talkt to u

Dear All

I'm using DLink's ADSL Router D-520T for more than 6 years now.

I got one Belkin Wireless G Router and one Dlink's N150 USB wifi adaptor.

I connected the DLnik's ADSL router and Belkin's G router as per the diagram suggested in the forum/internet.

I can see my Belkin in the Network but not able to browse.

Kindly provide step by step guide to help me diagnose the problem since MTNL lines are not working (1504) for last 5 days and nobody knows what is to be done.

Thanks in advance.

Sanjay
Navi Mumbai

(1)Mention OS Used : Windows 7 /vista /XP.???
( IF Window 7 check use of application "Connectify" for AP.

(2)
No of systems in use Desktop/ laptop / smart phones .??

(3)
Ensure Dlink 502T is in PPPoE mode
( userid/PW entered/stored/in WAN page of modem )

(4)
Enable DHCP give a range say 192.168.1.2 to 192.168.1.25

(5)
Wireless: try without security key.


(6)
Disable MAC filter and white list . Channel Auto or 6 or 11.

(7)
Feedback if still unable to surf in wifi mode. ( No cables )
Copy paste ONLY data for WLAN ( no tunnel data )
Start RUN type cmd OK
New window
type ipconfig /all

Reference page :
http://i169.photobucket.com/albums/u...Statuspage.jpg

Thanks for quick response.

I have Windows 7 but I need a step by step guide to start with.

Regards.

Sanjay

I prefer item wise replies to my post

I have Windows 7 but I need a step by step guide to start with..

Unable to guide as requirement is vague. see above.

1) Windows 7
2) one desktop
3) yes, it is.
4) will do
5) it always ask for the password which I don't know - how to remove password
6) will do
7) will report tomorrow after checking at home tonight.

Dlink502T Desktop + D'linkN150 USB modem
to set up Belkin Wireless G Router Model No not provided.

Item No 1 :Windows 7( Home/pro/ultimate etc )
"Connectify" not required/useful for single desktop.

Item No 2:

one desktop

+ unit Dlink's N150 USB wifi adapter.
Download or see attachment.

quick REF:
http://files.dlink.com.au/Products/D..._QIG_v1.10.pdf

(3)

In PPPoE mode ( "always On")

OK.
(4)

DHC enabled :

OK.
for a single system not essential.

(5)

Wireless: try without security key.

it always ask for the password which I don't know - how to remove password
security key. used wep wpa etc . better to disable and try first.
Need wifi menu page. as screen shot.

(6)

Disable MAC filter and white list Channel Auto or 6 or 11 .

reply awaited.
(7)

Feedback and ipconfig /all data

reply awaited.

(8)
Refer status page screen shot ( may be same ) and check what details are missing.

Hi essbebe

After resetting the Belkin router and using default settings, I was able to connect Belkin router from Dlink N150 USB adapter successfully. Internet was fine.

Thanks a lot for your tips yesterday.

Now my wifi is open and not secured - it has default name belkin54g and doesn't prompt any authentication or password. My mobile can detect the wifi and is able to connect without any password.

I need the simplest (& safe) technique to avoid this. It should not connect with any device without a password.

Please assist.

Thanks in advance.

(8)
Backup existing router settings to say C:/My Documents/Belkins router. ( menu item seen on left list )
(9)
Select this menu page.
http://www.pcwintech.com/files/scree...v-2000/008.png
Select WEP or WPA. try wep first.

Item (8) is clear. will try tonight.
Item (9) link takes me to another site, not clear what you want to communicate.
Please clarify. My Belkin Wireless G router model is F5D7230-4.
Thanks in advance.

(9)
Now only you are mentioning the Model number
The screen shot posted as specimen page.
http://www.pcwintech.com/files/scree...v-2000/008.png
and if the page is not same , confirm.
Make changes in your router for wifi security.
As it is try a plain key : say sanjaydutt

I have problem connecting two devices together with Dlink 502 Router + Belkin WIFi Router setup.

For example, if am connected to the Belkin router with my Dlink WiFi adapter at my desktop, it works fine. As soon as my cousin connect his WiFi mobile with Belkin router, i lose my connectivity while he enjoys his web surfing. I can't connect again unless he disconnects his WiFi.

Please resolve this issue for me.

Thanks.

Please see Post No 6. Item wise response, whichever applicable.
You can enable UpNp box if seen in 502T router.

Your ISP is MTNL ?
OS used ? windows 7 XP Vista etc.

Thanks for quick response.

I'll try these tonight and will revert tomorrow.

NEW ProbLEM
As soon as my cousin connect his WiFi mobile with Belkin router,....{/B]
You can also install "connectify" in your laptop. (*) laptop in LAN mode (*)
for new AP for the smart Phone. Test in limited range.
Deny access to Belkins wifi sssid.
Sorry.
I did not notice that you were the same user/member !!