Thread: how to configure mtnl with beetal 450 tc1

I have the same Firmware version. No problem felt.
TM4-0Q-008 . Firmware upgrade possible./can be tried.

In your post No 21 screen shot.
Select Wireless Channel as 11 instead of AUTO> Also try Channel 6.

Since yours is a new Unit would like to check the settings ONLINE.
Send PM ( Private Message) if access is allowed by you )

i have changed the channel to 6 but the problem persists..

I changed to Channel 11 . does it remain ?

Hi,
I had managed to configure my beetel ADSL Wifi router 450bx1 with MTNL ,it was earlier used for Airtel, for more than six months. But during this X'Mas holidays i was out of station & when i came back , i found that the Wi-fi is not function although the WLAN led works well while power restart or while changing some settings but yet the Wi-FI is not functioning whereas LAN router is well ok. I had hard-reset this also but yet no success with Wi-fi, If anybody could help.

Check for settings in BSNL forum. ( or below)
Confirm connecting in PPPoE mode ( ID/PW entered in WAn page)
Enabled dhcp ( usually in LAN page )
IN Wireless Basic Page Button enabled ?
ensure MAC address white list is disabled.
confirm SSID appears in system ( laptop).

Feedback.


UTSTAR WA3002-G4 quick reference

Hi,
Have done all the settings as per your links....but no success...

Check for settings in BSNL forum. ( or below)

Confirm connecting in PPPoE mode ( ID/PW entered in WAn page)
Enabled dhcp ( usually in LAN page )
IN Wireless Basic Page Button enabled ?
ensure MAC address white list is disabled.
confirm SSID appears in system ( laptop).

You have confirmed all the above done. No success.

video
http://www.youtube.com/watch?v=ONxggaH6tmc&NR=1

Post as screen shot jpg attachment WI page settings.
( Go advanced/ scroll down/ Attach files/Manage attachments/upload)

Also copy/paste ipconfig /all data here.or as .*.doc
Start RUN type cmd Ok New window type ipconfig /all

Hey there...I have changed My connection from airtel delhi to mtnl...I have a mac computer...I am at the interface setup page inside modem setting...please tell me what to do...

Select PVC0 which will show vpi /vci 0 and 32 ( for MTNL)
Compare settings of Airtel Page likely (PVC2 1 and 32) and enter Mtnl Id/PW etc. in PVC0 SAVE.
Reboot from current settings from Firmware menu page.
feedback.
Screen shots for ref: ( wifi later if required )
http://mybroadbandforum.com/viewtopic.php?f=64&t=2846