Thread: Can't get login page WRTP54G with linksys

I have a reliance broadband internet connection. When I connect the cable directly to my laptop and browse internet the first page I open will go to reliancebroadband.co.in for authentication and once authenticated the subsequent internet access will work fine

However when I connect the internet cable RJ45 to the internet port of the Linksys WRTP54G wireless router and connect the LAN cable from router to laptop I don't get the login page.

The only setting I have changed on the router side is as follows:-

Under Setup >>> MAC Address Clone >>> Enable >>> Click “Clone your PC’s MAC”

Can someone please assist me on how to get this working.

Regards,
Sufiyan

1.Connect the ethernet cable from your PC to one of the 4 LAN ports of the router.
2.Then connect your cable of DSL modem's Ethernet cable to the Router's Internet port.
3.
Confirm you have Installation CD.
4.
Give details of the ADSL MODEM supplied by Reliance.
.
5
For wifi mode in Reliance landline based broadband connection.
see this thread.
http://www.indiabroadband.net/relian...ter-guide.html (Reliance Wired Broadband - Wifi with ADSL modem+router guide)

1.Connect the ethernet cable from your PC to one of the 4 LAN ports of the router. -- Done
2.Then connect your cable of DSL modem's Ethernet cable to the Router's Internet port. -- Done
3.Confirm you have Installation CD. -- I dont have the installation CD. Where do I get it from.
4.Give details of the ADSL MODEM supplied by Reliance. -- I dont have the modem at my end. I just have the cable at my end.

try this link.
or google search: wrtp54g setup.
Configuring Linksys WRTP54G

I tried all the settings but still I am NOT getting the reliancebroadband.co.in home page when I am connected via the router.

I am able to ping the router from my laptop but not the router's gateway
I am able to ping my laptop from my router

This is the status I see on my router

Router Tab
Firmware Version: 3.1.27
Current Time: Not Available
MAC Address: 00:xx:2C:01:xx:xx
Login Type: DHCP
Internet IP Address: 123.236.x.x
Subnet Mask: 255.255.255.0
Default Gateway: 123.236.7.1
DNS 1: 124.124.5.141
DNS 2: 124.124.5.140
DNS 3: 124.124.5.136
MTU: 1500

LAN Tab
MAC Address: 00:14:BF3:9F:FE
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
DHCP Server: Enabled

Wireless Tab
Wireless Firmware Version: 1.6.0.24
MAC Address: 00:xx:BF:xx:A0:00
Status: Enable
Mode: Mixed
SSID: linksys
Channel: 6
Encryption Function: Disable

Is anyone ever able to connect to relianceboadband.co.in using linksys or any other router in Mumbai???

Is anyone ever able to connect to relianceboadband.co.in using linksys or any other router in Mumbai???

with ONLY wifi router may not be possible

Try this: In wif router.
Does the connection need USERID and Pw.?
click Yes and enter reliance ID and PW.
Now connect reliance rj45 to Internet Port.

With PPPoE setting when I specify the username and password, I get Cannot reach the PPPoE server.

Status
Login Type: PPPOE
Login Status: Connecting
Internet IP Address: 0.0.0.0
DNS 1: 0.0.0.0
DNS 2: 0.0.0.0
DNS 3: 0.0.0.0
MTU: 1492

With "Obtain IP automatically" setting I get reliance IP and DNS assigned to the router. But when I hit any site I dont get the reliancebroadband.co.in homepage to authenticate. In short it does not work with any setting and tweaks I have done so far.

1. Connect your DSL or Cable modem(RJ45) to the router’s internet port

(*2.deleted.)

3. Connect the rest of the PCs to any of the router’s ethernet ports.

4. Open your browser and type in the router’s ip address, default is 192.168.15.1 (http://192.168.15.1)

5. Once connected and prompted for the username and password, Enter admin as username and admin as password. etc.
2.
In your computer tcp/ip properties
select obtain Ip address automatically.
Use Reliance DNS.
DNS 1: 124.124.5.141
DNS 2: 124.124.5.140
DNS 3: 124.124.5.136
MTU: 1500 change to 1492.

Apply Save..

With PPPoE setting when I specify......

Post as Annexure jpg picture of router's page where you enter ID/PW
Also previous one.

Do you mean I need to select "obtain Ip address automatically" in the router and change the MTU to 1492

OR

Do you mean I need to select "PPPoE" in the router and change the MTU to 1492. With this option I get "Cannot reach the PPPoE server" in the router status page.

I have attached some screen shots from the router

Disable dhcp . ( log in type now DHCP see below )

Also In WIFI router any "MER" option seen ? ( NOT PPPoE or "bridged")
list optional settings (post screen shot).

Try wifi channel 11 also.

Appears all Reliance Ip and dns entered correctly.

MTU : try1492 or 1500 ( lower figures in steps of 8 not needed)

I didn't find any "MER" option.
NO luck with wifi channel 11 and MTU = 492 or 1500
There are only 3 options available are

1. Obtain an IP automatically
2. PPPoE
3. Static IP

Sorry. so far no recent posts from users
who could connect in WIFI mode Reliance BB connection.
You have to log in to connect to Reliance and as per @glass only "MER" option works.
Para two:
Try Static Ip and enter Default Gateway: 123.236.7.1
( hope this is the gateway for you always )
feedback.

Originally Posted by sufiyan

I didn't find any "MER" option.
...

1. Obtain an IP automatically
2. PPPoE
3. Static IP

MER = Dynamic = Obtain an IP automatically

Summary of the steps performed so far:-

I have a reliance broadband internet connection. I dont have the modem at my end. I just have the cable at my end.
When I connect the cable directly to my laptop and browse internet the first page I open will go to reliancebroadband.co.in for authentication and once authenticated the subsequent internet access will work fine

However when I connect the internet cable RJ45 to the internet port of the Linksys WRTP54G wireless router and connect the LAN cable from router to laptop I don't get the login page.

Steps performed:-

1.Connect the ethernet cable from your PC to one of the 4 LAN ports of the router.
2.Then connect your cable of DSL modem's Ethernet cable to the Router's Internet port. -- Done
3.Under Setup >>> MAC Address Clone >>> Enable >>> Click “Clone your PC’s MAC”

I tried all the settings but still I am NOT getting the reliancebroadband.co.in home page when I am connected via the router.
I am able to ping the router from my laptop but not the router's gateway
I am able to ping my laptop from my router

This is the status I see on my router

Router Tab
Firmware Version: 3.1.27
Current Time: Not Available
MAC Address: 00:xx:2C:01:xx:xx
Login Type: DHCP
Internet IP Address: 123.236.x.x
Subnet Mask: 255.255.255.0
Default Gateway: 123.236.7.1
DNS 1: 124.124.5.141
DNS 2: 124.124.5.140
DNS 3: 124.124.5.136
MTU: 1500

LAN Tab
MAC Address: 00:14:BF3:9F:FE
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
DHCP Server: Enabled

Wireless Tab
Wireless Firmware Version: 1.6.0.24
MAC Address: 00:xx:BF:xx:A0:00
Status: Enable
Mode: Mixed
SSID: linksys
Channel: 6
Encryption Function: Disable

With MER = Dynamic = Obtain an IP automatically, setting I get reliance IP and DNS assigned to the router. But when I hit any site I dont get the reliancebroadband.co.in homepage to authenticate.

With PPPoE setting when I specify the username and password, I get Cannot reach the PPPoE server status in the router.

I tried changing the MTU setting to Auto/1500/1492 without any luck.
I tried changing the wifi channel to 6 and 11 without any luck.

Regards,
Sufiyan

Did you try typing reliancebroadband.co.in into the browser directly?

Can you post your pc's network settings?

reliancebroadband.co.in on the browser gives "page cannot be displayed"

pc's network settings "Obtain an IP address automatically"

I tried manually giving reliance DNS servers with no luck