Thread: Help Share My Reliance Connection With Other PC

Help Share My Reliance Connection With Other PC

Hey friends i have a reliance broadband connection.
i was running two more pc's by the help of switch simultaneously all 3 together.
but my router got faulty and it had to be changed
he change it to "binatone DT815 adsl2/2+Ethernet Router".

Now it Has some other router settings in the configuration page.
i am not able to make the settings so that i can use my other pc's simultaneously via switch.
please have a look at the setting picture..
and plz tell me how to configure what

http://mybroadbandforum.com/beetel-1...e-1-t2846.html

Select PVC0 and select PPPoE mode vpi/vci for Reliance 0 and 35
enter userid/PW in wan page..
repost connection status.
feedback
All other PVCs will remain 1483Bridged mode.

this data should appear :

brother i am inserting ip 192.168.1.9
255.255.255.0
192.168.1.1

preferred dns 192.168.1.1
alternate dns 8.8.8.8

i am still not able to connect even to my pc after inserting ip
but by obtain ip automatically i am able to

If you want to connect one more system
select PPPoE enable DHCP in modem.
In computers network settings tcp/ip properties
obtain ip address automatically.
feedback.
PS: this model has a USB port ?
see for screen shots.
http://mybroadbandforum.com/beetel-1...e-1-t2846.html

Brother it doesnt have a usb port
i have posted the modems picture
and what i have to configure in the modem settings i have posted that picture
also so you can tell me plz
and what ips i should set on my other pc's

i am still not able to connect even to my pc after inserting ip but by obtain ip automatically i am able to

(A)
Your Reliance userID: newuser ? ( picture 5.jpg)
Enter the correct ID ( need not post it here )

(B)
Once you have selected DHCP in your modem
All computers
Network LAN properties
new window :
select TCP/IP ipv4
Properties
Select button Obtain IP address automatically.
Apply Save.

see discussion here;

http://www.indiabroadband.net/bsnl-b...tel450tc1.html (beetel450tc1)

thanks man i will try this out

and i should set obtain ip automatically in all my pc's.

if i choose dynamic ip instead of pppoe is there a difference

brother i have done the settings and all modem lights are working means data is getting recived but i am not able to connect to internet

i have set "obtain ip address" automatically on my pc
and obtain dns automatically

here are the settings picture
can u figure out the problem i think pppoe is not available in reliance

Post No 7 and Post No 8.
.wait.......

post number 7 image and no 8 image
??????

You can delete them.
I also said wait...... to check up your settings

Did you click SAVE button at end of WAN page ?
select PVC's summary and post screen shot.
In access management menu deactivate acl and cwmp

Go to Maintenance and REBOOT from current settings.

For all PVC's you will get same snr/attn data
Only difference for you WAN column for PVC0 should show connected.

Screen shots from my modem.

Thanks iT hAS bEEN sOLVED A LOT EARLIER

thank you for your fast reply

god bless you brother

i too have this problem plz solve for me

Originally Posted by rajeshcacil

i too have this problem plz solve for me

hey rajesh open the modem page by typing
192.168.1.1 in the address bar
then username is admin password is password

then go to interface setup got to lan
and in Encapsulation choose dynamic ip address and save settings

dont change anything else
then
set ur ip address to 192.168.1.5
255.255.255.0
192.168.1.1
192.168.1.1
8.8.8.8

and set the same to ur other pc,s just change the 5 to any number 192.168.1.9 and the rest ip are the same for others