Thread: How to setup the wireless accesspoint Dlink DWL2100 with the Binatone DT815

hey can you help to setup the wireless accesspoint Dlink DWL2100 with the Binatone DT815 ..

I am using Relaince Boad band Connection...

When ever i want to access internet it need to be logon to Relinace login page.. here it is the link
reliancebroadband.co.in/reliance/login.do


Here it is the Problem:

if i logon to the relince login page withmy user name & password then only i can access the net...


to access the internet in my laptop and aswell as my Desktop i have brought a Dlink DWL2100AP and i have Configure with Binatone DT815 ADSL2+Router but the problem is

when ever i want to access the net in both the systems it asking me to login to relince login page..if i try to login to the page it shows an error as " your previous session has been terminated"
plz checkout the attached file...

this error message shows in one system when i try to login to laptop or desktop if i have already logged into relince broad band in any one of the system...
so can you help me resolve this problem...


with regards
roja

Step 1 :
Can you set the BinatoneDT815 modem IN Interface page
PVC2 to PPPoE mode(VPI/VCI 0 and 35)
( may be now in 1483 Bridged Mode )
and enter your Reliance userid/PW.
.Select Dynamic IP DNS auto select etc.
SAVE.
Reboot from Management from current settings.
Feedback.

Mention OS used : Windows 7 /Vista/XPsp3 etc.

hey Thanqs for your response...

yes i have configured as you said for Binatone modem IN Interface page

i have selected the PVC2 to PPPoE mode(VPI/VCI 0 and 35)

but the VPI/VCI values are 2 and 33.. only

iave selected all the option as u said butis not working...

it shows not connected...

plz help mee...

Hey can you see the attached file of my settings

For Reliance Broadband confirm VPI/VCi is 0 and 35
You can change it.
or check in which PVC 0 and 35 are seen.


Click the button PVC list in the Interface page ( top )near Pvc select button and see the status.
Example page:
http://www.indiabroadband.net/attach...-pvc2-only.jpg

Device Info defaults to PVC0. and will show snr/attn for all
Same in Diagnostics page..

Hai can you help me to configure Reliance Binatone DT815 to access the internet in multiple system simultaneously

i don't have the IP address and subnetmask as well as default gateway and DNs Server please let me know how to get these Address..and also

if you don't mind could you please send me the whole configuration setting images to me for this problem..

QUICKFIX!
IN PVC which has 0 and 35
Change "1483Bridged" to PPPoE. enter Reliance Id/PW
Ip dyanamic select DNS auto select.
SAVE. Reboot. from Management System restart current settings.
confirm you get connected without login in system ( browser)
similar model:
http://www.indiabroadband.net/attach...1&d=1319550204

2.
wifi settings next.

HI Happy Diwali..

see yaar i have atached my configuration setting here as you said but it not working plz let me know more about the thins...that how to configure it i want accesse the internet in both laptop as well as Desktop at time becouse i am woking in BIG MNC as S/w Engineer and i have to work with both the system plz help me.....


see..! i have attached my configuration setting here....

Diwali greetings to you.

(1)
I think Reliance VCI is 35 whereas you have set 34
Or
(2)
are you getting connected "Bridged "
is selected. and VPI/VCI is set to 0 and 34. ?
(3)
Other settings are OK. Device Info stats very good except No connection !
and Device info will show connected after above change.
and PVC0 to PVC6 ALL will show snr/attn data !!!

After making any changes click SAVE at the bottom.
Then Maintenance "System Reboot " current settings.

New window will open showing a slider . wait for 100%
Then confirm you get connected to Reliance automatically.
The ID /PW entered should have worked in :bridged" mode also.

Wifi settings later.
Feedback.

ye my Connection is "Bridged " modeand it is selected. and VPI/VCI is set to 0 and 34.
but after i have selected the PVC2 to PPPoE mode automatically it takes 0 to 34

ye my Connection is "Bridged " mode and it is selected. and VPI/VCI is set to 0 and 34.
Are you connected to Internet now with this modem Binatone in
"BRIDGED" mode selected.?
wait......
confirm this page (0 and 34 connected for you in "bridged") or post Screenshot : ( my working modem similar )
All factory default VPI/VCI values.
http://www.indiabroadband.net/attach...ci-pvclist.jpg

yes my connection is bridge mode..

see actual connection of my Binatone

Sorry i haven't find any "service information summery"

and how can i get it..?

Interface: Internet
where you change PVC numbers. wait for screen shot.
http://www.indiabroadband.net/attach...1&d=1319632196

Now you had set PVC0 in "Bridged" mode and you cannot set PVC2 in PPPoE mode. for 0 and 35 So you might have changed it to 34!! Duplicate Not allowed !!!
You can SET PVC0
vpi/vci to 0 and 35 PPPoE mode enter ID/PW etc SAVE.

Feedback.

wait...
i'll get it..

see i havent change any values these are the default values..

YOU have to Change to 0 and 35 in any PVC PPPoE mode.
Change in PVC0.now.
Deactivate PVC1 also.

This model supplied by AIRTEL ??
Feedback.

if i change the PVC 1 to 0 in PPPoE it show's an error as

" ERROR: FAIL TO UPDATE DUE TO...DUplicate to PVI/VCI !"

Change in PVC 3 vpi 0 vco 35 PPPoE etc . SAVE
If still you get error message as above PVC2 is 0 and 35.

If connected to internet
check http://checkip.dyndns.com/
post it here ; Example 11x.xx.xxx.xx
for me to check/change your modem settings. post it here
Modem ID presume admin PW admin.

sorry yaar same problem for PVC 03 also..

here it is the Ip nd username pwd..
123.236.157.111
userName : admin
password : password

Delete the Ip address. Unable to access your modem.
Reboot from Factory settings and see whether vpi/vci in PVC2 changed to 0 and 35.

ok i'll try it now ....which IP I have to remove nad i have restarted from factory setting but PVC02 values it doesn't change.....

it remain same ie 0 to 34 only

Try again PVC0 for PPPoE mode. 0 35
What is the Firmware version shown on top Status device info ?

Ip in Post No 20.

yah..! i have tried but unfortunately it's also not woking...

and firmware version : DT1- R1.003

By the way 123.236.157.111 this is not., my modem iP: 192.168.1.1

and i have tried for PVC01 also but unfurtunately is also not woking.

try this firmware.
122.166.105.80 - /Firmwares/Binatone/Firmwares/DT815 Single Port/

DTI-A4005.ras