Results 1 to 6 of 6

Thread: Auto login using wireline BB using ut300r2 (reliance) for tata sky VOD service

  1. #1
    Junior Member
    Join Date
    Jan 2012
    Liked
    0 times
    Posts
    4

    Default Auto login using wireline BB using ut300r2 (reliance) for tata sky VOD service

    Aim is to auto login using modem so that I dont have to enter username and password.

    I tried using following link
    mp.bsnl.co.in/bb/ut300r2/ut300r2.htm

    But setup option is not available with my modem.

    I think firmware of my modem is not latest as Modem was installed 5 years back.

    Primary reason for autologin is, I would like to enjoy VOD services of tata sky where there is no option if entering username and password.

    Please assist.

  2. #2
    LEARNER
    Join Date
    Aug 2007
    Liked
    28 times
    Posts
    15,323

    Default

    Your Normal BB connection will be PPPoE mode ( automatic)
    line )0_35 vpi/vci ) 0 and 35
    For Tatasky/VOD with the SAME Modem dialer mode is given
    on a different VPI . probably 0_33 VPI/ 0 and VCI 33.

    You can not have both links accessing at the same time.
    Interchange mode and try.

    Confirm modem you have is same as listed in MP web site.
    Feedback.

  3. #3
    Junior Member
    Join Date
    Jan 2012
    Liked
    0 times
    Posts
    4

    Default

    I am new to these vpi|vci concepts.

    My aim is to configure modem in such a way that whenever ethernet cable is attached to pc, it should have access to internet without authentication.

    If above works, replacing pc with tatasky digicomp will also work.

    My broadband connection is wireline and the modem is basic modem (ut300r2) provided by reliance.

    Thats what I understand in layman's language.

  4. #4
    LEARNER
    Join Date
    Aug 2007
    Liked
    28 times
    Posts
    15,323

    Default

    UPDATE:8.00PM
    Please await comments of @Just4Kix who has TataSky DTH connection.

    http://www.saveondish.com/forum/T-yo...asky-vod-rates
    Was available with "YOU" Broadband . till 31st Dec 2011
    Probably "YOU" gives IPTV mode .




    =========================================

    In your Broadband connection, you cannot access TataSky DTH
    signals.
    If you connect the Digicom ( settop Box as it is called ) to the ADSL BB
    line It will not work.
    2.
    replacing pc with tatasky digicomp will also work.
    [NO Not possible. .

    .My broadband connection is wireline and the modem is basic modem (ut300r2) provided by reliance.
    There is another mode called IPTV and set top box will be different].
    ( which can be connected to Internet Land line based )
    3..
    Clarify your set up.
    Manual for Digicomp.
    Download and Check the user manual.
    wait.....
    http://www.tatasky.com/tata-sky-helpdesk.html#download
    click the image.
    http://www.tatasky.com/UG%20-%20Humax%20WEB%20ENG.pdf
    Last edited by essbebe; 01-03-12 at 07:18 PM.

  5. #5
    Junior Member
    Join Date
    Jan 2012
    Liked
    0 times
    Posts
    4

    Default

    Thanks for the reply.

    These are the details of the wired modem I am using.


    Board ID: 96338L-2M-8M
    Software Version ID: V8.8.01.01
    Firmware Version: 3.04L.01.A2pB021c.d16m
    Bootloader (CFE) Version: 1.0.37-4.3

    LAN IP Address: 192.168.1.1
    MAC Address: 00-08-5C-70-9B-3C
    Default Gateway:
    Primary DNS Server: 192.168.1.1
    Secondary DNS Server: 192.168.1.1


    DSL Status

    Status SHOWTIME
    Mode ADSL2+
    Type

    Downstream Upstream
    Rate (Kbps) 1021 509
    SNR Margin (dB) 32.4 13.5
    Attenuation (dB) 16.5 23.1
    Output Power (dBm) 0.0 10.8
    Super Frames 40493 40491
    Super Frame Errors 0 1


    Wide Area Network (WAN) Setup

    Choose Add, Edit, or Remove to configure WAN interfaces.
    Choose Save/Reboot to apply the changes and reboot the system.

    VPI/VCI Service Protocol State Status IP Address Remove Edit
    0/32 br_0_32 Bridge Enabled Up
    8/35 br_8_35 Bridge Enabled Up
    0/35 br_0_35 Bridge Enabled Up
    8/81 br_8_81 Bridge Enabled Up
    0/100 br_0_100 Bridge Enabled Up
    14/24 br_14_24 Bridge Enabled Up


    Local Area Network (LAN) Setup

    Configure the DSL Router IP Address and Subnet Mask for LAN interface. Save button only saves the LAN configuration data. Save/Reboot button saves the LAN configuration data and reboots the router to make the new configuration effective.

    IP Address:
    Subnet Mask:



    Disable DHCP Server
    Enable DHCP Server
    Start IP Address:
    End IP Address:
    Leased Time (hour):


    DSL Settings

    Select the modulation below. (Notice: If you don't understand parameter below, please keep defalut settings.)


    G.Dmt Enabled
    G.lite Enabled
    T1.413 Enabled

    ADSL2 Enabled Bitswap Enabled
    AnnexL Enabled SRA Disabled
    ADSL2+ Enabled
    AnnexM Disabled

    Additionally, Reliance executive has asked me to request for 'direct log in service' i.e. no authentication. if this works I am sure I will be able to use VOD with existing connection.

  6. #6
    LEARNER
    Join Date
    Aug 2007
    Liked
    28 times
    Posts
    15,323

    Default

    Additionally,....... for 'direct log in service' i.e. no authentication. if this works I am sure I will be able to use VOD with existing connection

    Please see this link and follow the screen shots. ( ignore wireless pages )
    Chennai Telephones- Changing password in DataOne Pre-configured modem

    EDIT this line:
    0/35 br_0_35 Bridge Enabled Up
    feedback.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 12
    Last Post: 10-12-11, 05:11 PM
  2. How I Tackled Reliance Broadband Problems
    By doyi in forum Reliance Broadband
    Replies: 22
    Last Post: 07-01-11, 03:28 AM
  3. Reviews on Reliance Wimax, MTNL & Tikona WI-BRO
    By aditya_sharma in forum Broadband Internet Service Providers
    Replies: 23
    Last Post: 05-25-10, 10:55 AM