India Broadband

m0rphis

Thank u...linpagla

arifali_007

check this review out.

complaintsboard.com/complaints/reliance-wi-max-c12402.html

after reading this review I am affraid to take this connection, I have already suffered with similar problem in case of Sify

mouthshut.com/review/Sify_Broadband_Internet_Connection-127851-1.html

Even after being in Sillicon valley , we dont have any good broadband,
airtel and BSNL are OK, but its damn difficult to get connection of both.

-Arif

rlcs

hi friends,
i am facing worst problem for every 2hrs leased time expires. i have to run command "cmd /c ipconfig/renew" every 2hrs for renewing ip address automatically, today the leased time is only 8 min.i am getting headache, how to solve my problem and now at present there is no ip address assaigned automatically.dhcp server is down it seems. i call r-care they said there is problem country wide , wait for 7 pm , but its now 30 min past 7pm. but no conectivity ,do anyone are facing same problem .

vishy

Morphis, Can u share the information of setting up the linksys router. I tried setting it up using the cd but sometime I was able to connect to use the net and the wireless is still not working.

m0rphis

While setting up the Linksys Router using the Setup CD, a while later the router will prompt for access to the Internet. You have to first connect your system to the internet before setting up LAN n Broadband sharing using the linksys router. After you have your Linksys router attached to your NIC n the Wi-max RJ45 plugged into ur Router open up ur Browser n kip trying to connect to the internet, at some point of time u'l find the reliancebroadband.co.in page popping up...hit ur username n password n login, now u'l b connected to the internet, after having done this go back to the Router setup page n continue, i hope dis helps...in my case dis helped me, n also remember the following things during ur router setup:-
1> INTERNET CONNECTION TYPE---> AUTOMATIC CONFIGURATION-DHCP
2> ROUTER IP---->192.168.1.1(default)
3> NETWORK ADDRESS SERVER SETTINGS---> DHCP-->ENABLE

BASIC WIRELESS SETTINGS--->
1>Wireless Network Mode--->MIXED
2>Wireless Network Name (SSID): Nething of ur choice like ur name
3>Wireless Channel: 11-2.462GHZ
4>Wireless SSID Broadcast:its ur choice

I hope dis helps, if it does not, reply me bak i'l surely tell u some other options which im sure will help u get out of dis problem

shiteej

Dude the scne is i use wimax..firstly i dont have any modem..the connetcion comes directly from the antenna placed on my terrace..i just have an adaptor for giving it the power..if i then attach the ethernet cable to my desktop it connects to the net very easily and works very efficiently..i really like the way it works ..no complains..now the problem arises from the fact that when i want to connect the router as i want use wifi connection also for my laptop.

i use a linksys wireless-N broadband router (model WRT300N V1).Now when i connect the Reliance ethernet cable in the internet port behind my router..connect my router through an extra ethernet cable i have... to my pc..and then connect the router through my browser..(192.168.1.1..my or generally all router ip's)change the settings under the basic setup tab from static to automatic dhcp save the settings and then shut my browser..restart my comp..and then when i come to my browser the reliance broadnet loggin page appears ..which means my router is taking the ip properly (may b, this is what i think)but when i enter the user id and password ..it says "authentication failed"...now when i unplug the reliance cable which is in my router and put it in my pc directly as it was before,then the same login page appears ..and after entering my password and id ..it connects and there r no issuses... tried calli reliance..asked them to reset my password..didnt work ..still was gettin "authentication failed". also there r no problems in my router ..works properly at my office.. jus dont know wht the problem could be?
could help any further?

regards,
Shiteej

shiteej

Also i forgot to mention that during my settings of the router i set the basic ip settings to automatic and manually enter the 3 dns servers below which i got from command promt (cmd) and ipconfig/all .also i use vista home premium..so i have ip settings as ipv6 and ipv4 ...and ipv4 is the one to be used..pl help dude..really want to hook this up dam badly

m0rphis

I must admit dat ur r using a preety good router available in the market today, ok now coming to the main point....u hav configured ur router but not appropriately, just do the following couple of alterations to wht u hav configured...

1) Map ur router MAC address with ur DESKTOP MAC address

2) Donot manually configure the DNS servers, let the ROUTER do it

Im pretty sure the above alterations wud surely solve ur problem...

SpArK

hi
can u help me plz

i got 64kbps of speed
and download speed it just 10 kbps and less them that
what to doooo ?

himanshu.v.gupta

I have Reliance connection in pune Ghorpodi area.

MY lan cable when connected doesnt transfer any signal and message is displayed that the lan cable unplugged.

I have tried to get the problem rectified by calling call centre and he even traced the service guy in my locality in pune but they didnt bother. It seems i have to correct the problem myself.

I have a new connection and on 900 plan of unlimited download.

Need help.