Thread: Linksys WRT54GL for reliance broadband

Hi

Has any body been able to configure WRT54GL with reliance broadband. If yes, can you please share the steps to do the same.

thanks
KK

Okay to do that follow these steps:

1. Connect the cable that comes from the Reliance modem to the Internet/WAN port of the router.
2. Now you will have 4 LAN Ports available with the router. Connect one of them to your network card of your PC or Laptop.
3. Now turn to your PC.CLick on START-->RUN--> type "cmd"--> type ipconfig /all and hit enter.. you shud details as follows:
Ip address:192.168.1.100
subnet mask:255.255.255.0
default gateway:192.168.1.1
and many other details... just note the "physical address" somewhere for your reference coz you would need it.. eg. 00-WR-SD-24-33-AE
4. Open IE and in address bar type in 192.168.1.1 and a Username / Password screen pops out. type "Admin" for both and hit enter. You are now on the Router set up page.
5. There will be an option for IP on the first page. make it 192.168.1.2 instead of 192.168.1.1 (default)
6. On the SUB-TAB you will have MAC address or CLONE MAC.. click on that and you will see a new screen. click the radio button to enable mac clone and then type the same physical address that you have copied from the PC.
7. Now go to the status tab and chk if you are getting an IP of 124 series or 125 series... if yes then you are online. Open an IE window and type in any website.. it will take you to the reliance website for your authentication..

IF this doesnt work.. you can call me at 9845654900

Best
Sunil

Hi Karan,

Did you get your problem solved...?

Hi Sunil,

Thanks a lot man!! I always had problems with Linksys WRT + Reliance....I made it work by entering DNS server names in 192.168.1.1 and by cloning the MAC address.... worked for a few weeks but not since a couple of days, not sure why, I tried a lot of things and finally tried your MAC address fix and it started working......Thanks again

Could anybody share the Broadnet Consumer package (limited transfer) using a router such as Linksys WRT54Gx? I see a couple of workarounds suggested by other users via MAC cloning, but would this work if i do not have Reliance modem/CPE, since i did not need a phone line, i have taken only internet brought to me via Cat 5 cable. Thanks!

Please do not forget to enable wireless security. I repeat this all the time - just to make the point.

Originally Posted by sunil.nv

Okay to do that follow these steps:

1. Connect the cable that comes from the Reliance modem to the Internet/WAN port of the router.
2. Now you will have 4 LAN Ports available with the router. Connect one of them to your network card of your PC or Laptop.
3. Now turn to your PC.CLick on START-->RUN--> type "cmd"--> type ipconfig /all and hit enter.. you shud details as follows:
Ip address:192.168.1.100
subnet mask:255.255.255.0
default gateway:192.168.1.1
and many other details... just note the "physical address" somewhere for your reference coz you would need it.. eg. 00-WR-SD-24-33-AE
4. Open IE and in address bar type in 192.168.1.1 and a Username / Password screen pops out. type "Admin" for both and hit enter. You are now on the Router set up page.
5. There will be an option for IP on the first page. make it 192.168.1.2 instead of 192.168.1.1 (default)
6. On the SUB-TAB you will have MAC address or CLONE MAC.. click on that and you will see a new screen. click the radio button to enable mac clone and then type the same physical address that you have copied from the PC.
7. Now go to the status tab and chk if you are getting an IP of 124 series or 125 series... if yes then you are online. Open an IE window and type in any website.. it will take you to the reliance website for your authentication..

IF this doesnt work.. you can call me at 9845654900

Best
Sunil

Hi Sunil,

Thanks for the detailed steps. I had subscribed to this thread but I'm not sure why didn't receive notifications for updates.

I went ahead and bought WRT54GL and the good news was it worked out of the box. I just selected DHCP as the option for service provider protocol and boom... that's it I got the reliance broadband loging page!

Thanks everybody for the help!

Happy surfing!

bye
Karan

Worked well but did not need to key in the MAC address. I think what worked was changing the default gateway to 192.168.1.2 and some powering up and down a couple of times. and yes, also the reset button for 30 seconds. Works quite well.
Thanks.

Hello bhagwalo,

Seems ur is a recent and succesful attempt to get wifi router configured with reliance wimax.

I am in bangalore and wanna setup wifi router. Can you suggest the model no. u used and steps for configuration.

thanks in advance.

jk_don

I have reliance broadband connection.

Help me out to change or configure NetGEAR DG834G adsl2 modem instead of reliance modem.

//Moderator note: You have not activated your account. Please click on the link in the mail you received from the forum admin in your mailbox. Failure to do so will cause all your posts go into moderation. - just4kix

@chakri9p

1.Mention the modem model supplied by Reliance.___________

2/How do you connect ??

(a)Using a "Dialer" ____________
(b)or Internet gets connected
immediately you switch on the system ?_____________________

3 Do you have installation Cd for the Netgear DG834g? ________-.

4. Just Change the RJ11 cable from present modem
to Netgear.
try Wizard.

Originally Posted by karan_intouch

Hi Sunil,

I just selected DHCP as the option for service provider protocol and boom... that's it I got the reliance broadband loging page!

This worked for me thanks. It was simple and easy.

Logout - Do the wiring as suggested in the linksys manual. Login. Select Automatic DHCP and save.

2 alternatives
Goto RUN - type cmd -
type ipconfig/flushdns -
type ipconfig/release -
type ipconfig/renew

2nd alternative - Double click on your 2 computer icon in the status bar - goto Support and then renew

Originally Posted by sunil.nv

Okay to do that follow these steps:

1. Connect the cable that comes from the Reliance modem to the Internet/WAN port of the router.
2. Now you will have 4 LAN Ports available with the router. Connect one of them to your network card of your PC or Laptop.
3. Now turn to your PC.CLick on START-->RUN--> type "cmd"--> type ipconfig /all and hit enter.. you shud details as follows:
Ip address:192.168.1.100
subnet mask:255.255.255.0
default gateway:192.168.1.1
and many other details... just note the "physical address" somewhere for your reference coz you would need it.. eg. 00-WR-SD-24-33-AE
4. Open IE and in address bar type in 192.168.1.1 and a Username / Password screen pops out. type "Admin" for both and hit enter. You are now on the Router set up page.
5. There will be an option for IP on the first page. make it 192.168.1.2 instead of 192.168.1.1 (default)
6. On the SUB-TAB you will have MAC address or CLONE MAC.. click on that and you will see a new screen. click the radio button to enable mac clone and then type the same physical address that you have copied from the PC.
7. Now go to the status tab and chk if you are getting an IP of 124 series or 125 series... if yes then you are online. Open an IE window and type in any website.. it will take you to the reliance website for your authentication..

IF this doesnt work.. you can call me at 9845654900

Best
Sunil

HERE I HAVE GOT METHOD TO CONNECT TO RIL WITH WIFI ROUTHER

Its pretty simple to share reliance wimax broadband using a Linksys WRT54G Wifi router. Just follow the below steps and its working fine at our end.

1. Connect the ethernet (RJ-45) cable (white colour) coming out from Power over Ethernet (POE) to WAN port of the router. At back side of the router your can see 5 RJ-45 ports, out of this 1 for WAN and rest 4 for LAN.
2. Connect your network card of desktop pc or laptop to any of the LAN port of the router.
3. Switch off the power to POE
4. Go to >>>Control panel >> Network >> Local Area Connection >>> Properties >>> Internet Protocol (TCP/IP) >>> Properties >>> Select obtain IP address automatically.
5. Go to Command prompt and type ipconfig/all you should get the details as below

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.1.100
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1

6.Open your browser (IE / Firefox) and type 192.168.1.1 in the address bar and press ENTER
7. It will prompt for username and password type “admin” for both username and password. Now you are under settings page of your router.
8. Under Setup >>> Basic Setup ,Change the Local IP Address from 192.168.1.1 to 192.168.1.2 (This is very important, because the Subscriber Station (receiver or SS) will have ip address as 192.168.1.1 )
9.Under Setup >>> MAC Address Clone >>> Enable >>> Click “Clone your PC’s MAC” . Then Save settings.
10.Switch on the power to POE and allow atleast 2 mins to complete hand shaking.
11. Under Status >>> Router >>> you can see as below

Login Type: Automatic Configuration - DHCP
IP Address: 123.xxx.xxx.xxx
Subnet Mask: 255.255.xxx.0
Default Gateway: 123.xxx.xxx.1
DNS 1: 220.225.236.84
DNS 2: 220.225.236.85
DNS 3: 202.138.96.47
MTU: 1500

Thats it now you have configured your Wifi router to share your Reliance Wimax Broadband.