Thread: Reliance ZTE2726 installation on Linux, Ubuntu 10.04

Would anyone have any info on howto install the Reliance Broadband Datacard ZTE2726 on Linux OS - Ubuntu 10.04, Lucid Lynx?
Help would be appreciated

Have you tried connecting it to your system with Ubuntu installed?
It might automatically identify the device. If it doesn't please, report back.

Hi Arnaud,
lsusb gives: Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 19d2:fff5 ONDA Communication S.p.A.
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External)
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 046d:09a4 Logitech, Inc. QuickCam E 3500
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Thought 10.04 would be able to pick it up; but NO. After many errors in install of Lucid Lynx, just completed a reinstall. This time around, thought would ask for help first. usb-modeswitch is available in Synaptic; but not installed.
Thanks in adv for further help

You will have to use usb_modeswitch.

Just found a pretty good guide: Reliance Netconnect Broadand Data Card On Linux - Observations - Reliance Mobile (CDMA & GSM) - Discussion Forums

Hope that it will help you.

Thank you Arnaud. Will check the site given by you in the next few days & come back.