Thread: TATA WIMAX BB FEEDBACK and Request for router configuration password !

Hello All,

I am using TATA WM BB (256Kbps unlimited postpaid) for last one week in bangalore. I did bit of searching before choosing my ISP. Most of the forums suggested me not to get TATA. But, only very few posts supported to buy. Later I found that, it is the case with all other ISPs. So, I registered for TATA and got connection in 3 days although they said about 15 days. So, far the connection is good with out any server down. Regarding the download speed, sometimes I used to get >30 KB. I think it all depends on your signal strength and signal strength is around 23.

I would like to request the existing TATA postpaid subscribers to provide me the default user name and password for router configuration web interface. Please let me know if you know the details. I tried with admin but no use.

Thanks and Regards,
Bala

Usually it is admin/admin for most routers. But WiMax routers may be different. What router do you have?

Its the default one supplied by TATA.
StarMAX 2150


PowerDsine - PD-3001 PPPOE

Thanks.

hello,

How can I manage the StarMAX 2150 subscribers station? Do we have a telnet login or any management (either GUI app or HTML based GUI) software to login to the subscribers station and test the performance and signal strengh?

Thanks and Regards
Ananth

You can use support/support to login.

Originally Posted by bala-linux

Hello All,

I am using TATA WM BB (256Kbps unlimited postpaid) for last one week in bangalore. I did bit of searching before choosing my ISP. Most of the forums suggested me not to get TATA. But, only very few posts supported to buy. Later I found that, it is the case with all other ISPs. So, I registered for TATA and got connection in 3 days although they said about 15 days. So, far the connection is good with out any server down. Regarding the download speed, sometimes I used to get >30 KB. I think it all depends on your signal strength and signal strength is around 23.

I would like to request the existing TATA postpaid subscribers to provide me the default user name and password for router configuration web interface. Please let me know if you know the details. I tried with admin but no use.

Thanks and Regards,
Bala

hi Bala,

I am planning on taking tata wimax in bangalore and was told that they dont have the wireless router and i hv to buy it myself. Could you tell me where did u get ur router from?

thanks,
Bhavna

VSNL may be the first to test wimax but my experience has been very bad ,

The starmax device used for this service has gone through many bugs in its software. They claim the latest release a M version is a stable one , I dont think so .

When the Signal is good its speed as good as wireline .

VSNL / TATA call centre and complaint mgmt process is pathetic , you have wait for 16 mins to talk to agent

The field team is not capable to troubleshoot the issues effectively

I have tried using it for past one month , it worked well for 1 day till now , the field team has come to my place 3 times , no resolution yet ,

In all if you want to try Wimax from VSNl , take a chance on your luck & fate is in God's Hands!!

Take a postpaid connection , they dont attend well to prepaid customers

They dont provide a recipet for connection payment unless you demand , so I doubt they are doing some fishy bussiness . I have not got one yet , The sales person doesnot attend your call after he takes the sale from you,

ALL Together VSNL / TATA Wimax is not yet a stable matured service in market , Ask them a wireline solution & if you are in Banglore there is no option for it , so better solution is a Airtel Broadband ,

Originally Posted by bhavnas

hi Bala,

I am planning on taking tata wimax in bangalore and was told that they dont have the wireless router and i hv to buy it myself. Could you tell me where did u get ur router from?

thanks,
Bhavna

Hi,

I have not buy anything other than provided by Tata. Starmax is the one provided by them. For the past two days, my internet connection is not upto the mark. Looking the better speed in few days.

Thanks and Regards,
Bala

hi usually the Starmax SS has a mgmt Ip

Put 192.168.1.10/24 on you PC ethernrt

telnet 192.168.1.1

there are many usernames admin/admin support/support

But the one u can use to configure is root/telsimawl . You can try to add BS etc

some commands

configure bs add <freq> <bw> <bsnmae>
ex : configure bs add 3316000 3000 bs1

sh bs - for showing bs status

The values should be be around -23 and 44 with qam16 modulation

sh ip wimax - to see if the ss is recieving DHCP mgmt IP

sh conf -

copy run start

reboot

Thats much I know , Dont try to tweak much as the SS box is a piece of scrap and there is no point playing with it . Just dump Tata connection and look for a wired connection for now , Thats the best that ISPs in India are used to and can troubleshoot rather than with a suckign WIMAX moot !!

regards,
rush2dan

Originally Posted by danny

hi usually the Starmax SS has a mgmt Ip

Put 192.168.1.10/24 on you PC ethernrt

telnet 192.168.1.1

there are many usernames admin/admin support/support

But the one u can use to configure is root/telsimawl . You can try to add BS etc

some commands

configure bs add <freq> <bw> <bsnmae>
ex : configure bs add 3316000 3000 bs1

sh bs - for showing bs status

The values should be be around -23 and 44 with qam16 modulation

sh ip wimax - to see if the ss is recieving DHCP mgmt IP

sh conf -

copy run start

reboot

Thats much I know , Dont try to tweak much as the SS box is a piece of scrap and there is no point playing with it . Just dump Tata connection and look for a wired connection for now , Thats the best that ISPs in India are used to and can troubleshoot rather than with a suckign WIMAX moot !!

regards,
rush2dan

Thanks for reply.
I am now trying to configure the router to enable DHCP to share the internet connection.
Need to check whether the router is capable of running dhcp.
I request all of you to share your experiences.

Thanks and Regards,
Bala

Originally Posted by danny

hi usually the Starmax SS has a mgmt Ip

Put 192.168.1.10/24 on you PC ethernrt

telnet 192.168.1.1

there are many usernames admin/admin support/support

regards,
rush2dan

I got TataIndicom WiMax connection yesterday with static IP.
I tried to connect to the Starmax SS using telnet 192.168.1.1/2 but it is not connecting. I also tried opening URL http://192.168.1.1. But it is not connecting. How somebody guide me on this.

Thanks
Sam

This is only a basic Setup. You can change the values according to your wish and for more security. I have Initially tried with a Dlink router and it worked fine...The configuration is simple and straight forward in Dlink Router but I preffered a Cisco Router and purchased a LinkSys WRH54G model.

Follow the instructions from the router manual to change the Router Settings. Connect the cable from the PoE box "Data IN" port to the routers "Internet" port (Blue Port). Connect the LAN cable from the Ethernet Port (marked 1 - 4) behind the Router to your PCs network Card (RJ45 Interface). Once your Wireless link is UP you can remove this cable. Change the computer IP to 192.168.1.20 with default subnet mask. Open Internet Explorer and type http://192.168.1.1 (this is the default IP address of Linksys router)

--------------------------------------------------------------------------

Click WAN icon
Enter the username and Password (refer the manual for Username & password)

Select "Setup" from top Left corner

Enter the Values given by the service provider for the "Basic Setup"

INTERNET SETUP (e.g.)
Internet Connection Type : Select "Static IP from the drop down list"
Internet IP Address: 121.243.x.x (your Static IP provided by VSNL)
Subnet Mask: 255.255.255.x
Gateway: 121.243.x.x
Static DNS 1: input the first DNS IP address provided bythe service provider
Static DNS 2: input the Second DNS IP address provided by the service provider


Optional Settings
Leave this field as it is


NETWORK SETUP
Router IP
Local IP Address : 192.168.1.10
Note: remember this IP address. Next time you have to type http://192.168.1.10 to access the router configuration page.
Subnet Mask : 255.255.255.0

Server Settings (DHCP)
DHCP Server : Select "Enable"
Starting IP Address : 192.168.1.100 (Select Default Value - Avoid starting from 192.168.1.1)
MAC Binding : Dont change anything here.
Maximum Number of DHCP users: 50
Client Lease Time : 0
Default gateway : 0.0.0.0
WINS : 0.0.0.0

Time Settings
Don’t change the default settings

Don’t change the default values of "DDNS", "MAC Address Clone", "Advance Routing" and "WAN Port Configure" unless your are familiar with these settings.

--------------------------------------------------------------------------

From the Top Select "Wireless"
Basic Settings
Wireless network Mode : Mixed
Wireless Network Name (SSID) : MyNetwork
Wireless Channel : 6 - 2.437GHz
Wireless RF Control : Standard
Wireless SSID Broadcast : Enable
Wireless RF Scheduling : Disable
Wireless Security
Security Mode : WEP
Default Transmit key:1
WEP Encryption : 64 bits 10hex digits
Pass phrase : leave Blank and input a valid Hex key in the key 1: field
key 1: abcdef1234 ( Dont put this value - Jumble the characters and remember this value)

Leave MAC Filtering and Advance Settings

-----------------------------------------------

Leave "Security", "Access Restrictions” and "Applications and Gaming" with the default values.

---------------------------------------------

Click on Administration from the "Management Option" and change the Router Password . Enable Wireless Web management Access and disable Remote management. Leave all other settings with their default Values.

-----------------------------------------------

Click on “Save Settings” at the bottom. This will save the configuration and will reinitialize the router. You will loose the connection to the router at this time. Take the TCP/IP properties of your computer and change the settings to “Obtain an IP address automatically” and “Obtain DNS address automatically”. Reboot the Computer and verify the computer has obtained an IP from the router DHCP Lease.Type “ipconfig /all’ at command prompt to check this. To access the Router configuration page again type http://192.168.1.10
------------------------------------------------------------------------
If your PC/Laptop is not configured for a wireless connection, install the appropriate driver and enable the connection or take the help from the vendor. At this time you can remove the Input the key which you have entered in the router configuration page (Under Wireless security - key 1: ). To configure the Starmax box, refer to some other links given elsewhere in this thread. If you experience any problem, Switch off PoE, Router and computer. Reboot PoE first, Router second and computer third

whats the max with this connection ?

Originally Posted by bharath_india

whats the max with this connection ?

This is a 256kbps plan and on an average I am getting 230kbps. It all depends on the signal strength and quality of the signal at your place.

Hi Bala,

1. I am having reliance Wimax in KR PURAM since Dec'07. I would have happily used it only for 1 month in TOTO. Planning to shift to Tata. Can u suggest about the performance.

2. I need the contacts for getting a new connection.

3. How much do they charge initially.

Ganesh
gpganesh@gmail.com

Hi Sam,

I wanna go for a new connection at KR PURAM. Need to know the contacts for approaching. and the cost details.

Can you please update me on this front.


GANESH
gpganesh@gmail.com

Hi Ganesh,

Sorry, I just saw your reply.

I dont have any contact details, you can get one from the tata indicom site.

price: I paid around 4.5K as advance payment for 4 months and got free 3 months offer. IIRC the monthly amount is 1000 + tax.

Sam

Originally Posted by samueldotj

Hi Ganesh,

Sorry, I just saw your reply.

I dont have any contact details, you can get one from the tata indicom site.

price: I paid around 4.5K as advance payment for 4 months and got free 3 months offer. IIRC the monthly amount is 1000 + tax.

Sam

now that 3 months free offer is not there any more
you pay 4 months advance and the installation change is waved off

Originally Posted by samueldotj

I got TataIndicom WiMax connection yesterday with static IP.
I tried to connect to the Starmax SS using telnet 192.168.1.1/2 but it is not connecting. I also tried opening URL http://192.168.1.1. But it is not connecting. How somebody guide me on this.

Thanks
Sam

Hi,

I need to setup the PPPOE mode and connect my wireless router to the modem. I too am not able to connect to the starmax modem. Telnet says "could not open connection on the port 23". I ran a port scanner on the box which found that both port 23 (telnet) and SSH are blocked. How to login to the modem now?

Please help ASAP.

Thanx !!!

Originally Posted by aks1981

Hi,

I need to setup the PPPOE mode and connect my wireless router to the modem. I too am not able to connect to the starmax modem. Telnet says "could not open connection on the port 23". I ran a port scanner on the box which found that both port 23 (telnet) and SSH are blocked. How to login to the modem now?

Please help ASAP.

Thanx !!!

To login to configure the Telsima antenna do the following;-

1. set pc ip to 192.168.1.10 (anything but 192.168.1.1)
2. Open a browser type http:\\192.168.1.1
3. ID root and pwd is telsimawl

Let me know if it works.. It does for me .. I Got a Telsima 2105 antenna and a Power-Dsine POE box... POE and PPPOE are 2 different things so pls confirm.

Cheers
Nik

Originally Posted by babraham

This is only a basic Setup. You can change the values according to your wish and for more security. I have Initially tried with a Dlink router and it worked fine...The configuration is simple and straight forward in Dlink Router but I preffered a Cisco Router and purchased a LinkSys WRH54G model.

Follow the instructions from the router manual to change the Router Settings. Connect the cable from the PoE box "Data IN" port to the routers "Internet" port (Blue Port). Connect the LAN cable from the Ethernet Port (marked 1 - 4) behind the Router to your PCs network Card (RJ45 Interface). Once your Wireless link is UP you can remove this cable. Change the computer IP to 192.168.1.20 with default subnet mask. Open Internet Explorer and type 192.168.1.1(this is the default IP address of Linksys router)

--------------------------------------------------------------------------

Click WAN icon
Enter the username and Password (refer the manual for Username & password)

Select "Setup" from top Left corner

Enter the Values given by the service provider for the "Basic Setup"

INTERNET SETUP (e.g.)
Internet Connection Type : Select "Static IP from the drop down list"
Internet IP Address: 121.243.x.x (your Static IP provided by VSNL)
Subnet Mask: 255.255.255.x
Gateway: 121.243.x.x
Static DNS 1: input the first DNS IP address provided bythe service provider
Static DNS 2: input the Second DNS IP address provided by the service provider


Optional Settings
Leave this field as it is


NETWORK SETUP
Router IP
Local IP Address : 192.168.1.10
Note: remember this IP address. Next time you have to type 192.168.1.10 to access the router configuration page.
Subnet Mask : 255.255.255.0

Server Settings (DHCP)
DHCP Server : Select "Enable"
Starting IP Address : 192.168.1.100 (Select Default Value - Avoid starting from 192.168.1.1)
MAC Binding : Dont change anything here.
Maximum Number of DHCP users: 50
Client Lease Time : 0
Default gateway : 0.0.0.0
WINS : 0.0.0.0

Time Settings
Don’t change the default settings

Don’t change the default values of "DDNS", "MAC Address Clone", "Advance Routing" and "WAN Port Configure" unless your are familiar with these settings.

--------------------------------------------------------------------------

From the Top Select "Wireless"
Basic Settings
Wireless network Mode : Mixed
Wireless Network Name (SSID) : MyNetwork
Wireless Channel : 6 - 2.437GHz
Wireless RF Control : Standard
Wireless SSID Broadcast : Enable
Wireless RF Scheduling : Disable
Wireless Security
Security Mode : WEP
Default Transmit key:1
WEP Encryption : 64 bits 10hex digits
Pass phrase : leave Blank and input a valid Hex key in the key 1: field
key 1: abcdef1234 ( Dont put this value - Jumble the characters and remember this value)

Leave MAC Filtering and Advance Settings

-----------------------------------------------

Leave "Security", "Access Restrictions” and "Applications and Gaming" with the default values.

---------------------------------------------

Click on Administration from the "Management Option" and change the Router Password . Enable Wireless Web management Access and disable Remote management. Leave all other settings with their default Values.

-----------------------------------------------

Click on “Save Settings” at the bottom. This will save the configuration and will reinitialize the router. You will loose the connection to the router at this time. Take the TCP/IP properties of your computer and change the settings to “Obtain an IP address automatically” and “Obtain DNS address automatically”. Reboot the Computer and verify the computer has obtained an IP from the router DHCP Lease.Type “ipconfig /all’ at command prompt to check this. To access the Router configuration page again type 192.168.1.10
------------------------------------------------------------------------
If your PC/Laptop is not configured for a wireless connection, install the appropriate driver and enable the connection or take the help from the vendor. At this time you can remove the Input the key which you have entered in the router configuration page (Under Wireless security - key 1: ). To configure the Starmax box, refer to some other links given elsewhere in this thread. If you experience any problem, Switch off PoE, Router and computer. Reboot PoE first, Router second and computer third

Thank you for giving such a detailed explaination...... I could complete all steps of Router Configuration as you mentioned...... My connection is a Reliance's WiMAX with a PoE box...... So your description exactly matches my case.......

Now after having configured the Router, my Laptop gets an IP 192.168.1.100...... Is this IP ok??? and if it is, then still my Internet is not working...... The WAN icon in the Router Setup page shows my ISP's IP...... (123.xxx.yyy.zzz)..... So is it ok for my Laptop to have a different IP like 192.168.1.100....... (I understand that the Network Address Translation servers should do the job of Local and Global IP mapping/translation, is that right...??).... But finally the internet is not working..... Where could the problem be...??

Plus, my laptop has a Intel Pro(R)/Wireless 3945ABG Network Connection hardware...... There's a big Red cross on that icon..... Seemingly to suggest that there's no wireless connectivity present..... Do I have to configure anything for this hardware item to detect & establish Wireless network connectivity....?? When I check its properties, it shows that this hardware is running ok...... Currently, I have only my laptop getting connected to the router...... I did all the configurations with the RJ45 Cat 5 cable connected between the Router and my laptop....... When should one remove that cable and go wireless.....??? How should I find out whether the Router is transmitting wireless....??

Here is a very detailed Tata wimax broadband review New Delhi (Tata wimax broadband connection review)

I hope you would find it useful in making your decision about which isp to go for

Can anyone help me with portforwarding for uTorrent? I could not forward my port...

root/telsimawl doesnt works for me, although admin/admin does but I cant make lot of changes with admin login.

I guess may be because its a different model ? here;s the version info from modem page

Version Info
Firmware Version B8313O1.3.0_v4.2.319
Software Version v4.2.319
Hardware FSL8313 CPE

this is the tag on antenna

hxxp://icddelhi.org/scan.jpg

Anybody knows what model this is and whats the password for root login

yes i know it doesn't relate to ur query, but can you tell what are the frequency and band settings on which Tata wimax operates.