Thread: How to configure Linksys WRT54G wireless router for Tataindicom broadband?

Have purchased Linksys WRT54G wireless router, and trying to configure for Tata Indicom Broadband but getting error to acquire the IP. I have followed the steps given in the handbook.


Please help me to resolve this problem...

Connect the LAN port of your TATA Indicom modem/router to the internet port of WRT54G via an ethernet LAN (RJ45) cable. COndigure WRT54G as follows:

- if TI modem/router is configured in PPPoE mode, configure WRT54G in Automatic DHCP (bridge) mode. Follow the WRT54G steps from this guide: http://www.indiabroadband.net/bsnl-b...onnection.html (Solution for multiple machines connecting to same BB connection)

- if TI modem/router is configured in bridge mode, configure WRT54G in PPPoE mode. Follow the WRT54G steps from this guide: http://www.indiabroadband.net/bsnl-b...er-wrt54g.html (Setup of ADSL Modem/Router UT-300R2U with Linksys Wireless Router WRT54G)

Originally Posted by dipak_kulkarni

Have purchased Linksys WRT54G wireless router, and trying to configure for Tata Indicom Broadband but getting error to acquire the IP. I have followed the steps given in the handbook.


Please help me to resolve this problem...

http://www.indiabroadband.net/tata-i...-settings.html (Tata Indicom Telenet Tndsl 2120 Router And Linksys Wireless Router Settings)

1) Your ADSL router (given by tataindicom) should be having IP of 192.168.1.1. Just ensure that the wireless router IP not in 192.168.1.* series.
2) Open up your router home page. Initally for Linksys wireless router it will be having a default IP of 192.168.1.1. change it to 192.168.2.1 and that should do the trick.

Thanks Ranjit. It worked for me.

Thanks Ranjit for your support I wasted around 5 days...now I almost know all the IP address

Hi guys. I have not been given any device by tata. Instead a lan cable is given which is supposed to be attached to my computer's lan port. I tried and was able to configure in static ip mode in my linksys wrh54g router. Trying to set it up in pppoe mode but have not met with any success yet.

All help is most welcome to configure in pppoe. Please guide.

thx ranjit..it worked for my frd too.....his model was linksys wrt54g2...

Originally Posted by veryindian

Hi guys. I have not been given any device by tata. Instead a lan cable is given which is supposed to be attached to my computer's lan port. I tried and was able to configure in static ip mode in my linksys wrh54g router. Trying to set it up in pppoe mode but have not met with any success yet.

All help is most welcome to configure in pppoe. Please guide.

I Have the same setup. (Ethernet cable/No modem). I have Static IP and have made the connections and configured the router for static IP. My setup works sometimes.. There is a indicator on the Belkin router that shows you whether router is connected to the Internet. Most of the times, it shows connected, but my Vista laptop keeps responding "Local only" connection instead of "Local & Internet' and I never get the web dialer page. After multiple resets of the router/comp, it may or may not work.
To make matters worse, our tata engineer insists that they have to bind MAC, which means I can use only one device at a time. SO I have now bound my router's MAC. When the wireless connection fails, I can not connect at all!

There was a mention about using "MER"instead of PPPoE, by a member here for Reliance.
will update later after search.
2.
Mention model number of Belkin WIFI router .
3.
Post this data; copy /paste here ( NO EDIT)
START RUN type cmd OK
New Window
type ipconfig /all

I am also having similar ethernet cable connection, not able to configure sucking TI Broadband from 2 week on Lynksys WRT54GH router.

i have TATA WIMAX connection of 750kbps
but i dont have static IP

what will be settings of ROUTER WRT45G...?

For WIMAX , mention details of the modem supplied by ISP.
Understand you dial with USERID/PW everytime you want to connect to your ISP.

For a normal ADSL modem connection:
After connecting to Internet , transfer the rj45 from computer end to
Linksys WAN/Internet port.
Connect another RJ45 from LAN1 to computer etc.
details for WRT54G on your feedback.

.