Activating Tata Indicom Photon+

Step 1.Insert Photon+ Device into USB Port of your PC or laptop.

Step 2.It will install drivers and two drives appear one as Access Manager CDROM and other as Removable Disk.

Step 3.Access Manager Installer will run else open Access Manager CDROM and open AutoRun.exe file and install software.

Step 4.Huawei Access Manager icon will appear on Desktop.

Step 5.Run Huawei Access Manager program.

Step 6.Click Activate Button.

Step 8.Enter number as *228.

Note: Turn on the speakers as it will make a call and you have to listen the options.

Step 9.Enter the OTA Password as 0000 and press Verify

Step 10.Select the preferred option for language.

Step 11.Chose the Type of Connection.

Step 12.The device will be programmed and your number is announced.

Step 13.Close the Access Manager Program and remove the Photon+ Device and plug it in USB after 5 minutes.

Wow, Thanks much DrBrains....

Originally Posted by DrBrains

Step 8.Enter number as *228.

Note: Turn on the speakers as it will make a call and you have to listen the options.

Step 9.Enter the OTA Password as 0000 and press Verify

I don't hear anything after typing 228 ;-)
Once I put 0000 and click Verify - I receive "Activation failed" message. If I put any other number instead of 0000 - it will say that the verification code is wrong.

So my modem still doesn't work and Tata Indicom doesn't want to help

This thread is also a good read : Tata Indicom Photon+