Thread: 2 desktop , 1 Tata Photon +

Hey All,

I have 2 desktop at my home which are inter-connected via 8 port switch and RJ 45 jacks and CAT-5 cable.
Now I want to use my newly bought TATA PHOTON+ simultaneously with both the desktop.
can anybody pls help ?

Also, 1 PC has Windows 7 and other has XP , so in which one should I plug my data card ?

CAN BE DONE BY SHARING THE TATA DIAL UP CONNECTION.

CAN BE DONE BY SHARING THE DIAL UP CONNECTION OF TATA PHOTON (BRIDGE MODE) FROM NETWORK CONNECTIONS.

It can be done by using the CCProxy Software. Google it. Their website has the tutorial too.

I have read on the internet that a modem is available through you can share a usb modem (eg:Tata Photon) with more than one computer.



Share the internet connection from a USB modem.

I have given you the literature( at the bottom) and the link of EBAY.IN,where it is available for purchase.

Broadband USB modems like Reliance Broadband+ and Tata Photon+ are easily available. But only one PC can use the internet at a time, unless you get a Wireless router with USB port like this one. Plus the USB broadband modem in (you will have to configure it with username, password for the first time using a PC), and you can have your own personal Wi-Fi hotspot. Depending on the speed of the connection, upto three people can easily share the connection. And if you get a DC to AC adapter for your car, you can even use it while on the move - a moving Wi-Fi hotspot in your car!

eBay India: SMC N Wireless 3G Broadband Router - Reliance USB Modem (item 380242760562 end time 12-Sep-2010 16:56:10 IST)


Hope this helps.

Refer this link also for Edimax make.
Share the internet connection from a USB modem.

I have a Tata Photon Card and an Airlive Air3G router. Need help with setting it up. In the Internet settings page, it asks for "Service Name".

What should it be for Tata Photon?
I have tried photon.ttml.in but so far havn't succeeded in connecting. It would be great if you could share the settings to use.

Thanks in advance!

Airlive AIR3G to use with Tata Photon.

]Important Notice:
The default IP address is 192.168.1.254 DHCP server is "on" by default
The default SSID is: airlive
The default user name is: admin
The default password is: airlive
The default wireless mode is : "3G Router" mode
The Passive POE Port is "LAN1".
This device does not come with 3G modem.
It is designed to work with 3G/3.5G/UMTS/EVDO/HSDPA USB dongles.
For latest compatibility list, please visit AirLive: Wireless, Switch, IP Camera Networking.

Installation Procedure: 1. Connect the antennas to the Air3G.
2. Connect your 3G USB Dongle to the Air3G
3. If you have other broadband connection, please connect the line to the
WAN port.
4. Connect the power adapter to the "Power" plug on the unit.
5. Connect your PC to one of the "LAN" port using an Ethernet cable.
6. Open your browser and type "192.168.1.254" to access the web
management interface
7. For more information, please refer to the User's Guide on the CD.

I think it is not possible.
How can you do step No 3 ?
Presume Tata Photon is inserted in USB Port of computer.
See post No 6 also.
FAQ:http://www.airlive.com/support/suppo...D1217473992975

You may need a unit like this.
Insert USB module to connect different systems.

Essbebe,

My router supports both 3G and broadband. So #3 is possible.
I think I need either a change in logon settings or a firmware upgrade.

It would be great if someone using Tata Photon card using a router could post his settings for "Service name" and user-id format (just the 10-digit number or 10-digits@photon.ttml.in?).

Thank you for responding.

My router supports both 3G and broadband. So #3 is possible

Ok. check whether it is an USB port.
Probably No 2 may be possible.
2. Connect your 3G USB Dongle to the Air3G

It is designed to work with 3G/3.5G/UMTS/EVDO/HSDPA USB dongles.
For latest compatibility list, please visit AirLive: Wireless, Switch, IP Camera Networking

.


Feedback.