India Broadband Forum

Admin · 10-08-08, 04:08 PM

I would like to know if there is a way to get rid of this tata wimax login page and make it always on without having to login manually every time?

Its a pain to login every time and some times it does take a min or so to load initially.

Any leads on how to do it? Or if you have already done this please share with all of us.

smoothvibes · 10-08-08, 05:05 PM

i have already tried to make DUN connection for same but it is not helping at all, even i am looking for a dialer or something which can help coz it is very annoying to open IE everytime to login and to keep that shitty window open all the time

I had a word with Tata for same and even they do not have any option to connect and have already tried tata indicom broadband dialer to connect but that is also not helping in this case

satyaakam · 10-13-08, 05:30 PM

ask your friendly helpdesk guy ;-) , he should be able to set it up that way for you . I have got connection which is always on.

cheers
Satya

smoothvibes · 10-13-08, 05:34 PM

how and whats the trick, is it a DUN connection or a dialer or any other setting.
please post here so that everyone can get benifit of that

Admin · 10-13-08, 05:54 PM

I called up helpdesk and they say there is nowa they can do it. Would you mind sharing with us how you managed to do it?

sai_ck · 10-14-08, 03:09 PM

i had requested help desk for the same. they had given me the static ip today only. i need to check in the evening

fairgame · 10-14-08, 06:19 PM

login using Google Chrome and if you close the login window, u'll be still connected

anuplinux · 10-14-08, 07:44 PM

Yeah, there is an option to remove the login page, and get ur connection as "Always connected".

I wanted to route the TATA wimax connection through my Netgear wireless router, so i had to remove the login page. Login page removal took just 1 day. They also provided me with a static IP and NATing was also enabled on the same request.

01-06-09, 04:47 PM

Hey Admin, u can do one thing for not to wait long for login page to open. Just open the the login page and put it on favourites and from ther copy it to the desktop as shortcut. So, whenever you will boot ur machine just click on this shortcut it will put u directly to the login page. But, u won't be able to be online always by this and I suggest always online is not a good idea.

01-06-09, 05:06 PM

Put the Login page in "favourites' and then copy it as desktop shortcut and whenever u will click on it will redirect u to the login page and it won't take long time.

If U want to speed up ur internet speed......
To speed up the Internet connection speed we need to configure a special buffer in the computer's memory in order to enable it to better deal with interrupts made from the NIC (Network Interface cards) or LAN Card:
(This tip is only recommended if you have 256MB RAM or higher.)

STEP#1:Identify the IRQ used by the NIC/USB modem
Follow these steps:

Open the System Information tool by running MSINFO32.EXE from the Run command.

Expand System Summary > Hardware Resources > IRQs.

Look for the listing made for your NIC (in my case - Realtek 81xxx Ethernet NIC+ Management Adapter). Note the IRQ next to the specified line (in my case - IRQ21).

Step #2 : Modify the system.ini file
Follow these steps:

Run SYSEDIT.EXE from the Run command.

Expand the system.ini file window.

Scroll down almost to the end of the file till you find a line called [386enh].

Press Enter to make one blank line, and in that line type

IrqX=4096

where X is the designated IRQ number we found in step #1, in my case it's IRQ21.

Click on the File menu, then choose Save.

Close SYSEDIT and reboot your computer.

Done. Speed improvement will be noticed after the computer reboots.

cyberbaba · 01-09-09, 09:58 PM

1. Call the Tech Support no and ask them to give u a Static IP
2. Ask them to "Bypass the login page" (Can only be done with a Static IP)

Then the moment you boot your system ur online no authentication bullshit.. Thats how i am currently setup.. POE box to my Linksys router.. and amm ny Laptops in the network work just fine.

Cheers,
Nik

Admin · 01-09-09, 10:07 PM

nr.ash can you please explain this stuff furthur because I dont get it atall... not that you havent explained it properly but its just me not being a techie myself dont get it atall... could you please explain in laymans terms about what would this do to the connection and why/how and how much faster would the connection become?

Has anyone tried it?

01-06-09, 04:47 PM	#9
nr.ash Guest Posts: n/a	Hey Admin, u can do one thing for not to wait long for login page to open. Just open the the login page and put it on favourites and from ther copy it to the desktop as shortcut. So, whenever you will boot ur machine just click on this shortcut it will put u directly to the login page. But, u won't be able to be online always by this and I suggest always online is not a good idea. Last edited by nr.ash; 01-06-09 at 09:05 PM.

01-06-09, 05:06 PM	#10
nr.ash Guest Posts: n/a	TATA Login Put the Login page in "favourites' and then copy it as desktop shortcut and whenever u will click on it will redirect u to the login page and it won't take long time. If U want to speed up ur internet speed...... To speed up the Internet connection speed we need to configure a special buffer in the computer's memory in order to enable it to better deal with interrupts made from the NIC (Network Interface cards) or LAN Card: (This tip is only recommended if you have 256MB RAM or higher.) STEP#1:Identify the IRQ used by the NIC/USB modem Follow these steps: Open the System Information tool by running MSINFO32.EXE from the Run command. Expand System Summary > Hardware Resources > IRQs. Look for the listing made for your NIC (in my case - Realtek 81xxx Ethernet NIC+ Management Adapter). Note the IRQ next to the specified line (in my case - IRQ21). Step #2 : Modify the system.ini file Follow these steps: Run SYSEDIT.EXE from the Run command. Expand the system.ini file window. Scroll down almost to the end of the file till you find a line called [386enh]. Press Enter to make one blank line, and in that line type IrqX=4096 where X is the designated IRQ number we found in step #1, in my case it's IRQ21. Click on the File menu, then choose Save. Close SYSEDIT and reboot your computer. Done. Speed improvement will be noticed after the computer reboots. Last edited by nr.ash; 01-06-09 at 05:42 PM. Reason: Automerged Doublepost

01-09-09, 09:58 PM	#11
cyberbaba Junior Member Join Date: Aug 2008 Posts: 3 Rep Power: 0	To make your connection "Always on" 1. Call the Tech Support no and ask them to give u a Static IP 2. Ask them to "Bypass the login page" (Can only be done with a Static IP) Then the moment you boot your system ur online no authentication bullshit.. Thats how i am currently setup.. POE box to my Linksys router.. and amm ny Laptops in the network work just fine. Cheers, Nik

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Password for TATA wimax	gardencityboy	Tata wimax	8	07-04-09 11:29 AM
Tata wimax broadband connection	Admin	Tata wimax	28	10-14-08 05:32 PM
MT841 and Tata Wimax	satyaakam	Tata wimax	7	09-12-08 12:39 PM
TATA wimax information want	cool_don	Tata wimax	2	08-28-08 10:57 PM
Reliance wimax and Tata wimax	Admin	Suggestions and Complaints	3	06-01-08 08:13 PM

India Broadband Forum

Tata wimax always on option

Tata wimax always on option

Similar Threads

10-08-08, 04:08 PM	#1
Admin Join Date: Jan 2006 Location: New Delhi Age: 32 Posts: 4,700 Rep Power: 12	Tata wimax always on option I would like to know if there is a way to get rid of this tata wimax login page and make it always on without having to login manually every time? Its a pain to login every time and some times it does take a min or so to load initially. Any leads on how to do it? Or if you have already done this please share with all of us.

10-08-08, 05:05 PM	#2
smoothvibes Aditya Join Date: Jul 2008 Location: New Delhi/ London Posts: 4,914 Rep Power: 11	i have already tried to make DUN connection for same but it is not helping at all, even i am looking for a dialer or something which can help coz it is very annoying to open IE everytime to login and to keep that shitty window open all the time I had a word with Tata for same and even they do not have any option to connect and have already tried tata indicom broadband dialer to connect but that is also not helping in this case

10-13-08, 05:30 PM	#3
satyaakam Junior Member Join Date: Apr 2008 Posts: 25 Rep Power: 2	ask your friendly helpdesk guy ;-) , he should be able to set it up that way for you . I have got connection which is always on. cheers Satya

10-13-08, 05:34 PM	#4
smoothvibes Aditya Join Date: Jul 2008 Location: New Delhi/ London Posts: 4,914 Rep Power: 11	how and whats the trick, is it a DUN connection or a dialer or any other setting. please post here so that everyone can get benifit of that

10-13-08, 05:54 PM	#5
Admin Join Date: Jan 2006 Location: New Delhi Age: 32 Posts: 4,700 Rep Power: 12	I called up helpdesk and they say there is nowa they can do it. Would you mind sharing with us how you managed to do it?

10-14-08, 03:09 PM	#6
sai_ck Junior Member Join Date: Oct 2008 Posts: 2 Rep Power: 0	i had requested help desk for the same. they had given me the static ip today only. i need to check in the evening

10-14-08, 06:19 PM	#7
fairgame Junior Member Join Date: Feb 2008 Age: 29 Posts: 7 Rep Power: 2	login using Google Chrome and if you close the login window, u'll be still connected

10-14-08, 07:44 PM	#8
anuplinux Junior Member Join Date: Oct 2008 Posts: 20 Rep Power: 2	Yeah, there is an option to remove the login page, and get ur connection as "Always connected". I wanted to route the TATA wimax connection through my Netgear wireless router, so i had to remove the login page. Login page removal took just 1 day. They also provided me with a static IP and NATing was also enabled on the same request.

01-09-09, 10:07 PM	#12
Admin Join Date: Jan 2006 Location: New Delhi Age: 32 Posts: 4,700 Rep Power: 12	nr.ash can you please explain this stuff furthur because I dont get it atall... not that you havent explained it properly but its just me not being a techie myself dont get it atall... could you please explain in laymans terms about what would this do to the connection and why/how and how much faster would the connection become? Has anyone tried it?