India Broadband Forum

matrix_neo · 02-05-09, 04:10 AM

HI EVERYONE
I AM NEW TO THIS FORUM AND AT PRESENT IS A BIT CONFUSED

...LAST WEEK I GOT MY TATA WIMAX POSTPAID CONNECTION INSTALLED WITH 384 KBPS -- ADVANCE RENAL Rs.4496 paid.I have got 2 pcs ....so can anyone temme is it poss. if i use a switch for it...

and tellme how can i access my cpe configuration page....the tataindicome technician installed a box(cpe) with this written on it...they just connected a wire from it to a ethernet power injector device from which a dataout cable been connected to my pc.I have seen that the there is one more point in the CPE which i thik is to connect the router etc.Please temme how can i access my cpe configuration page and one more thing.....once i saw on tatabroadband site that a static ip is free with every post paid connection...when i called the customer care they said that i wil have to buy it.PLZ someone tellme what should i do now.....i need a static ip coz i am a heavy downloader and i think it wud help me out in torrents as well....(say portforwarding)

THANX in advance

WIMAX OUTPUT CPE

MANUFACTURED BY : TELENET SYSTEMS PVT. LTD

MODEL NO. : WX - D - FS - 03
TWX 9800

cool_techie_tvm · 02-05-09, 05:45 AM

Did u try 192.168.1.1 ?

ashraf_zaidi · 02-08-09, 12:04 PM

hi

i suggest to use linksys router wrt54g2 as i am currently using it without nay issues. U can also check out other routers as well.
This is how u will configure the router

To summarize

Make sure that your Computer is configured with Dynamic IP.
You can check this by going to Control Panel> Network > Local Area Connection > Properties > Internet Protocol (TCP/IP) > Properties > Select obtain IP address automatically.
Now do the following:

1. Connect the cable from WAN port of the WRT54G2 to the Laptop LAN-port.
2. On a fresh page (Mozilla or IE or Chrome), type 192.168.1.100 in address-bar.
3. Login as admin/admin and Under Setup >>> Basic Setup ,Change the Local IP Address from 192.168.1.1 to 192.168.1.2.
4. Under Setup >>> MAC Address Clone >>> Enable >>> Click “Clone your PC’s MAC” . Then Save settings.
5. Connect the CABLE coming out of Reliance Modem to the Router Internet port.
6. Wait for some 2-3 minutes.
7. Open the page reliancebroadband.com Homepage.

It did not work for me yesterday while I was in hurry. I tried it today again and it worked in magic and I am all set to zoom..

All the Best...

matrix_neo · 02-10-09, 04:28 AM

well... i somehow figured out as how to access my configuration page... i manually entered I.P address as 169.254.1.2 with gate as 169.254.1.1 and open the open 169.254.1.1 in my browser ....it opend my configuration page... i checked there....it says the CPE is strictly configured in the bridged mode....and i cannot switch to the router mode as the option isnt highlighting......i cannot access the router mode configuration.... plz help me with this....and i tried using a d-link switch to connect 2 pcs... but couldnt coz when one is connected with login id and password ...and try to connect on the other at the same time ....tata login window opens and asks for login id and password again....how can i disable it....

chetak.kansara · 02-12-09, 06:13 PM

I wanted the same thing and I called up Tata customer care and asked them to help me configure the TATA model as a router. But the straightaway denied saying they can't do that. You wud have to add a new router to the exiting modem. I'm also strugling with the same but yet to do R & D.

cool_techie_tvm · 02-12-09, 06:41 PM

Quote:

Originally Posted by chetak.kansara

I wanted the same thing and I called up Tata customer care and asked them to help me configure the TATA model as a router. But the straightaway denied saying they can't do that. You wud have to add a new router to the exiting modem. I'm also strugling with the same but yet to do R & D.

Why would Tata restrict configuring the connection in the pppoe/router mode? Have u guys tried resetting the CPE/router initially supplied with the connection?

ashraf_zaidi · 02-14-09, 08:44 AM

peculiar issue. well do one thing, connect the lan cable from the tata poe to the computer. do ipconfig/all, let me know the readings of ethernet lan adapter...let me know the readings , maybe we can be of some help then.

02-17-09, 06:47 PM

strange indeed ... i think there was some misinterpretation in the conversation with CC

ashu.wifi · 03-01-09, 02:55 AM

Yeah even i cant change to router configs it goes blank they said u need to purchase an wireless router and then u can access it via 192.168.0.1 then it will be available but i dont believe

on TATA cc anymore...as they r just mindless machines which just talks too much

02-05-09, 04:10 AM	#1
matrix_neo Junior Member Join Date: Feb 2009 Location: delhi Posts: 8 Rep Power: 1	Help me with sharinf tata wimax connection HI EVERYONE I AM NEW TO THIS FORUM AND AT PRESENT IS A BIT CONFUSED ...LAST WEEK I GOT MY TATA WIMAX POSTPAID CONNECTION INSTALLED WITH 384 KBPS -- ADVANCE RENAL Rs.4496 paid.I have got 2 pcs ....so can anyone temme is it poss. if i use a switch for it... and tellme how can i access my cpe configuration page....the tataindicome technician installed a box(cpe) with this written on it...they just connected a wire from it to a ethernet power injector device from which a dataout cable been connected to my pc.I have seen that the there is one more point in the CPE which i thik is to connect the router etc.Please temme how can i access my cpe configuration page and one more thing.....once i saw on tatabroadband site that a static ip is free with every post paid connection...when i called the customer care they said that i wil have to buy it.PLZ someone tellme what should i do now.....i need a static ip coz i am a heavy downloader and i think it wud help me out in torrents as well....(say portforwarding) THANX in advance WIMAX OUTPUT CPE MANUFACTURED BY : TELENET SYSTEMS PVT. LTD MODEL NO. : WX - D - FS - 03 TWX 9800

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tata wimax broadband connection review	Admin	Tata wimax	84	11-11-09 05:25 PM
Tata Wimax connection speed	smoothvibes	Tata wimax	10	12-18-08 07:37 AM
How do you rate the TATA Wimax connection?	regit23	Tata wimax	4	12-05-08 07:34 PM
Dear friends don't go TATA Wimax connection	gauthamnaggg	Tata wimax	0	10-22-08 12:54 AM
Tata wimax broadband connection	Admin	Tata wimax	28	10-14-08 05:32 PM

02-05-09, 05:45 AM	#2
cool_techie_tvm Amor vincit omnia Join Date: Dec 2007 Posts: 2,682 Blog Entries: 4 Rep Power: 4	Did u try 192.168.1.1 ?

02-08-09, 12:04 PM	#3
ashraf_zaidi Junior Member Join Date: Nov 2008 Posts: 93 Rep Power: 2	hi i suggest to use linksys router wrt54g2 as i am currently using it without nay issues. U can also check out other routers as well. This is how u will configure the router To summarize Make sure that your Computer is configured with Dynamic IP. You can check this by going to Control Panel> Network > Local Area Connection > Properties > Internet Protocol (TCP/IP) > Properties > Select obtain IP address automatically. Now do the following: 1. Connect the cable from WAN port of the WRT54G2 to the Laptop LAN-port. 2. On a fresh page (Mozilla or IE or Chrome), type 192.168.1.100 in address-bar. 3. Login as admin/admin and Under Setup >>> Basic Setup ,Change the Local IP Address from 192.168.1.1 to 192.168.1.2. 4. Under Setup >>> MAC Address Clone >>> Enable >>> Click “Clone your PC’s MAC” . Then Save settings. 5. Connect the CABLE coming out of Reliance Modem to the Router Internet port. 6. Wait for some 2-3 minutes. 7. Open the page reliancebroadband.com Homepage. It did not work for me yesterday while I was in hurry. I tried it today again and it worked in magic and I am all set to zoom.. All the Best...

02-10-09, 04:28 AM	#4
matrix_neo Junior Member Join Date: Feb 2009 Location: delhi Posts: 8 Rep Power: 1	well... i somehow figured out as how to access my configuration page... i manually entered I.P address as 169.254.1.2 with gate as 169.254.1.1 and open the open 169.254.1.1 in my browser ....it opend my configuration page... i checked there....it says the CPE is strictly configured in the bridged mode....and i cannot switch to the router mode as the option isnt highlighting......i cannot access the router mode configuration.... plz help me with this....and i tried using a d-link switch to connect 2 pcs... but couldnt coz when one is connected with login id and password ...and try to connect on the other at the same time ....tata login window opens and asks for login id and password again....how can i disable it....

02-12-09, 06:13 PM	#5
chetak.kansara Junior Member Join Date: Feb 2009 Age: 26 Posts: 2 Rep Power: 0	I wanted the same thing and I called up Tata customer care and asked them to help me configure the TATA model as a router. But the straightaway denied saying they can't do that. You wud have to add a new router to the exiting modem. I'm also strugling with the same but yet to do R & D.

02-14-09, 08:44 AM	#7
ashraf_zaidi Junior Member Join Date: Nov 2008 Posts: 93 Rep Power: 2	peculiar issue. well do one thing, connect the lan cable from the tata poe to the computer. do ipconfig/all, let me know the readings of ethernet lan adapter...let me know the readings , maybe we can be of some help then.

02-17-09, 06:47 PM	#8
saurav_k Guest Posts: n/a	strange indeed ... i think there was some misinterpretation in the conversation with CC

03-01-09, 02:55 AM	#9
ashu.wifi Junior Member Join Date: Sep 2008 Posts: 26 Rep Power: 0	Yeah even i cant change to router configs it goes blank they said u need to purchase an wireless router and then u can access it via 192.168.0.1 then it will be available but i dont believe on TATA cc anymore...as they r just mindless machines which just talks too much

India Broadband Forum

Help me with sharinf tata wimax connection

Help me with sharinf tata wimax connection

Similar Threads